journal article·2007-04-01

On Serrated Plastic Flow in an AA5052-H32 Sheet

Wei Tong, Nian Zhang

Publisher page

Abstract

Abstract Temporal and spatial characteristics of serrated plastic flow or the so-called Portevin-Le Chatelier (PLC) deformation bands in a commercial Al-2.5%Mg sheet metal due to dynamic strain aging effects were investigated experimentally under quasi-static uniaxial tension. It was found that the thickness and width of test coupons, applied loading conditions (machine stiffness and crosshead speed), and mechanical polishing had an observable effect on the temporal characteristics of the serrated plastic flow while short and long interruptions during the tensile tests with stress relaxation and even completely unloading show minimal effects on the subsequent serrated flow behavior. Serrations in axial load in AA5052-H32 were found to associate with the appearance of discrete narrow deformation bands in the tensile test coupons with the bands aligned 59±1deg with respect to the tensile loading axis. The detailed strain distribution across the deformation bands showed a bell-like instead of steplike shape, indicating that the formation of these deformation bands was controlled by a local nucleation and growth process at a cross section in the polycrystalline sheet.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Yale University, New Haven, CT 06520-8284

References (25)

Show source-provided references
3. Serrated Flow in Aluminum Base Alloys10.1179/imr.1994.39.6.217 ↗
4. Collective Behavior of Dislocations in Plasticity
5. Computer-Assisted Recording of Tensile Tests for the Evaluation of Serrated Flow10.1016/0956-716X(94)90075-2 ↗
6. Stress-Drop Rates in Serrated Flow of Aluminum Alloys10.1016/S1359-6462(97)00571-X ↗
7. Time Distribution of Stress Drops, Critical Strain and Crossover in the Dynamics of Jerky Flow10.1016/S0921-5093(03)00141-2 ↗
8. Detection of Plastic Deformation Patterns in a Binary Aluminum Alloy10.1007/BF02317313 ↗
9. Strain Characterization of Propagative Deformation Bands10.1016/S0022-5096(98)00058-1 ↗
10. Error Assessment for Strain Mapping by Digital Image Correlation10.1111/j.1747-1567.1998.tb02332.x ↗
11. Evaluation of Two Plastic Strain Mapping Methods
12. Li, X. , 2001, “Spatial Characterization and Modeling of Unstable Plastic Flow Patterns in Two Aluminum Alloys,” Ph.D. thesis, Yale University, New Haven.
13. Effects of Composition, Processing and Structure on Aluminum Alloys
14. The Kinectics of the Portevin-Le Chatelier Bands in an Al-5at.%Mg Alloy10.1016/0036-9748(87)90435-2 ↗
15. Kinetics of the Portevin-Le Chatelier Effect in Al6061 Alloy10.1016/0001-6160(85)90148-8 ↗
16. A New Rate-Type Gradient-Dependent Viscoplastic Approach for Stop-and-Go Strain Band Propagation: Numerical vs. Physical Experiments
17. Spatio-Temporal Dynamics of the Portevin-Le Chatelier Effect: Experiment and Modeling10.1016/S1359-6454(00)00067-7 ↗
18. An Investigation of Serrated Yielding in 5000 Series in Aluminum Alloys10.1016/S0921-5093(03)00017-0 ↗
19. Time-Resolved Strain Mapping Measurements of Individual Portevin-Le Chatelier Deformation Bands10.1016/j.scriptamat.2005.03.020 ↗
20. Observation and Modeling of Propagating Portevin-Le Chatelier Deformation Bands in Cu-15at.%Al polycrystals10.1080/01418610010008497 ↗
21. Analysis of Portevin-Le Chatelier Serrations of Type B in Al-Mg10.1016/j.msea.2003.10.292 ↗
22. Plastic Instabilities With Propagation Deformation Bands in Cu-Al alloys10.1080/14786430310001610320 ↗
23. On the Portevin-Le Chatelier Effect: Theoretical Modeling and Numerical Results10.1016/S0749-6419(03)00035-4 ↗
24. Dynamical Approach to the Spatiotemporal Aspects of the Portevin-Le Chatelier Effect: Chaos, Turbulence, and Band Propagation10.1103/PhysRevE.70.026111 ↗
25. Hill · 324