journal article·2007-01-01

Characterization of Polypropylene Nanocomposite Structures

K. Kanny, V. K. Moodley

Publisher page

Abstract

This study describes the synthesis, mechanical properties, and morphology of nanophased polypropylene structures. The structures were manufactured by melt-blending low weight percentages of montmorillonite nanoclays and polypropylene thermoplastic. Both virgin and infused polypropylene structures were then subjected to quasi-static tensile, flexural, hardness and impact tests. Analysis of test data show that the mechanical properties increase with an increase in nanoclay loading up to a threshold of 2wt.%; thereafter, the material properties degrade. At low weight nanoclay loadings the enhancement of properties is attributed to the lower percolation points created by the high aspect ratio nanoclays. The increase in properties may also be attributed to the formation of intercalated and exfoliated nanocomposite structures formed at these loadings of clay. At higher weight loading, degradation in mechanical properties may be attributed to the formation of agglomerated clay tactoids. Results of transmission electron microscopy studies and scanning electron microscopy studies of the fractured surface of tensile specimens verify these hypotheses.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Durban Institute of Technology, 70 Mansfield Road, Durban, 4001, South Africa

References (21)

Show source-provided references
1. Mechanical Properties of Nylon-6 Clay Hybrids
2. Synthesis of Polypropylene Oligomer-Clay Intercalation Compounds10.1002/(SICI)1097-4628(19971128)66:9<1781::AID-APP17>3.0.CO;2-Y ↗
3. Preparation and Mechanical Properties of Polypropylene-Clay Hybrids10.1021/ma961786h ↗
4. Clay-Containing Polymeric Nanocomposites
5. Polymer-Layered Silicate Nanocomposites: Preparation, Properties and Uses of A New Class of Materials10.1016/S0927-796X(00)00012-7 ↗
6. Structure-Property Relationships in Cross-Linked Polyester-Clay Nanocomposites10.1016/S0032-3861(02)00187-8 ↗
7. New Advances in Polymer/Layered Silicate Nanocomposites10.1016/S1359-0286(02)00049-9 ↗
8. How Organo-Montmorillonite Truly Affects the Structure and Properties of Polypropylene
9. Synthesis and Characterization of Polypropylene/clay Nanocomposites10.1002/app.2223 ↗
10. A Direct-Blending Approach for Polypropylene/clay Nanocomposites Enhances Properties
11. Structure and Dynamics of Polymer-Layered Silicate Nanocomposites10.1021/cm960127g ↗
12. Pinnavaia
13. ASTM D 3039/D 3039M-93, 2004, “Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials,” ASTM Book of Standards, 08, Plastics (I): D256–D2343.
14. D790-03, 2004, “Standard Test Methods for Flexural Properties of Un-reinforced and Reinforced Plastics and Electrical Insulating Materials,” ASTM Book of Standards, 08.02, Plastics (II): D2383–D4322.
15. D256-02e1, 2004, “Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics,” ASTM Book of Standards, 08.01, Plastics (I): D256–D2343.
16. Effect of Maleic Anhydride-Grafted Ethylene–Propylene Rubber on the Mechanical, Rheological and Morphological Properties of Organoclay Reinforced Polyamide 6/Polypropylene Nanocomposites10.1016/j.eurpolymj.2004.10.041 ↗
17. Characterisation of Polymer-Layered Silicate (Clay) Nanocomposites by Transmission Electron Microscopy and X-Ray Diffraction: A Comparative Study
18. Analytical Approximation of the Two-Dimensional Percolation Threshold for Fields of Overlapping Ellipses10.1103/PhysRevE.66.066130 ↗
19. Polymer/Layered Silicate Nanocomposites: A Review From Preparation to Processing
20. Formation and Properties of Nylon 6 Nanocomposites10.1590/S0104-14282003000400004 ↗
21. Effect of Clay Orientation on the Tensile Modulus of Polypropylene-Nanoclay Composites10.1016/j.polymer.2004.06.027 ↗