journal article·2008-04-01

On Predicting Nucleation of Microcracks Due to Slip-Twin Interactions at Grain Boundaries in Duplex Near γ-TiAl

D. Kumar, T. R. Bieler, P. Eisenlohr, D. E. Mason, M. A. Crimp, F. Roters, D. Raabe

Publisher page

Abstract

Simkin et al. (2003, “A Factor to Predict Microcrack Nucleation at Gamma-Gamma Grain Boundaries in TiAl,” Scr. Mater., 49(2), 149–154) proposed a relationship for predicting crack initiation in γ-TiAl in a scenario where a mechanical twin interacts with a grain boundary. This correlation (quantified using a fracture initiation parameter or fip) was based only on the geometry of the Burgers vectors as they are related to slip transfer across the grain boundary and the Mode I type opening force experienced by the grain boundary. Generally, a fip is a mathematical combination of factors that allow weak boundaries to be probabilistically identified in the context of a state of stress. This paper further develops this approach by considering the inclusion of the mismatch between the slip planes in the grain boundary and a parameter that accounts for the different elastic properties in adjoining grains. Also, the significance of primary twin (slip) systems versus secondary slip systems is assessed. When compared to fips that can be constructed through a variety of other combinations of nine geometrical parameters that could affect grain boundary damage nucleation, the fip obtained by multiplying Simkin’s original parameter by Emin∕Emax, the ratio of Young’s modulus in the stress direction in the two grains, is best able to distinguish between cracked and intact grain boundary populations. Cracked and intact boundaries are also characterized to assess tilt and twist character and whether they are low Σ (or coincident site lattice) boundaries (using a cubic criterion). It is also shown that fips based on Σ values or the tilt and twist character of the boundary lead to an unacceptably high probability of incorrectly distinguishing between cracked and intact grain boundaries, implying that these are not critical parameters affecting crack nucleation at the grain boundary in duplex near-γ TiAl. The paper closes with a discussion on how combined microscopic and crystal plasticity finite element analyses provide insights on local stress-strain relationships that can be used to evaluate a fip in the context of heterogeneous deformation in multigrain ensembles.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Chemical Engineering and Materials Science, Michigan State University, East Lansing, MI 48824

Max-Planck-Institut für Eisenforschung, 40237 Düsseldorf, Germany

Mathematics and Computer Science, Albion College, Albion, MI 49224

References (50)

