journal article·1998-10-01

On the Chemo-Mechanical Polishing (CMP) of Si3N4 Bearing Balls With Water Based CeO2 Slurry

Ming Jiang, Nelson O. Wood, R. Komanduri

Publisher page

Abstract

Among various abrasives investigated for the chemo-mechanical polishing (CMP) of Si3N4 balls (Jiang, 1998), cerium oxide (CeO2) was found to be the most effective polishing medium (even superior to Cr203, Bhagavatula and Komanduri, 1996), yielding an extremely smooth and damage-free surface with a finish Ra of ≈4 nm and Rt of ≈40 nm. In this investigation, the underlying reasons for the superior finish with CeO2 were investigated. Various chemical reactions involved in CMP of Si3N4 balls with CeO2 were investigated (Gibbs free energy minimization) and a mechanism for the CMP is proposed. The two important functions that CeO2 performs in the CMP of Si3N4 are: 1. It participates directly in the chemical reaction (oxidization-reduction reaction) with Si3N4 workmaterial leading to the formation of a thin SiO2 layer, 2. The hardness of CeO2 is closer to that of the thin SiO2 layer formed on Si3N4 but significantly lower than Si3N4 workmaterial (≈1/3). It can thus remove the brittle SiO2 reaction product effectively without damaging the Si3N4 substrate as no abrasion can take place by CeO2 on Si3N4. The kinetic action, which involves the removal of the reaction products from the interface by subsequent mechanical action of flowing water and CeO2 is critical to CMP. The chemical reaction could proceed on a continuing basis so long as the passivation layers are removed by the mechanical action at the same time. CeO2 is found to be very effective in a water environment (hydrolysis) leading to the formation of additional SiO2 by reacting with Si3N4 thereby enhancing the CMP of Si3N4. Several similarities between polishing of Si3N4 and glass (SiO2) (Cook, 1990), including the polishing environment (CeO2 plus the magnetic fluid, pH value ≈6) and the mechanism of polishing were observed. Also, after investigating various reaction species in the CMP of Si3N4 with CeO2 and Cr203, the former is found to be much safer from an environmental point of view (Reddy and Komanduri, 1998).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical and Aerospace Engineering, Oklahoma State University, Stillwater, OK 74078

TASC, Midwest City, OK 73130

References (26)

