Effect of Stress Frequency on Fatigue Crack Propagation in Titanium
Source abstract
Abstract
The effect of stress frequency on the fatigue crack propagation rate in 99.5 percent pure titanium, which has a strong strain rate dependency in the plastic region, was studied. Fatigue crack propagation tests were carried out under three stress frequencies (0.02Hz, 0.2Hz, 20Hz). An elasto/visco-plastic analysis of fatigue crack propagation was performed by the finite element method (FEM), and an analysis of the dependency of crack propagation rate on frequency and strain behavior at the crack tip. The results obtained in this study are summarized as follows: (1) It was found from the experiments that the crack propagation rate, dl/dN, was approximately in inverse proportion to fn (n>0), where f is the frequency. (2) A parameter closely related to the fatigue crack growth rate is the strain range, Δεy, or visco-plastic strain range, Δεyνp at the crack tip. (3) The effect of stress frequency on the fatigue crack propagation rate may be explained by variations of Δεy or Δεyνp based on the strain rate dependency of the material.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Fatigue and fracture mechanics · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Kumamoto University, Kurokami, Kumamoto 860, Japan
References
Reference metadata was not supplied for this record.