journal article·1997-01-01

A New Method for Estimating Nonproportional Notch-Root Stresses and Strains

Randy J. Gu, Yung-Li Lee

Publisher page

Abstract

This paper presents a generalized two-step endochronic approach for estimating notch stresses and strains based on elastic stress solutions. In the first stress-controlled step, notch root strains are calculated from elastic stresses using a conventional uniaxial method, such as Glinka’s energy density method and Neuber’s rule. In the second strain-controlled step notch root stresses corresponding to the estimated local strains are calculated from the given material properties. Both stress-controlled and strain-controlled algorithms based on endochronic plasticity theory are presented herein. The proposed method is used to calculate multiaxial strains under monotonie and nonproportional loads. Various geometric constraints (plane stress, plane strain, and intermediate level) are also examined. The results are compared with experimental measurements by other researchers and with predictions from other models.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical stress and fatigue analysis · Fatigue and fracture mechanics · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Oakland University, Rochester, MI 48309

Stress Lab, Chrysler Corporation, Auburn Hills, MI 48326

References (15)

Show source-provided references
1. Barkey M. E. , SocieD. F., and HsiaK. J., 1994, “A Yield Surface Approach to the Estimation of Notch Strains for Proportional and Nonproportional Cyclic Loading,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 116, pp. 173–180.10.1115/1.2904269 ↗
2. Chaboche, J. L., and Rousselier, G., 1982, “On the Plastic and Viscoplastic Constitutive Equations, Part I: Rules Developed With Internal Variable Concept; Part II: Application of Internal Variable Concepts to the 316 Stainless Steel,” Inelastic Analysis and Life Prediction in Elevated Temperature Design, ASME PVP-Vol. 59, Baylac, G. ed., pp. 33–55.
3. Glinka G. , 1985, “Energy Density Approach to Calculation of Inelastic Strain-Stress Near Notches and Cracks,” Engineering Fracture Mechanics, Vol. 22, No. 3, pp. 485–508.10.1016/0013-7944(85)90148-1 ↗
4. Hoffman M. , and SeegerT., 1985, “A Generalized Method for Estimating Multiaxial Elastic-Plastic Notch Stresses and Strains Part 1: Theory, Part 2: Application and General Discussion,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 107, pp. 250–260.10.1115/1.3225815 ↗
5. Hsu S. Y. , JainS. K., and GriffinO. H., 1991, “Verification of Endochronic Theory for Nonproportional Loading Paths,” Journal of Engineering Mechanics, Vol. 117, No. 1, pp. 110–131.10.1061/(ASCE)0733-9399(1991)117:1(110) ↗
6. Lee Y. L. , ChiangY., and WongH. H., 1995, “A Constitutive Model for Estimating Multiaxial Notch Strains,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 117, pp. 33–44.10.1115/1.2804369 ↗
7. Marquardt D. W. , 1963, “An Algorithm for Least-Squares Estimation of Nonlinear Parameters,” SIAM Journal, Vol. 11, pp. 431–441.10.1137/0111030 ↗
8. Molski K. , and GlinkaG., 1981, “A Method of Elastic-Plastic Stress and Strain Calculation at a Notch Root,” Materials Science and Engineering, Vol. 50, pp. 93–100.10.1016/0025-5416(81)90089-6 ↗
9. Neuber H. , 1961, “Theory of Stress Concentration for Shear-Strained Prismatical Bodies with Arbitrary Non-linear Stress-Strain Law,” ASME Journal of Applied Mechanics, Vol. 28, pp. 544–550.10.1115/1.3641780 ↗
10. Press, W. H., Flannery, B. P., Teakolsky, S. A., Vetterling, W. T., 1986, Numerical Recipes The Art of Scientific Computing, Chapter 14, pp. 521–528.
11. Valanis K. C. , 1980, “Fundamental Consequence of a New Intrinsic Time Measure: Plasticity as a Limit of the Endochronic Theory,” Archives of Mechanics, Vol. 32, No. 2, pp. 171–191.
12. Valanis K. C. , and FanJ., 1983, “Endochronic Analysis of Cyclic Elastoplastic Strain Fields in a Notched Plate,” ASME Journal of Applied Mechanics, Vol. 50, pp. 789–794.10.1115/1.3167147 ↗
13. Valanis K. C. , and LeeC. F., 1984, “Endochronic Theory of Cyclic Plasticity with Applications,” ASME Journal of Applied Mechanics, Vol. 51, pp. 367–374.10.1115/1.3167627 ↗
14. Watanabe O. , and AtluriS. N., 1985, “A New Endochronic Approach to Computational Elastoplasticity: Example of a Cyclically Loaded Cracked Plate,” ASME Journal of Applied Mechanics, Vol. 52, pp. 857–864.10.1115/1.3169159 ↗
15. Wu H. C. , YaoJ. C., and ChuS. C., 1986, “Investigation of Endochronic Constitutive Equation Subject to Plastic Strain-Controlled Axial-Torsion Deformation,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 108, pp. 262–269.10.1115/1.3225879 ↗