Show source-provided references
1. Gamma Titanium Aluminides-An Emerging Materials Technology
2. Intermetallics Alloys Based on Gamma Titanium Aluminide10.1007/BF03220267 ↗
3. The Deformation-Behavior of Intermetallic Superlattice Compounds
4. On Deformation Twins and Twin-Related Lamellae in TiAl10.1023/A:1004389428278 ↗
5. Biery · 557
6. Deformation Mechanisms of Near-Stoichiometric Single-Phase TiAl Single-Crystals and a Combined Experimental and Atomistic Modeling Study10.1016/0956-716X(95)00460-D ↗
7. Microstructural Evolution and Mechanical-Properties of a Forged Gamma-Titanium Aluminide Alloy10.1016/0956-7151(92)90411-7 ↗
8. Fatigue Deformation of TiAl Base Alloys10.1007/BF02661644 ↗
9. An In Situ Observation of Mechanical Twinning Nucleation and Propagation in TiAl10.1080/01418619408242933 ↗
10. A Numerical Force and Stress Analysis on a Thin Twin Layer in TiAl10.1080/01418619508236251 ↗
11. The Effect of Heat Treatments on Microstructures and Primary Creep Properties of Four Investment Cast Titanium Aluminides Alloys
12. A Factor to Predict Microcrack Nucleation at Gamma-Gamma Grain Boundaries in TiAl10.1016/S1359-6462(03)00216-1 ↗
13. Simkin, B. A. , 2003, Ph.D., thesis Michigan State University, Michigan.
14. The Effect of Grain Boundary Normal on Predicting Microcrack Nucleation Using Fracture Initiation Parameters in Duplex TiAl10.1016/j.msea.2006.06.046 ↗
15. Fracture Initiation/Propagation Parameters for Duplex TiAl Grain Boundaries Based on Twinning, Slip, Crystal Orientation, and Boundary Misorientation10.1016/j.intermet.2004.12.013 ↗
16. Crack Opening Due to Deformation Twin Shear at Grain Boundaries in Near-γ TiAl10.1016/j.intermet.2006.03.005 ↗
17. Orientation Determination and Defect Analysis in the Near-Cubic Intermetallic Gamma-TiAl Using SACP, ECCI, and EBSD10.1016/S0966-9795(02)00236-4 ↗
18. The Effect of Grain Boundary Misorientation, Inclination, Crystal Orientation, and Stress State on Microcrack Initiation in Duplex TiAl Grain Boundaries
19. Applications for Grain Boundary Engineered Materials10.1007/s11837-998-0248-z ↗
20. Grain Boundary Misorientation Effects on Creep and Cracking in Ni-Based Alloys10.1007/s11837-998-0249-y ↗
21. An Approach to Grain Boundary Design for Strong and Ductile Polycrystals
22. On the Influence of the Grain Boundary Misorientation on the Plastic Deformation of Aluminum Bicrystals10.1016/S1359-6454(03)00259-3 ↗
23. The Stress-Field of a Model Triple-Line Disclination10.1016/0921-5093(91)90436-Q ↗
24. The Influence of Grain Junctions and Boundaries on Superplastic Deformation.10.1016/0956-7151(94)00414-D ↗
25. Continuity of Slip Screw and Mixed-Crystal Dislocations Across Bicrystals of Nickel at 573-K10.1016/0001-6160(85)90057-4 ↗
26. Grain Boundary Hardening and Triple Junction Hardening in Polycrystalline Molybdenum10.1016/j.actamat.2004.11.002 ↗
27. Slip Transfer of Deformation Twins in Duplex Gamma-Based Ti-Al Alloys. III. Transfer Across General Large-Angle Gamma-Gamma Grain Boundaries
28. On the Criteria for Slip Transmission Across Interfaces in Polycrystals10.1016/0956-716X(92)90173-C ↗
29. Modeling Grain-Boundary Resistance in Intergranular Dislocation Slip Transmission10.1080/01418610210144421 ↗
30. Modeling of Dislocation-Grain Boundary Interactions in FCC Metals10.1016/j.jnucmat.2003.08.008 ↗
31. Compatibility of Deformation in Two-Phase Ti-Al Alloys: Dependence on Microstructure and Orientation Relationships10.1007/BF02670762 ↗
32. Dislocation Nucleation From Bicrystal Interfaces With Dissociated Structure10.1016/j.ijplas.2006.03.008 ↗
33. Bieler, T. R., Eisenlohr, P., Roters, F., Kumar, D., Mason, D. E., Crimp, M. A., and Raabe, D., “The Role of Heterogeneous Deformation on Damage Nucleation at Grain Boundaries in Single Phase Metals,” Int. J. Plast., in press.
34. Prediction of Grain-Boundary Interfacial Mechanisms in Polycrystalline Materials10.1115/1.1421611 ↗
35. Elastic Constants and Thermal Expansion of Single Crystal Gamma-TiAl From 300to750K10.1016/S0921-5093(97)00575-3 ↗
36. The Distribution of the Variance Ratio in Random Samples of Any Size Drawn From Non-Normal Universes10.1093/biomet/37.3-4.236 ↗
37. Beyond ANOVA: Basics of Applied Statistics10.2307/2533582 ↗
38. Kocks
39. Mykura
40. TexSEM Laboratories, Draper, UT.
41. Statistical Physics of Grain-Boundary Engineering10.1103/PhysRevE.71.026102 ↗
42. Measurements of Grain Boundary Mobility During Recrystallization of a Single-Phase Aluminium Alloy10.1016/S1359-6454(99)00062-2 ↗
43. Structure Growth and Properties of Twist and Tilt Grain Boundaries in Bicrystals of NaCl10.1063/1.1708668 ↗
44. An Energy Analysis of the Grain Boundary Behavior in Cleavage Cracking in Fe-3wt.%Si Alloy10.1016/j.matlet.2004.05.063 ↗
45. Crystallographic Texture Evolution in Bulk Deformation Processing of FCC Metals10.1016/0022-5096(92)80003-9 ↗
46. Large Deformation Simple Compression of a Copper Single Crystal10.1007/BF02656521 ↗
47. Evolution of Grain-Scale Microstructure During Large Strain Simple Compression of Polycrystalline Aluminum With Quasi-Columnar Grains: OIM Measurements and Numerical Simulations10.1016/S0749-6419(00)00072-3 ↗
48. Micromechanical and Macromechanical Effects in Grain Scale Polycrystal Plasticity Experimentation and Simulation10.1016/S1359-6454(01)00242-7 ↗
49. Experimental Investigation of Plastic Grain Interaction10.1016/S0921-5093(01)01974-8 ↗
50. Modeling and Measurement of the Notched Strength of Gamma Titanium Aluminides Under Monotonic Loading10.1007/s11661-999-0148-z ↗