Rate Dependent Deformation of Semi-Crystalline Polypropylene Near Room Temperature
Source abstract
Abstract
We examine the strain rate dependent, large plastic deformation in isotropic semi-crystalline polypropylene at room temperature. Constant strain rate uniaxial compression tests on cylindrical polypropylene specimens show very little true strain softening under quasi-static conditions. At high strain rates very large amounts (38 percent) of apparent strain softening accompanied by temperature rises are recorded. We examine the capability of a recently proposed constitutive model of plastic deformation in semi-crystalline polymers to predict this behavior. We neglect the contribution of the amorphous phase to the plastic deformation response and include the effects of adiabatic heating at high strain rates. Attention is focused on the ability to predict rate dependent yielding, strain softening, strain hardening, and adiabatic temperature rises with this approach. Comparison of simulations and experimental results show good agreement and provide insight into the merits of using a polycrystalline modeling assumption versus incorporating the amorphous contribution. Discrepancies between experiments and model predictions are explained in terms of expectations associated with neglecting the amorphous deformation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer crystallization and properties · Polymer Nanocomposites and Properties · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering and Applied Mechanics, The University of Michigan, Ann Arbor, MI 48109-2125
Mechanical Engineering, Center for Advanced Manufacturing, Clemson University, Clemson, S.C. 29634-0921
References (36)
Show source-provided references
1. Aboulfaraj M. , G’SellC., UlrichB., and DahounA., 1995, “In Situ Observation of the Plastic Deformation of Polypropylene Spherulites Under Uniaxial Tension and Simple Shear in the Scanning Electron Microscope,” Polymer, 36, 731–742.10.1016/0032-3861(95)93102-R ↗
2. Adams G. W. , and FarrisR. J., 1998, “Latent Energy of Deformation of Bisphenol A Polycarbonate,” J Poly Sci B, 26, 433–445.10.1002/polb.1988.090260216 ↗
3. Ahzi S. , LeeB. J., and AsaroR. J., 1994, “Plasticity and Anisotropy Evolution in Crystalline Polymers,” Mater Sci Eng A, 189, 35–44.10.1016/0921-5093(94)90399-9 ↗
4. Ahzi, S., Parks, D. M., and Argon, A. S., 1990, “Modeling of Plastic Deformation and Evolution of Anisotropy in Semi-Crystalline Polymers,” Computer Modeling and Simulation of Manufacturing Processes, eds., B. Singh et al., ASME MD-Vol. 20, 287–292.10.21236/ADA237288 ↗
5. Alberola N. , et al., 1995, “Tensile Mechanical Behavior of Quenched and Annealed Isotactic Polypropylene Films over a Wide Range of Strain Rates,” J Mater Sci, 30, 860–868.10.1007/BF01178418 ↗
6. Argon A. S. , 1973, “A Theory for the Low Temperature Plastic Deformation of Glassy Polymers,” Phil Mag, 28, 839–865.10.1080/14786437308220987 ↗
7. Arruda, E. M., 1992, “Characterization of the Strain Hardening Response of Amorphous Polymers,” PhD thesis. The Massachusetts Institute of Technology.
8. Arruda E. M. , and BoyceM. C., 1993, “A Three Dimensional Constitutive Model for the Large Stretch Behavior of Rubber Elastic Materials,” J Mech Phys Solids, 41, 389–412.10.1016/0022-5096(93)90013-6 ↗
9. Arruda E. M. , et al., 1995, “Effects of Strain Rate, Temperature and Thermo-mechanical Coupling on the Finite Strain Deformation of Glassy Polymers,” Mechanics of Materials, 19, 193–212.10.1016/0167-6636(94)00034-E ↗
10. Bartczak Z. , GaleskiA., ArgonA. S., and CohenR. E., 1996, “On the Plastic Deformation of the Amorphous Component in Semicrystalline Polymers,” Polymer, 37, 2113–2123.10.1016/0032-3861(96)85856-3 ↗
11. Bartczak Z. , ArgonA. S., and CohenR. E., 1994, “Texture Evolution in Large Strain Simple Shear Deformation of High Density Polyethylene,” Polymer, 35, 3427–3441.10.1016/0032-3861(94)90905-9 ↗
12. Bartczak Z. , CohenR. E., and ArgonA. S., 1992, “Evolution of the Crystalline Texture of High Density Polyethylene during Uniaxial Compression,” Macromolecules, 25, 46924692.10.1021/ma00044a034 ↗
13. Bartczak Z. , ArgonA. S., and CohenR. E., 1992, “Deformation Mechanisms and Plastic Resistance in Single-Crystal-Textured High-Density Polyethylene,” Macromolecules, 25, 50365036.10.1021/ma00045a034 ↗
14. Bellare A. , CohenR. E., and ArgonA. S., 1993, “Development of Texture in Poly(ethylene terephthalate) by Plane-Strain Compression,” Polymer, 34, 13931393.10.1016/0032-3861(93)90851-Z ↗
15. Dahoun, A., 1992, “Comportement Plastic et Textures de Deformation des Polymeres Semi-Cristallins en Traction Uniaxiale et en Cisaillement Simple,” Ph.D. Thesis, Intitut National Polytechnique de Lorraine, Nancy, France.
