Benchmark Cyclic Plastic Notch Strain Measurements
Source abstract
Abstract
Plastic strains at the roots of notched specimens of Inconel 718 subjected to tension-compression cycling at 650°C are reported. These strains were measured with a laser-based technique over a gage length of 0.1 mm and are intended to serve as “benchmark” data for further development of experimental, analytical, and computational approaches. The specimens were 250 mm by 2.5 mm in the test section with double notches of 4.9 mm radius subjected to axial loading sufficient to cause yielding at the notch root on the tensile portion of the first cycle. The tests were run for 1000 cycles at 10 cpm or until cracks initiated at the notch root. The experimental techniques are described, and then representative data for the various load spectra are presented. All the data for each cycle of every test are available on floppy disks from NASA.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Rocket and propulsion systems research · High-Velocity Impact and Material Behavior · Mechanical Engineering and Vibrations Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering Department, Louisiana State University, Baton Rouge, 70803
References
Reference metadata was not supplied for this record.