journal article·1995-01-01

An Experimental Investigation of Damage Evolution in a Ceramic Matrix Composite

M. E. Walter, G. Ravichandran

Publisher page

Abstract

The mechanical behavior of a glass-ceramic matrix composite, SiC/CAS (calcium aluminosilicate reinforced with unidirectional SiC fibers), is studied. Results based on uniaxial tension experiments are presented for specimens with fibers aligned in the loading direction. Axial and transverse strain gages on all four gage section surfaces and in situ acoustic emission and ultrasonic wave speed measurements were used to monitor the evolution of damage. All measurements were made with high-resolution, continuous data acquisition. Post-test optical and scanning electron microscopy was also used to identify the various micromechanisms of damage. The experimental results demonstrate the existence of “zones of deformation” which are associated with the onset of different damage mechanisms. It is shown that the observed stress-strain behavior can be explained in terms of the material properties of the matrix and the fiber, the material processing, and the postulated zones of deformation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate Aeronautical Laboratories, California Institute of Technology, Pasadena, CA 91125

References (37)

Show source-provided references
1. Aveston, J., Cooper, G. A., and Kelly, A., 1971, “Single and Multiple Fracture,” The Properties of Fibre Composites, Guilford, UK, IPC Science and Technology Press, pp. 15–26.
2. Barsoum M. W. , KangutkarP., and WangA. S. D., 1992, “Matrix Crack Initiation in Ceramic Matrix Composites Part I: Experiments and Test Results,” Comp. Sci. Tech., Vol. 44, No. 9, pp. 257–269.10.1016/0266-3538(92)90016-V ↗
3. Beyerle D. S. , SpearingS. M., ZokF. W., and EvansA. G., 1992, “Damage and Failure in Unidirectional Ceramic-Matrix Composites,” J. Am. Ceram. Soc., Vol. 75, No. 10, pp. 2719–2725.10.1111/j.1151-2916.1992.tb05495.x ↗
4. Brennan J. J. , and PrewoK. M., 1982, “Silicon Carbide Fibre Reinforced Glass-Ceramic Matrix Composites Exhibiting High Strength and Toughness,” J. Mater. Sci., Vol. 17, No. 3, pp. 2371–2383.10.1007/BF00543747 ↗
5. Budiansky B. , HutchinsonJ. W., and EvansA. G., 1986, “Matrix Fracture in Fiber-Reinforced Ceramics,” J. Mech. Phys. Sol., Vol. 34, No. 2, pp. 167–189.10.1016/0022-5096(86)90035-9 ↗
6. Cho C. , HolmesJ. W., and BarberJ. R., 1992, “Distribution of Matrix Cracks in a Uniaxial Ceramic Composite,” J. Am. Ceram. Soc., Vol. 75, No. 2, pp. 316–324.10.1111/j.1151-2916.1992.tb08181.x ↗
7. Curtin W. A. , 1993, “Fiber Pull-Out and Strain Localization in Ceramic Matrix Composites,” J. Mech. Phys. Sol., Vol. 41, No. 1, pp. 35–53.10.1016/0022-5096(93)90062-K ↗
8. Daniel I. M. , AnastassopoulosG., and LeeJ-W., 1993, “The Behavior of Ceramic Matrix Fiber Composites under Longitudinal Loading,” Comp. Sci. Tech., Vol. 46, No. 4, pp. 105–113.10.1016/0266-3538(93)90166-E ↗
9. Dharani L. R. , and ReckerR. L., 1991, “Growth of Longitudinal Matrix Damage in Unidirectional Composites,” Eng. Fract. Mech., Vol. 38, No. 2–3, pp. 185–195.10.1016/0013-7944(91)90081-B ↗
10. Evans A. G. , 1990, “Perspective on the Development of High Toughness Ceramics,” J. Am. Ceram. Soc., Vol. 73, No. 2, pp. 187–206.10.1111/j.1151-2916.1990.tb06493.x ↗
11. Evans A. G. , and MarshallD. B., 1989, “The Mechanical Behavior of Ceramic Matrix Composites,” Acta Metall. Mater., Vol. 37, No. 10, pp. 2567–2583.10.1016/0001-6160(89)90291-5 ↗
12. Freund L. B. , 1992, “The Axial Force Needed to Slide a Circular Fiber Along a Hole in an Elastic-Material and Implications for Fiber Pull-out,” Eur. J. Mech. A/Sol., Vol. 11, No. 1, pp. 1–19.
13. Harris B. , HabibF. A., and CookeR. G., 1992, “Matrix Cracking and the Mechanical Behavior of SiC-CAS Composites,” Proc. Roy. Soc. Lond., Vol. 437, No. 7, pp. 109–131.10.1098/rspa.1992.0050 ↗
14. Hutchinson J. W. , and JensenH. M., 1990, “Models of Fiber Debonding and Pullout in Brittle Composites with Friction,” Mech. Mater., Vol. 9, pp. 139–163.10.1016/0167-6636(90)90037-G ↗
15. Kerans R. J. , HayR. S., PaganoN. J., and ParthasarathyT. A., 1989, “The Role of the Fiber-Matrix Interface in Ceramic Composites,” Am. Ceram. Soc. Bull., Vol. 68, No. 2, pp. 429–442.
