journal article·2010-01-01

Dual-Axis Hole-Drilling ESPI Residual Stress Measurements

Gary S. Schajer, Michael Steinzig

Publisher page

Abstract

A novel dual-axis ESPI hole-drilling residual stress measurement method is presented. The method enables the evaluation of all the in-plane normal stress components with similar response to measurement errors, significantly lower than with single-axis measurements. A numerical method is described that takes advantage of, and compactly handles, the additional optical data that are available from the second measurement axis. Experimental tests were conducted on a calibrated specimen to demonstrate the proposed method, and the results supported theoretical expectations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Surface Polishing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Fellow ASME

Department of Mechanical Engineering, University of British Columbia, Vancouver, BC, V6T 1Z4, Canada

Mem. ASME

Los Alamos National Laboratory, Los Alamos, NM 87544-1663

References (17)

Show source-provided references
1. Osgood
3. ASTM, 2008, “Determining Residual Stresses by the Hole-Drilling Strain-Gage Method,” ASTM Standard Test Method E837-08, American Society for Testing and Materials, West Conshohocken, PA.
4. Hole-Drilling and Ring Core Methods
5. Vishay Measurements Group, Inc., 1993, “Measurement of Residual Stresses by the Hole-Drilling Strain-Gage Method,” Technical Paper No. TN-503-6.
6. Residual-Stress Determination Through Combined Use of Holographic Interferometry and Blind-Hole Drilling10.1007/BF02320153 ↗
7. Inversion of Speckle Interferometer Fringes for Hole-Drilling Residual Stress Determinations10.1007/BF02325038 ↗
8. Residual Stress Measurement Using the Hole Drilling Method and Laser Speckle Interferometry—Part I10.1111/j.1747-1567.2003.tb00114.x ↗
9. Determination of Residual Stresses by an Optical Correlative Hole Drilling Method10.1007/BF02410490 ↗
11. Sirohi
12. Schajer, G. S. , 2009, “Advances in Hole-Drilling Residual Stress Measurements,” Exp. Mech.0014-4851, in press.10.1115/1.3184035 ↗
13. Residual Stress Measurement Using the Hole Drilling Method and Laser Speckle Interferometry—Part II10.1111/j.1747-1567.2003.tb00117.x ↗
14. Ghiglia
15. Use of Inverse Solutions for Residual Stress Measurements10.1115/1.2204952 ↗
16. Application of Finite Element Calculations to Residual Stress Measurements10.1115/1.3224988 ↗
17. Stress Calculation Error Analysis for Incremental Hole Drilling Residual Stress Measurements10.1115/1.2805924 ↗