Micromechanics Modeling of Electronic Composites
Source abstract
Abstract
The microstructure-macroproperty relation of electronic composites is studied by use of the Eshelby’s method which has been extended to treat the inclusion problem of thermal and electromagnetic behavior. Eshelby’s model has further been extended to the case of coupling behavior such as piezoelectric or pyroelectric behavior. When fillers embedded in the matrix are overlapped, the Eshelby’s model may not be applicable. Then one must use a percolation model, which is also discussed in this paper. Finally, the predictions based on these models are compared with experimental data to check the validity of the analytical modeling.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Composite Material Mechanics · Numerical methods in engineering · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, University of Washington, Box 352600, Seattle, WA 98195-2600
References (24)
Show source-provided references
1. Balberg J. , and BinenbaumN., 1983, “Computer Study of the Percolation Threshold in a Two Dimensional Anisotropic System of Conducting Sticks,” Phy. Rev., Vol. B28, pp. 3799–3812.10.1103/PhysRevB.28.3799 ↗
2. Bridge B. , FolkesM. J., and JahankhaniH., 1988, “Electrical Conduction Phenomena Between Adjacent Stainless Steel Fibres in a Thermoplastic Matrix,” J. Mater Sci., Vol. 23, pp. 1955–1960.10.1007/BF01115756 ↗
3. Brigg D. M. , 1978, “Mechanical, Thermal, and Electrical Properties of Metal Filler-Filled Polymer Composites,” Polymer Eng. Sci., Vol. 19, pp. 1188–1192.10.1002/pen.760191610 ↗
4. Benveniste Y. , 1987, “A New Approach to the Application of Mori-Tanaka Theory in Composite Materials,” Mech. Mater, Vol. 6, pp. 105–111.10.1016/0167-6636(87)90005-6 ↗
5. Cohen, M. H., Jontner, J., and Nebman, I., 1978, “The Electronic Properties of Inhomogeneous Materials; Metal-Nonmetal Transitions,” AIP Conf. Proc. No. 10: Electrical and Optical Properties of Inhomogeneous Media. J. C. Garland and D. B. Tanner eds., Am. Inst. Phys., New York, pp. 118–126.10.1063/1.31178 ↗
6. Dunn M. L. , and TayaM., 1992, “Micromechanics Predictions of the Effective Electroelastic Moduli of Piezoelectric Composites,” Intl. J. Solids Struct, Vol. 30(2), pp. 161–175.10.1016/0020-7683(93)90058-F ↗
7. Dunn M. L. , and TayaM., 1993, “An Analysis of Piezoelectric Composite Materials Containing Ellipsoidal Inhomogeneities,” Proc. Roy. Soc. London, Series A443, pp. 265–287.10.1098/rspa.1993.0145 ↗
8. Dunn M. L. , 1993, “Micromechanics of Coupled Electroelastic Composites Effective Thermal Expansion and Pyroelectric Coefficients,” J. Appl. Phys., Vol. 73(10), pp. 5131–5140.10.1063/1.353787 ↗
9. Eshelby J. D. , 1957, “The Determination of the Elastic Field of an Ellipsoidal Inclusion and Related Problems,” Proc. Roy. Soc. London, Series A244, pp. 376–396.10.1098/rspa.1957.0133 ↗
10. Furukawa T. , FujinoK., and FukadaE., 1976, “Electromechanical Properties in the Composites of Epoxy Resin and PZT Ceramics,” Japan J. Appl. Phys., Vol. 15, pp. 2119–2129.10.1143/JJAP.15.2119 ↗
11. Hatta H. , and TayaM., 1985, “Effective Thermal Conductivity of a Misoriented Short Fiber Composite,” J. Appl. Phys., Vol. 58, pp. 2478–2486.10.1063/1.335924 ↗
12. Hatta H. , and TayaM., 1986, “Equivalent Inclusion Method for Steady State Heat Conduction in Composites,” Intl. J. Eng. Sci., Vol. 24, pp. 1159–1172.10.1016/0020-7225(86)90011-X ↗
13. Kellog, O. D., 1953, Foundation of Potential Theory, Dover, New York.
14. Kirkpatrick S. , 1971, “Classical Transport in Disordered Media: Scaling and Effective Medium Theories,” Phy. Rev. Letts., Vol. 27, pp. 1722–1725.10.1103/PhysRevLett.27.1722 ↗
15. Mori T. , and TanakaK., 1973, “Average Stress in Matrix and Average Elastic Energy of Materials with Misfitting Inclusions,” Acta Metall., Vol. 21, pp. 571–574.10.1016/0001-6160(73)90064-3 ↗
16. Mura, T., 1987, Micromechanics of Defects in Solids, 2nd Ed., Martinus Nijihoff Pub., Dordrecht.10.1007/978-94-009-3489-4 ↗
17. Narita, K., 1992, “Piezoresistivity of a Conductive Short Fiber/non-Conductive Rubber Matrix Composite,” In Japanese, MS Thesis, Tohoku University, Japan.
18. Pike G. E. , and SeagerC. H., 1974, “Percolation and Conductivity: A Computer Study 1,” Phy. Rev., Vol. B10, pp. 1421–1434.10.1103/PhysRevB.10.1421 ↗
19. Taya M. , and UedaN., 1987, “Prediction of the In-Plane Electrical Conductivity of a Misoriented Short Fiber Composite: Fiber Percolation Theory vs. Effective Medium Theory,” J. Eng. Mater. Tech., Vol. 109, pp. 252–256.10.1115/1.3225972 ↗
20. Taya, M., 1988, “Modelling of Physical Properties of Metallic and Ceramic Composites: Generalized Eshelby Model,” Proc. 9th Riso Symp., S. I. Anderson, H. Lilholt, and O. B. Pedersen, eds., Riso National Laboratory, Denmark, pp. 201–231.
21. Taya, M., Ono, K., and Narita, K., 1994, Unpublished work.
22. Taya M. , 1994, “Foundation and Applications of Micromechanics Models for Prediction of Composite Properties,” Materia Japan, Vol. 33(3), pp. 217–304;10.2320/materia.33.409 ↗
23. Materia Japan, Vol. 33(4), pp. 409–416.
24. Ueda N. , and TayaM., 1986, “Prediction of the Electrical Conductivity of Two-Dimensionally Misoriented Short Fiber Composite By a Percolation Model,” J. Appl. Phys., Vol. 60, 459–461.10.1063/1.337778 ↗