journal article·1996-10-01

Role of Welding Parameters in Determining the Geometrical Appearance of Weld Pool

R. Kovacevic, Z. N. Cao, Y. M. Zhang

Publisher page

Abstract

A three-dimensional numerical model is developed to describe the fluid flow and heat transfer in weld pools. Both full penetration and free deformation of the top and bottom weld pool surfaces are considered. Temperature distribution and fluid flow field are obtained. In order to analyze the influence of welding parameters on the geometrical appearance of weld pools, a normalized model is developed to characterize the geometrical appearance of weld pools. It is found that welding current can significantly affect the geometrical shape. When welding current increases, the curvature of the pool boundary at the trailing end increases. The effect of the welding speed on the geometrical appearance is slight, although its influence on the pool size is great. In the interest range of arc length (from 1 mm to 4 mm), the arc length can affect both the size and the shape of the weld pool. However, compared with the welding current and speed, its influences are much weaker. GTA welding experiments are performed to verify the validity of the numerical models. The appearance of weld pools was obtained by using machine vision and a high-shutter speed camera. It is found that the calculated results have a good agreement with the experimental ones.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes · Erosion and Abrasive Machining

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Center for Robotics and Manufacturing Systems, University of Kentucky, Lexington, KY 40506

References (26)

Show source-provided references
1. Kou S. , and LeY., 1985, “Grain Structure and Solidification Cracking in Oscillated Arc Welds of 5052 Aluminum Alloy,” Metall. Trans., Vol. 16A, p. 13451345.10.1007/BF02670338 ↗
2. Kou S. , and LeY., 1985, “Alternating Grain Orientation and Weld Solidification Cracking,” Metall. Trans., Vol. 16A, p. 18871887.10.1007/BF02670376 ↗
3. Kou S. , and LeY., 1985, “Improving Weld Quality by Low Frequency Arc Oscillation,” Weld. J., Vol. 64, p. 5151.
4. Kou S. , and LeY., 1988, “Welding Parameters and the Grain Structure of Weld Metal—A Thermaldynamic Consideration,” Metall. Trans., Vol. 19A, p. 10751075.10.1007/BF02628392 ↗
5. Savage W. F. , LundinC. D., and AronsonA. H., 1965, “Weld Metal Solidification Mechanics,” Weld. J., Vol. 44, pp. 175s175s.
6. Savage W. F. , and AronsonA. H., 1966, “Preferred Orientation in the Weld Fusion Zone,” Weld. J., Vol. 45, p. 85s85s.
7. Savage W. F. , LundinC. D., and ChaseT. F., 1968, “Solidification of Fusion Weld in Face-Centered Cubic Metals,” Weld. J., Vol. 47, p. 522s522s.
8. Savage , and HrubecR. J., 1972, “Synthesis of Weld Solidification Using Crystalline Organic Materials,” Weld. J., Vol. 51, p. 260s260s.
9. Zhang Y. M. , et al., 1993, “Determining Joint Penetration in GTAW with Vision Sensing of Weld-Face Geometry,” Weld. J., Vol. 72, p. 463s463s.
10. Zhang Y. M. , KovacevicR., and WuL., 1996, “Dynamic Analysis and Identification of Gas Tungsten Arc Welding Process for Full Penetration Control,” ASME Journal of Engineering for Industry, Vol. 118(1), p. 123–136.10.1115/1.2803633 ↗
11. Hoffman T. , 1991, “Real-Time Imaging for Process Control,” Advanced Material and Process, Vol. 140, p. 3737.
12. Kovacivic R. , ZhangY. M., and RuanS., 1995, “Sensing and Control of Weld Pool Geometry for Automated GTA Welding,” ASME Journal of Engineering for Industry, Vol. 117, p. 210–222.10.1115/1.2803297 ↗
13. Kovacevic, R., Zhang, Y. M., and Li, L., 1996, “Monitoring of Weld Penetration Based on Weld Pool Geometrical Appearance,” to appear in Research Supplement, Weld. J..
14. Zhang, Y. M., Li, L., and Kovacevic, R., 1995, “Dynamic Estimation of Full Penetration Using Geometry of Adjacent Weld Pools,” ASME Journal of Engineering for Industry, Submission.
15. Zacharia T. , et al., “Three-Dimensional Transient Model for Arc Welding Process,” Metall. Trans., Vol. 20B, p. 645645.10.1007/BF02655921 ↗
16. Thompson M. E. , and SzekelyJ., 1989, “The Transient Behavior of Weld Pools with a Deformed Free Surface,” Inter. J. of Heat and Mass Transfer, Vol. 32, p. 10071007.10.1016/0017-9310(89)90003-3 ↗
17. Choo R. T. C. , and SzekelyJ., 1990, “Modeling of High-Current Arc With Emphases on Free Surface Phenomena in the Weld Pool,” Weld. J., Vol. 69, p. 223s223s.
18. Tsai M. C. , and KouS., 1989, “Marangoni Convection in Weld Pools With a Free Surface,” Inter. J. of Numerical Methods in Fluid, Vol. 9, p. 15031503.10.1002/fld.1650091206 ↗
19. Kim J. W. , and NaS. J., 1994, “A Study on the Three-Dimensional Analysis of Heat and Fluid Flow in Gas Metal Arc Welding Using Boundary-Fitted Coordinates,” ASME Journal of Engineering for Industry, Vol. 116, p. 7878.10.1115/1.2901812 ↗
20. Kim S. D. , and NaS. J., 1992, “Effect of Weld Pool Deformation on Weld Penetration in Stationary Gas Tungsten Arc Welding,” Weld. J., Vol. 71, p. 179s179s.
21. Ohji T. , and NishiguchiK., 1983, “Mathematical Modelling of Molten Pool in Arc Welding of Thin Plate,” IIW DOC. 211-555-8383.
22. Tsai N. S. , and EagarT. W., 1985, “Distribution of the Heat and Current Flues in Gas Tungsten Arcs,” Metall. Trans., Vol. 16B, p. 841841.10.1007/BF02667521 ↗
23. Choi M. , and GreifR., 1987, “A Study of the Heat Transfer During Arc Welding With Applications to Pure Metals Temperature Materials,” Numerical Heat Transfer, Vol. 11, p. 477477.10.1080/10407788708913566 ↗
24. Patankar, S. V., 1980, Numerical Heat Transfer and Fluid Flow, McGraw-Hill, NY.
25. Woods R. A. , and MilnerD. R., 1971, “Motion in the Weld Pool in Arc Welding,” Weld. J., Vol. 50, p. 163s163s.
26. Heiple C. R. , and RoperJ. R., 1982, “Mechanism for Minor Element Effects on GTA Fusion Zone Geometry,” Weld. J., Vol. 61, p. 97s97s.