16. Kerans R. J. , and ParthasarathyT. A., 1991, “Theoretical Analysis of the Fiber Pullout and Pushout Tests,” J. Am. Ceram. Soc., Vol. 74, No. 7, pp. 1585–1596.10.1111/j.1151-2916.1991.tb07144.x ↗
17. Kim R. Y. , and PaganoN. J., 1991, “Crack Initiation in Unidirectional Brittle-Matrix Composites,” J. Am. Ceram. Soc., Vol. 74, No. 5, pp. 1082–1090.10.1111/j.1151-2916.1991.tb04346.x ↗
18. Mah T. , MedirattaM. G., KatzA. P., RuhR., and MazdiyasniK. S., 1985, “Room-Temperature Mechanical Behavior of Fiber-Reinforced Ceramic-Matrix Composites,” J. Am. Ceram. Soc., Vol. 68, No. 1, pp. C27–C30C27–C30.10.1111/j.1151-2916.1985.tb15261.x ↗
19. Marshall D. B. , 1992, “Analysis of Fiber Debonding and Sliding Experiments in Brittle Matrix Composites,” Acta Metall. Mater., Vol. 40, No. 3, pp. 427–441.10.1016/0956-7151(92)90391-Q ↗
20. Marshall D. B. , CoxB. N., and EvansA. G., 1985, “The Mechanics of Matrix Cracking in Brittle-Matrix Fiber Composites,” Acta Metall. Mater., Vol. 33, No. 11, pp. 2013–2021.10.1016/0001-6160(85)90124-5 ↗
21. Marshall D. B. , and EvansA. G., 1985, “Failure Mechanisms in Ceramic-Fiber/Ceramic-Matrix Composites,” J. Am. Ceram. Soc., Vol. 68, No. 5, pp. 225–231.10.1111/j.1151-2916.1985.tb15313.x ↗
22. Marshall D. B. , and OliverW. C., 1987, “Measurement of Interfacial Mechanical Properties in Fiber-Reinforced Ceramic Composites,” J. Am. Ceram. Soc., Vol. 70, No. 8, pp. 542–548.10.1111/j.1151-2916.1987.tb05702.x ↗
23. Marshall D. B. , and RitterJ. E., 1987, “Reliability of Advanced Structural Ceramics and Ceramic Matrix Composites—A Review,” Am. Ceram. Soc. Bull., Vol. 66, No. 2, pp. 309–317.
24. McCartney L. N. , 1992, “Mechanics for the Growth of Bridged Cracks in Composite Materials: Part I. Basic Principles,” J. Comp. Tech. Res., Vol. 14, No. 3, pp. 133–147.10.1520/CTR10091J ↗
25. Nardone V. C. , and PrewoK. M., 1988, “Tensile Performance of Carbon-Fibre-Reinforced Glass,” J. Mater. Sci., Vol. 23, No. 12, pp. 168–180.10.1007/BF01174049 ↗
26. Pagano, N. J., 1992, Wright-Patterson AFB, Dayton, Ohio, Personal Communication.
27. Pagano N. J. , and BrownH. W., 1993, “The Full-Cracking Mode in Unidirectional Brittle-Matrix Composites,” Composites, Vol. 24, No. 2, pp. 69–83.10.1016/0010-4361(93)90002-P ↗
28. Pryce A. W. , and SmithP. A., 1992, “Behavior of Unidirectional and Crossply Ceramic Matrix Composites under Quasi-Static Tensile Loading,” J. Mater. Sci., Vol. 27, No. 3, pp. 2695–2704.10.1007/BF00540692 ↗
29. Rousseau C. Q. , DavidsonD. L., and CampbellJ. B., 1994, “The Micromechanics of Ambient Temperature Cyclic Fatigue Loading in a Composite of CAS Glass Ceramic Reinforced with Nicalon Fibers,” J. Comp. Tech. Res., Vol. 16, pp. 115–126.10.1520/CTR10401J ↗
30. So̸rensen, B. F., 1992, “Damage Mechanisms in Ceramic Matrix Fiber Composites,” Ph.D. thesis, The Technical University of Denmark.
31. So̸rensen B. F. , 1993, “Effect of Fibre Roughness on the Overall Stress-Transverse Strain Response of Ceramic Composites,” Scr. Met. Mat., Vol. 28, pp. 435–439.10.1016/0956-716X(93)90079-8 ↗
32. So̸rensen, B. F., Talreja, R., and So̸rensen, O. T., 1992, “Damage Development in a Ceramic Matrix Composite under Mechanical Loading,” Proc. 5th European Conf. on Comp. Mater., A. R. Bunsell, J. F. Jamet and A. Massiah, Eds., ECCM-5, Bordeaux, France, Apr. 7–10, pp. 129–139.
33. Spearing S. M. , ZokF. W., and EvansA. G., 1994, “Stress Corrosion Cracking in a Unidirectional Ceramic-Matrix Composite,” J. Am. Ceram. Soc., Vol. 77, No. 2, pp. 562–570.10.1111/j.1151-2916.1994.tb07030.x ↗
34. Stuart, R., 1992, Corning Inc., Corning, New York, Personal Communication.
35. Wang A. S. D. , HuangX. G., and BarsoumM. W., 1992, “Matrix Crack Initiation in Ceramic Matrix Composites Part II: Models and Simulation Results,” Comp. Sci. Tech., Vol. 44, No. 9, pp. 271–282.10.1016/0266-3538(92)90017-W ↗
36. Wang S-W. , and Parvizi-MajidiA., 1992, “Experimental Characterization of the Tensile Behavior of Nicalon Fibre-Reinforced Calcium Aluminosilicate Composites,” J. Mater. Sci., Vol. 27, No. 20, pp. 5483–5496.10.1007/BF00541610 ↗
37. Weihs T. P. , and NixW. D., 1991, “Experimental Examination of the Push-Down Technique for Measuring the Sliding Resistance of Silicon Carbide Fibers in a Ceramic Matrix,” J. Am. Ceram. Soc., Vol. 74, No. 3, pp. 542–534.10.1111/j.1151-2916.1991.tb04055.x ↗