16. Dahoun, A., G’Sell, C., Phillipe, M. J., and Esling, J., 1991, International Conference of Deformation, Yield, and Fracture of Polymers, The Plastic and Rubber Institute, London, 68–71.
17. Dahoun A. , AboulfarajM., G’SellC., MolinariA., and CanovaG. R., 1995, “Plastic Behavior and Deformation Textures of Poly(etherether ketone) under Uniaxial Tension and Simple Shear,” Poly Eng Sci, 35, 317–330.10.1002/pen.760350406 ↗
18. Dahoun A. , CanovaG. R., MolinariA., PhilippeM. J., and G’SellC., 1991, “The Modeling of Large Strain Textures and Stress-Strain Relations of Polyethylene,” Textures and Microstructures, 14–18, 347–354.10.1155/TSM.14-18.347 ↗
19. Duckett, R. A., and Zihlif, A. M., 1974, “The Mode of Deformation of Oriented Polypropylene in Compression at Low Temperatures,” J Mater Sci Lett, 171–173.10.1007/BF00554775 ↗
20. Galeski A. , BartczakZ., ArgonA. S., and CohenR. E., 1992, “Morphological Alterations during Texture-Producing Plastic Plane Strain Compression of High-Density Polyethylene,” Macromolecules, 25, 57055705.10.1021/ma00047a023 ↗
21. G’Sell C. , BoniS., and ShrivastavaS., 1983, “Application of the Plane Simple Shear Test for Determination of the Plastic Behavior of Solid Polymers at large Strains,” J Mater Sci, 18, 903903.10.1007/BF00745590 ↗
22. G’Sell C. , and DahounA., 1994, “Evolution of Microstructure in Semi-Crystalline Polymers under Large Plastic Deformation,” Mater Sci Eng A, 175, 183–199.10.1016/0921-5093(94)91058-8 ↗
23. G’Sell C. , and JonasJ. J., 1979, “Determination of the Plastic Behavior of Solid Polymers at Constant Strain Rate,” J Mater Sci, 14, 583–591.10.1007/BF00772717 ↗
24. G’Sell C. , and JonasJ. J., 1981, “Yield and Transient Effects During the Plastic Deformation of Solid Polymers,” J Mater Sci, 16, 1956–1974.10.1007/BF00540644 ↗
25. Hasan O. A. , and BoyceM. C., 1993, “Energy Storage during Inelastic Deformation of Glassy Polymers,” Polymer, 34, 50855085.10.1016/0032-3861(93)90252-6 ↗
26. Hirsch J. R. , and WangP. T., 1991, “Texture and Strength Evolution in Deformed Polypropylene,” Textures and Microstructures, 13, 101–122.10.1155/TSM.13.101 ↗
27. Lee B. J. , AhziS., and AsaroR. J., 1995, “On the Plasticity of Low Symmetry Crystals Lacking Five Independent Slip Systems,” Mechanics of Mater, 51, 1–6.10.1016/0167-6636(94)00045-I ↗
28. Lee B. J. , ParksD. M., and AhziS., 1993, “Micromechanical Modeling of Large Plastic Deformation and Texture Evolution in Semi-Crystalline Polymers,” J Mech Phys Solids, 41, 1651–1687.10.1016/0022-5096(93)90018-B ↗
29. Lee B. J. , ArgonA. S., ParksD. M., AhziS., and BartczakZ., 1993, “Simulation of Large Strain Plastic Deformation and Texture Evolution in High Density Polyethylene,” Polymer, 34, 3555–3575.10.1016/0032-3861(93)90039-D ↗
30. Lee, B. J., Vecchio, K. S., Ahzi, S., and Schoenfeld, S. E., 1997, “Modeling of The Mechanical Behavior of Tantalum,” Met and Mater Trans A, in press.10.1007/s11661-997-0087-5 ↗
31. Liu T. M. , et al., “Plastic Deformation of Polypropylene,” Poly Eng Sci, 25, 19851985.
32. Lin L. , and ArgonA. S., 1992, “Deformation Resistance in Oriented Nylon 6,” Macromolecules, 25, 40114011.10.1021/ma00041a025 ↗
33. Parks D. M. , and AhziS., 1990, “Polycrystalline Plastic Deformation and Texture Evolution for Crystals Lacking Five Independent Slip Systems,” J Mech Phys Solids, 38, 701–724.10.1016/0022-5096(90)90029-4 ↗
34. Raha S. , and BowdenP. B., 1972, “Birefringence of Plastically Deformed Polymethylmethacrylate,” Polymer, 13, 174–183.10.1016/0032-3861(72)90042-0 ↗
35. Schoenfeld, S.E., Ahzi, S., and Vecchio, K. S., 1997, “Modeling Dynamic Behavior and Texture Evolution in Pure Tantalum,” Proceedings of ASME Winter Annual Meeting, Anaheim, CA, in press.
36. Vest, T. A., et al., 1987, “Modeling of Tensile Stress Strain Behavior in Semi-Crystalline and Amorphous Polymers,” V. K. Stokes and D. Krajcinovic, ed., Constitutive Modeling for Nontraditional Materials, American Society of Mechanical Engineers, 71–86.