Energy Criterion for Fatigue Strength of Wood Structural Members
Source abstract
Abstract
This report describes a mathematical model for fatigue strength of cellulosic materials under sinusoidal loading. The model is based on the Reiner-Weissenberg thermodynamic theory of strength in conjunction with a nonlinear Eyring’s three-element model. This theory states that failure depends on a maximum value of the intrinsic free energy that can be stored elastically in a volume element of the material. The three-element mechanical model, which consists of a linear spring in series with a parallel array of another linear spring and an Eyring dashpot, provides a good description of rheological material properties. The strength model system was able to predict rupture occurrence of polymers and wood structural members under constant and ramp loading with satisfactory results. For sinusoidal loading, the present study shows that the strength model system can predict time at fracture as a function of applied mean stress, amplitude of cyclic stress, and stress frequency. Numerical examples with model parameters evaluated for small Douglas-fir beams are presented.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Wood Treatment and Properties · Tree Root and Stability Studies · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
USDA Forest Service, Forest Products Laboratory, One Gifford Pinchot Drive, Madison, WI 53705-2398
References (21)
Show source-provided references
1. Bach L. , 1973, “Reiner-Weissenberg’s Theory Applied to Time-Dependent Fracture of Wood Subjected to Various Modes of Mechanical Loading,” Wood Science, Vol. 5, pp. 161–171.
2. Boey F. Y. C. , and TeohS. H., 1990, “Bending Creep Rupture Analysis Using a Nonlinear Energy Criterion Approach,” Material Science and Engineering, Vol. A123, pp. 13–19.10.1016/0921-5093(90)90204-G ↗
3. Cherry B. W. , and TeohS. H., 1983, “Energy Criterion for Modelling Creep Rupture of High-Density Polyethylene,” Polymer, Vol. 24, pp. 1067–1070.10.1016/0032-3861(83)90161-1 ↗
4. Coleman B. D. , 1956, “Application of the Theory of Absolute Reaction Rates to the Creep Failure of Polymeric Filaments,” Journal of Polymer Science, Vol. 20, pp. 447–455.10.1002/pol.1956.120209604 ↗
5. Coleman B. D. , and KnoxA. G., 1957, “The Interpretation of Creep Failure in Textile Fibres as a Rate Process,” Textile Research Journal, Vol. 5, pp. 393–399.10.1177/004051755702700509 ↗
6. Flu¨gge, W., 1967, Viscoelasticity, Blaisdell Publishing Co., London.
7. Fotheringham D. G. , and CherryB. W., 1978a, “Strain Rate Effects on the Ratio of Recoverable to Nonrecoverable Strain in Linear Polyethylene,” Journal of Materials Science, Vol. 13, pp. 231–238.10.1007/BF00647765 ↗
8. Fotheringham D. G. , and CherryB. W., 1978b, “The Role of Recovery Forces in the Deformation of Linear Polyethylene,” Journal of Materials Science, Vol. 13, pp. 951–964.10.1007/BF00544690 ↗
9. Fridley K. J. , TangR. C., and SoltisL. A., 1992, “Load-Duration Effects in Structural Lumber: Strain Energy Approach,” Journal of Structural Engineering, ASCE, Vol. 118, pp. 2351–2369.10.1061/(ASCE)0733-9445(1992)118:9(2351) ↗
10. Kohara M. , and OkuyamaT., 1992, “Mechanical Responses of Wood to Repeated Loading V.,” Mokuzai Gakkaishi, Vol. 38, pp. 752–758. (in Japanese).
11. Krausz, A. S., and Eyring, H., 1975, Deformation Kinetics, Wiley-Interscience, New York, NY.
12. Liu, J. Y., and Schaffer, E. L., 1995, “Energy Criterion for Load Duration Problem in Wood,” Proceedings, 10th Conference; Stein Sture, ed., Engineering mechanics: 1995 May 21–24; Boulder CO. New York: American Society of Civil Engineers, Vol. 2, pp. 1321–1327.
13. Liu J. Y. , ZahnJ. J., and SchafferE. L., 1994, “Reaction Rate Model for the Fatigue Strength of Wood,” Wood and Fiber Science, Vol. 26, pp. 3–10.
14. Morton, W. E., and Hearle, J. W. S., 1962, Physical Properties of Textile Fibres, The Textile Institute, Butterworths, London.
15. Reichardt C. H. , HalseyG., and EyringH., 1946, “Mechanical Properties of Textiles, X-Analysis of Steinberger’s Data on Creep of Cellulose Acetate Filaments,” Textile Research Journal, Vol. 16, pp. 382–389.10.1177/004051754601600804 ↗
16. Reiner, M., 1964, “A Thermodynamic Theory of Strength,” Rosen, B., ed., Fracture processes in Polymeric Solids-Phenomena and Theory, Wiley-Interscience, New York, NY.
17. Teoh S. H. , 1990, “Computation Aspects in Creep Rupture Modelling of Polypropylene Using an Energy Criterion in Conjunction With a Mechanical Model,” Polymer, Vol. 31, pp. 2260–2266.10.1016/0032-3861(90)90311-L ↗
18. Teoh S. H. , CherryB. W., and KauschH. H., 1992, “Creep Rupture Modelling of Polymers,” International Journal of Damage Mechanics, Vol. 1, pp. 245–256.10.1177/105678959200100205 ↗
19. Teoh S. H. , ChiaL. H. L., and BoeyF. Y. C., 1987, “Creep Rupture of a Tropical Wood Polymer Composite,” Radiation Physics and Chemistry, Vol. 29, pp. 201–207.10.1016/1359-0197(87)90117-2 ↗
20. Tobolsky A. , and EyringH., 1943, “Mechanical Properties of Polymeric Materials,” Journal of Chemical Physics, Vol. 11, pp. 125–134.10.1063/1.1723812 ↗
21. Wood, L. W., 1951, “Relation of Strength of Wood to Duration of Load,” Report No. 1916, USDA Forest Service, Forest Products Laboratory, Madison, WI.