Investigation of Failure Processes in Porous Battery Substrates: Part II—Simulation Results and Comparisons
Source abstract
Abstract
Models are presented for the evolution of transport and mechanical properties of nickel-metal hydride (NiMH) battery substrates. In the first paper in this series (Wang et al., 1999), conductive losses and enhancement of mechanical properties in these materials were quantified experimentally. These were qualitatively shown to be related to observed morphological changes in the substrate materials. Here, an evolution hypothesis for changes in these structures is presented, along with a simplified approximation of the real material microstructure (porous fiber/powder nickel network) with a tractable simulation geometry (porous fiber networks). Transport and mechanics models are then compared with experimental results, with stochastically-arranged fibers approximated as conductive beams connected by elastic torsion springs. Both quantitative and qualitative agreement are found with the models. Limitations of the approaches proposed are also discussed, along with the consequences of the simplifications of geometry for analysis.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Cellular and Composite Structures · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, and Applied Mechanics, The University of Michigan, Ann Arbor, MI 48109-2125
References (24)
Show source-provided references
1. Alzebdeh K. , and Ostoja-StarzewskiM., 1993, “Micromechanically Based Stochastic Finite Elements,” Finite Elements in Analysis and Design, Vol. 15, pp. 35–41.10.1016/0168-874X(93)90068-2 ↗
2. Balberg I. , and BinenbaumN., 1983, “Computer Study of the Percolation Threshold In A Two-Dimensional Anisotropic System of Conducting Sticks,” Physical Review B, Vol. 29, No. 7, pp. 3799–3812.10.1103/PhysRevB.28.3799 ↗
3. Borcea L. , and PapanicolaouG. C., 1997, “A Hybrid Numerical Method for High Contrast Conductivity Problems,” Journal of Computational and Applied Mathematics, Vol. 87, pp. 61–77.10.1016/S0377-0427(97)00175-1 ↗
4. Broadbent S. R. , and HammersleyJ. M., 1957, “Percolation Processes: Crystals and Mazes,” Proceedings of the Cambridge Philosophical Society, Vol. 53, pp. 642–645.10.1017/S0305004100032680 ↗
5. Cheng, X., Sastry, A. M., and Layton, B. E., 1999, “Transport in Stochastic Fibrous Networks,” in preparation, ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY.
6. Cheng, X., and Sastry, A. M., 1999, “On Transport In Stochastic, Heterogeneous Fibrous Domains,” to appear, Mechanics of Materials.10.1016/S0167-6636(99)00031-9 ↗
7. Cox H. L. , 1952, “The Elasticity and Strength of Paper And Other Fibrous Materials,” British Journal of Applied Physics, Vol. 3, pp. 72–79.10.1088/0508-3443/3/3/302 ↗
8. Kirkpatrick S. , 1973, “Percolation And Conduction,” Reviews of Modern Physics, Vol. 45, No. 4, pp. 574–588.10.1103/RevModPhys.45.574 ↗
9. Hearle J. W. S. , StevensonP. J., 1964, “Studies in Nonwoven Fabrics Part IV: Prediction of Tensile Properties,” Textiles Research Journal, Vol. 34, No. 3, pp. 181–191.10.1177/004051756403400301 ↗
10. Lu W. T. , CarlssonL. A., and AnderssonY., 1995, “Micro-model of Paper, Part 1: Bounds on Elastic Properties,” Tappi Journal, Vol. 78, No. 12, pp. 155–164.
11. Lu W. T. , and CarlssonL. A., 1996, “Micro-model of Paper, Part 2: Statistical Analysis of the Paper Structure,” Tappi Journal, Vol. 79, No. 1, pp. 203–210.
12. Lu W. T. , and CarlssonL. A., 1996, “Micro-model of Paper, Part 3: Mosaic Model,” Tappi Journal, Vol. 79, No. 2, pp. 197–205.
13. McLachlan D. S. , 1988, “Measurement And Analysis Of A Model Dual-conductivity Medium Using A Generalized Effective-medium Theory,” Journal of Physics C: Solid State Physics, Vol. 21, pp. 1521–1522.10.1088/0022-3719/21/8/025 ↗
14. Pike G. E. , and SeagerC. H., 1974, “Percolation and Conductivity: A Computer Study. I*,” Physical Review B, Vol. 10, No. 4, pp. 1421–1434.10.1103/PhysRevB.10.1421 ↗
15. Oshitani M. , TakayamaT., TakashimaK., and TsujiS., 1986, “A Study on the Swelling of Sintered Nickel Hydroxide Electrode,” Journal of Applied Electrochemistry, Vol. 16, pp. 403–412.10.1007/BF01008851 ↗
16. Ostoja-Starzewski M. , and WangC., 1989, “Linear Elasticity of Planar Delaunary Networks: Random Field Characterization of Effective Moduli,” Acta Mechanica, Vol. 80, pp. 61–80.10.1007/BF01178180 ↗
17. Ostoja-Starzewski M. , and WangC., 1990, “Linear Elasticity of Planar Delaunary Networks. Part II: Voigt And Reuss Bounds, And Modification For Centroids,” Acta Mechanica, Vol. 84, pp. 47–61.10.1007/BF01176087 ↗
18. Sastry, A. M., 1994, “Modeling Conductivity of Composite Substrates for Nickel-Metal Hydride Batteries,” Sandia Report SAND94–2884.
19. Sastry A. M. , ChengX., and WangC. W., 1998a, “Mechanics Of Stochastic Fibrous Network,” Journal of Thermoplastic Composite Materials, Vol. 11, pp. 288–296.10.1177/089270579801100307 ↗
20. Sastry A. M. , ChengX., and ChoiS. B., 1998b, “Damage in Composite NiMH Positive Electrodes,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 120, pp. 280–283.10.1115/1.2807013 ↗
21. Seager C. H. , and PikeG. E., 1974, “Percolation And Conductivity: A Computer Study, II*,” Physical Review B, Vol. 10, No. 4, pp. 1435–1446.10.1103/PhysRevB.10.1435 ↗
22. USABC, 1996, “USABC Electric Vehicle Battery Test Procedures Manual, Revision 2,” principal author: Gary Hunt, Idaho National Engineering Laboratory (INEL), U.S. Department of Energy Idaho Field Office, DOE/ID–10479, Rev. 2.
23. Wang, C. W., Cheng, X., Sastry, A. M., and Choi, S. B., 1999, “Investigation of Failure Processes in Porous Battery Substrates: Part l—Experimental Findings,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, published in this issue pp.10.1115/1.2812408 ↗
24. Wang, C. W., Sastry, A. M., 1999, “Structure, Mechanics and Failure of Stochastic Fibrous Networks,” manuscript in preparation.