Show source-provided references
1. Bhagavatula S. R. , and KomanduriR., 1996, “On the Chemo-Mechanical Polishing of Silicon Nitride with Chromium Oxide Abrasive,” Phil. Mag. A, Vol. 74/4, p. 10031003.
2. Cook L. M. , 1990, “Chemical Processes in Glass Polishing,”J. of Non-Crystalline Solids, Vol. 120, pp. 152-171.10.1016/0022-3093(90)90200-6 ↗
3. Fischer T. E. , and TomizawaH., 1985, “Interaction of Tribo-chemistry and Microfracture in the Friction and wear of Silicon Nitride,” Wear, Vol. 105, p.2929.10.1016/0043-1648(85)90004-3 ↗
4. Fischer T. E. , 1988. “Tribochemistry,” Ann. Rev. Mater. Sci., Vol. 18, p. 303303.10.1146/annurev.ms.18.080188.001511 ↗
5. Hah, S. R., 1995, “Tribochemical Polishing of Silicon Nitride,” Ph.D. thesis, Stevens Institute of Technology, Hoboken, NJ.
6. Hah, S. R., and Fischer, T. E., 1995, “The Chemistry of Tribochemical Polishing,” Chapter 4 in S. R. Hah, Ph.D thesis, Stevens Institute of Technology, Hoboken, NJ.
7. Hah, S. R., Fischer, T. E., and Burk, C., 1995, “Ceramic Bearing Development–Tribochemical Finishing of Silicon Nitride,” Vo. 4, Technical Roport No. WL-TR-96-4018, the Materials Directorate, Wright Patterson AFB, OH.
8. Jiang Ming, “Finishing of Si3N4 Balls for Bearing Applications,” Ph.D thesis, Mechanical & Aerospace Engineering, Oklahoma State University, Stillwater, OK (to be submitted).
9. Ming Jiang and KomanduriR., 1977a, “Finishing of Si3N4 Balls for Bearing Applications,”Wear, Vol.215, pp. 267-278.10.1016/S0043-1648(97)00236-6 ↗
10. Ming Jiang and KomanduriR., 1997b, “Application of Taguchi Method to Determine Polishing Conditions in Magnetic Float Polishing,”Wear, Vol. 213, pp. 59-71.10.1016/S0043-1648(97)00180-4 ↗
11. Kanno Y. , SuzukiK., and KuwaharaY., 1983, NH3 Formation Caused by the presence of H2O in the Wet Grinding of Silicon Nitride Powder,” Yog Yo-K yokai-Shi, Vol. 91, p.38638610.2109/jcersj1950.91.1056_386 ↗
12. Kikuchi, M., Takahashi Y., Suga, T., Suzuki, S., and Yasunaga, N., 1990, “Mechanochemical Polishing of Silicon Carbide,” Proc. Fall Meeting of JSPE, Vol. 327 (in Japanese.)
13. Kilbourn, BT., 1992, “CERIUM—A Guide to Its Role in Chemical Technology,” Molycorp, Inc., White Plains, NY.
14. Komanduri R. , UmeharaJ., and RaghunandanM., 1996, “On the Posibility of Chemo-Mechanical Polishing of Silicon Nitride,” ASME Journal of Tribology, Vol.118, p. 721721.10.1115/1.2831600 ↗
15. Mallika, K., and Komanduri, R., 1998, “Characterization of Si3N4 Balls in the As-received, Semi-Finished, Commercially Finished, and Finished by the MFP Process,” paper under preparation.
16. Reddy, R. G., and Komanduri, R., 1998, “On the Chemical Species in Chemo Mechanical Polishing of Si3N4 with Cr2O3,” paper under preparation.
17. Reed, T. B., 1971, Free Energy of Binary Compounds—An Atlas of Charats for High Temperature Chemical Calculations, MIT Press, Cambridge, MA.
18. Ruhle , 1997, “Microscopy of Structural Ceramics,” Adv. Materials, Vol. 9, No. 3, p. 195195.10.1002/adma.19970090304 ↗
19. Shaffer, P. T. B., 1964, Handbook of High-Temperature Materials—Material Index, Plenum Press, New York.10.1007/978-1-4899-6405-2 ↗
20. Tomizawa H. , and FischerT. E., 1987, “Friction and Wear of Silicon Nitride and Silicon Carbide in Water: Hydrodynamic Lubrication at Low Sliding Speed Obtained by Tribochemical Wear,” ASLE Trans., Vol. 30, No. 1, pp. 41–46.10.1080/05698198708981728 ↗
21. Vora H. , OrentT. W., and StokesR. J., 1982, “Mechano-Chemical Polishing of Silicon Nitride,” J. Amer. Ceram. Soc., Vol. 65, 9, p. C140C140.10.1111/j.1151-2916.1982.tb10517.x ↗
22. Wang J. C. , and HsuS. M., 1994, ASME J. of Tribology, Vol. 116, p. 423423.
23. Wallace T. W. , WuW. L., and CarpioR. A., 1996, Thin Solid Films, Vol. 280, p. 3737.10.1016/0040-6090(95)08178-X ↗
24. Wicks, C. E., and Block, F. E., 1963, “Thermodynamic Properties of 65 Elements—Their Oxides, Halides, Carbides, and Nitrides,” U. S. Dept. of Interior, Bureau of Mines, Bulletin No. 605.
25. Wyatt, O. H., and Dew-Hughes, D., 1974, Metals, Ceramics, and Polymers, Cambridge University Press, U.K.
26. Yasunaga, N., Tarumi, N., Obara, A., and Imanaka, O., 1979, “Mechanism and Application of the Mechanochemical Polishing Method Using Soft Powder,” Science od Ceramic Mechining and Surface Finishing II, B. J. Hockey, and R. W. Rice, eds., NBS Special Publication No. 562, Washington, D.C.; National Bureau of Standards, pp. 171-183.