Initiation of Surface and Interface Edge Cracks in Functionally Graded Ceramic Thermal Barrier Coatings
Source abstract
Abstract
The initiation of surface and interface edge cracks in functionally graded ceramic thermal barrier coatings resulting from the application of a thermal load is studied. For a given specimen configuration, the singular behavior of the thermal stresses is analytically determined in terms of a singularity power β and pseudo-stress intensity factors K1 and K2. Crack initiation at the surface at the interface is related to the surface temperature and the temperature difference between the surface of the coating and the substrate. The experimental results are used to provide Weibull curves for the probability of survival of plasma sprayed mullite and CoCrAlY coating systems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Purdue University, Ray W. Herrick Laboratories, School of Mechanical Engineering, West Lafayette, IN 47907
References (14)
Show source-provided references
1. Bogy, 1971, “Two Edge-Bonded Elastic Wedges of Different Materials and Wedge Angles Under Surface Tractions,” ASME Journal of Applied Mechanics, June, pp. 377–386.10.1115/1.3408786 ↗
2. Hattori T. , SakataS., HatsudaT., and MuakamiG., 1988, “A Stress Singularity Parameter Approach for Evaluating Adhesive Strength,” JSME International Journal, Series 1, Vol. 31, No. 4, pp. 718–723.10.1299/jsmea1988.31.4_718 ↗
3. Hillery, R. V., Pilsner, B. H., McKnight, R. L., Cook, T. S., and Hartle, M. S., 1988, “Thermal Barrier Coating Life Prediction Model Development,” NASA Report 180807.
4. Iancu O. T. , 1989, “Non-Singular Wedge Combinations at the Free edge of a Brazed Ceramic-Metal Joint,” Computers & Structures, Vol. 33, No. 3, pp. 873–878.10.1016/0045-7949(89)90262-9 ↗
5. Knesl, Z., A. Sramik, J. Kadourek, and F. Kroupa, 1991, “Stress Concentration at the Edges of Coatings on Tensile Specimens,” presented at the Mixed Mode Fatigue and Fracture Conference, Vienna, Austria, 1991.
6. Kokini K. , and TakeuchiY. R., 1994, “Initiation of Surface Cracks in Multilayer Ceramic Thermal Barrier Coatings Under Thermal Loads,” Journal of Material Science and Engineering A, Vol. 189, pp. 301–309.10.1016/0921-5093(94)90428-6 ↗
7. Kokini K. , ChoulesB. D., and Takeuchi, 1996, “Surface Thermal Cracking of Thermal Barrier Coatings due to Stress Relaxation: Zirconia vs. Mullite,” Journal of Surface and Coating Technology, Vol. 82, pp. 77–82.10.1016/0257-8972(95)02647-9 ↗
8. Leibert, C. H., and Miller, R. A., 1984, “Ceramic Thermal Barrier Coatings,” I&EC Product Research and Development, pp. 334–349.10.1021/i300015a004 ↗
9. Miller R. A. , and BerndtC. C., 1984, “Performance of Thermal Barrier Coatings in High Heat Flux Environments,” Thin Solid Films, Vol. 119, p. 195–202.10.1016/0040-6090(84)90534-0 ↗
10. Muakami G. , 1988, “A Stress Singularity Parameter Approach for Evaluating Adhesive Strength,” JSME International Journal, Series 1, Vol. 31, No. 4, pp. 718–723.10.1299/jsmea1988.31.4_718 ↗
11. Takeuchi, Y. R., 1991, “Thermal Fracture of Multilayer Ceramic Thermal Barrier Coatings,” M.S. Thesis, Purdue University.10.1115/92-GT-318 ↗
12. Takeuchi Y. R. , and KokiniK., 1994, “Thermal Fracture of Multilayer Ceramic Thermal Barrier Coatings,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 116, pp. 266–271.10.1115/1.2906803 ↗
13. Taylor, R. E., 1994, Thermophysical Properties Research Laboratory, Purdue University, Private communication.
14. Theocaris P. S. , 1974, “The Order of Singularity at a Multi-Wedge Corner of a Composite Plate,” Int. J. Engng. Sci., Vol. 12, pp. 107–120.10.1016/0020-7225(74)90011-1 ↗