Determination of Sub-Surface Distributions of Residual Stresses by a Holographic-Hole Drilling Technique
Source abstract
Abstract
A method is described for combining incremental hole drilling with holographic interferometry to determine the distribution of in-plane residual stresses as a function of depth below the surface. The computational foundation of the method is summarized. Results of experiments to check the ability of the method to determine two different sub-surface stress distributions are given. Utilizing the same hologram, the feasibility of obtaining results at greater depths by drilling a large hole directly over a preceding smaller one is demonstrated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced machining processes and optimization · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Stanford University, Stanford, CA 94305-4021
References (26)
Show source-provided references
1. Bijak-Z˙ochowski M. , 1978, “A Semidestructive Method of Measuring Residual Stresses,” VDI Berichte, Vol. 313, VDI-Verlag, Du¨sseldorf, pp. 469–476.
2. Flaman M. T. , and HerringJ. A., 1985, “Comparison of Four Hole-Producing Techniques for the Center-Hole Residual Stress Measurement Method,” Exp. Tech., Vol. 9, No. 8, pp. 30–32.10.1111/j.1747-1567.1985.tb02036.x ↗
3. Flaman M. T. , and ManningB. H., 1985, “Determination of Residual-Stress Variation with Depth by the Hole-Drilling Method,” Exp. Mech., Vol. 25, No. 3, 1985, pp. 205–207.10.1007/BF02325088 ↗
4. Flaman M. T. , MillsB. E., and BoagJ. M., 1987, “Analysis of Stress-Variation-with-Depth Measurement Procedures for the Center-Hole Method of Residual Stress Measurement,” Exp. Tech., Vol. 11, No. 4, pp. 35–37.10.1111/j.1747-1567.1987.tb00422.x ↗
5. Gerald, C. F., and Wheatley, P. O., 1994, Applied Numerical Analysis, 5th ed., Addison Wesley, Reading, MA, p. 268.
6. Hampton R. W. , and NelsonD. V., 1992, “On the Use of the Hole Drilling Technique for Residual Stress Measurements in Thin Plate,” ASME Journal of Pressure Vessel Technology, Vol. 114, No. 3, pp. 292–299.10.1115/1.2929043 ↗
7. Ha¨usler, H., Ko¨nig, G. and Kockelmann, H., 1987, “On the Accuracy of Determining the Variation with Depth of Residual Stresses by means of the Hole-Drilling Method,” Residual Stresses in Science and Technology, Macherauch, E., Hauk, V., (eds.), DGM Informationgesellschaft Verlag, Oberursel, Germany, pp. 257–264.
8. Kelsey R. A. , 1956, “Measuring Non-Uniform Residual Stresses by the Hole-Drilling Method,” Proc SESA, Vol. 14, No. 1, pp. 181–194.
9. Makino, A., 1994, “Residual Stress Measurement Using Holographic Interferometry and Hole Drilling,” PhD dissertation, Mech Eng Dept., Stanford University, Stanford, CA.10.1007/BF02328443 ↗
10. Makino A. , and NelsonD., 1994, “Residual-Stress Determination by Single-Axis Holographic Interferometry and Hole Drilling—Part I: Theory,” Exp Mech., Vol. 34, No. 1, pp. 66–78.10.1007/BF02328443 ↗
11. Makino A. , NelsonD. V., FuchsE. A., and WilliamsD. R., 1996, “Determination of Biaxial Residual Stresses by a Holographic-Hole Drilling Technique,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 118, No. 4, pp. 583–588.10.1115/1.2805960 ↗
12. Nelson D. , MakinoA., FuchsE., and WilliamsD., 1994, “Residual-Stress Determination by Single-Axis Holographic Interferometry and Hole Drilling— Part II: Experiments,” Exp Meck., Vol. 34, No. 1, pp. 79–88.10.1007/BF02328444 ↗
13. Nawwar A. M. , and ShewchukJ., 1978, “On the Measurement of Residual Stress Gradients in Aluminum-Alloy Specimens,” Exp Mech., Vol. 18, No. 7, pp. 269–276.10.1007/BF02324168 ↗
14. Nickola, W. E., 1984, “Post-Yield Effects on Center-Hole Residual Stress Measurements,” Proc V Int Congress on Exp Mech., June 10–15, 1984, Montreal, SESA, Brookfield Ctr., CT; pp. 126–136.
15. Nickola, W. E., 1986, “Practical Subsurface Residual Stress Evaluation by the Hole-Drilling Method,” Proc 1986 SEM Spring Conf on Exp Mech., June 8–13, New Orleans, SEM, Bethel, CT, pp. 47–58.
16. Picaud J. , 1990, “De´termination des Contraintes Re´siduelles Automatisation par la Me´thode du Trou Incrementale,” Mate´riaux et Techniques, Vol. 78, No. 1–2, pp. 9–14.10.1051/mattech/199078010009 ↗
17. Radomski M. , and WhiteD. J., 1968, “Some Theoretical Considerations Relating to Strain Concentration in Elastic-Plastic Bending of Beams,” J Strain Analysis, Vol. 3, No. 4, pp. 304–312.10.1243/03093247V034304 ↗
18. SAEJ7842, 1971, “Residual Stress Measurement by X-Ray Diffraction,” Society of Automotive Engineers.
19. Schajer G. S. , 1981, “Application of Finite Element Calculations to Residual Stress Measurements,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 103, No. 2, pp. 157–163.10.1115/1.3224988 ↗
20. Schajer G. S. , 1988a, “Measurement of Non-Uniform Residual Stresses Using the Hole-Drilling Method Part I—Stress Calculation Procedures,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 110, No. 4, pp. 338–343.10.1115/1.3226059 ↗
21. Schajer G. S. , 1988b, “Measurement of Non-Uniform Residual Stresses Using the Hole-Drilling Method Part II—Practical Application of the Integral Method,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 110, No. 4, pp. 344–349.10.1115/1.3226060 ↗
22. Schajer G. S. , and AltusE., 1996, “Stress Calculation Error Analysis for Incremental Hole-Drilling Residual Stress Measurements,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 118, No. 1, pp. 120–126.10.1115/1.2805924 ↗
23. Soete W. , and VancrombruggeR., 1950, “An Industrial Method for the Determination of Residual Stresses,” Proc. SESA, Vol. VIII, No. 1, pp. 17–28.
24. TN-503-3, 1988, “Measurement of Residual Stresses by the Hole-Drilling Strain Gage Method,” Measurements Group, Inc., Raleigh, NC.
25. Vangi D. , 1994, “Data Management for the Evaluation of Residual Stresses by the Incremental Hole-Drilling Method,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 116, No. 4, pp. 561–566.10.1115/1.2904329 ↗
26. Vest, C. M., 1979, Holographic Interferometry, Wiley, New York, NY.10.1063/1.2995245 ↗