Fatigue Crack Identification in Tensile-Shear Spot Welded Joints by Dynamic Response Characteristics
Source abstract
Abstract
A theoretical model for the estimation of fatigue crack length of tensile-shear spot welded specimen is developed which incorporates the natural frequency and mode variation. The model is based on the concept that the propagation of cracks causes a release of strain energy, which is related to the structural modal shape. The effect of the structural mode shape and crack location is also explained. The model, experimental, and finite element results indicate that the existence of cracks cause the reduction of natural frequencies and change of natural modes, and that the mode shape of the structure and crack location will affect the magnitude of the change of these dynamic variables. The predictions of the model are compared with the experimental data and finite element analysis results and agreement is found to be consistent.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Health Monitoring Techniques · Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The Department of Aerospace Engineering and Mechanics, University of Alabama, Box 870280, Tuscaloosa, AL 35487-0280
References (28)
Show source-provided references
1. Fatigue life estimation of spot welded joints using an interpolation/extrapolation technique10.1016/S0142-1123(99)00043-2 ↗
2. Failure modes of single resistance spot welded joints subjected to combined fatigue loading10.1504/IJMPT.2001.001278 ↗
3. Evaluation of multiaxial spot weld fatigue parameters for proportional loading10.1016/S0142-1123(00)00037-2 ↗
4. Stress intensities derived from stresses around a spot weld10.1023/A:1018608615567 ↗
5. Estimation of fatigue propagation life in resistance spot welds
6. Static and Dynamic Characteristics of Spot Welded Sheet Metal Beams
7. An Approach for Evaluating Power Transfer Coefficients for Spot-Welded Joint in an Energy Finite Element Formulation10.1006/jsvi.1998.1942 ↗
8. Vibration Characteristics of Welded Beam and Plate Structures10.3397/1.2839669 ↗
9. Wang, Y., and Lim, T. C., 2001, “An Experimental and Computational Study of the Dynamic Characteristics of Spot-Welded Sheet Metal Structures,” SAE Technical Report, No.2001-01-0431, Detroit, Michigan.10.4271/2001-01-0431 ↗
10. Shang, De-Guang, Barkey, M. E., Wang, Y., and Lim, T. C., 2003, “Fatigue damage and dynamic natural frequency response of spot-welded joints,” SAE, MI, No.2003-01-0695.10.4271/2003-01-0695 ↗
11. Effect of Fatigue damage on dynamic response frequency of spot-welded joints10.1016/S0142-1123(02)00140-8 ↗
12. Experimental investigation of fatigue crack and its influence on dynamic response characteristic of spot welded specimen10.1177/0014485104047383 ↗
13. One-dimensional theory of cracked Bernoulli–Euler beams10.1016/0020-7403(84)90017-1 ↗
14. Vibration analysis of edge-cracked beams using a line-spring model10.1016/S0013-7944(97)80283-4 ↗
15. Eigenfrequency changes of structures due to cracks, notches or other geometrical changes10.1016/0022-5096(82)90004-7 ↗
16. Analysis of the effect of cracks on the natural frequencies of a cantilever beam10.1016/0022-460X(91)90615-Q ↗
17. Effect of partial depth cracks on the natural frequency of twisted blades: A 3D finite element analysis10.1006/jsvi.1997.0991 ↗
18. Natural modes of Bernoulli–Euler Beams with symmetric cracks10.1016/0022-460X(90)90707-7 ↗
19. Vibration of cracked structures: A state of the art review10.1016/0013-7944(94)00175-8 ↗
20. A survey of the dynamic behavior of a simple rotating shaft with a transverse crack10.1006/jsvi.1993.1026 ↗
21. Identification of fatigue cracks from vibration testing10.1016/0022-460X(90)90530-D ↗
22. Crack detection by resonant frequency measurements
23. Crack detection in beams using changes in frequencies and amplitudes of frequency response functions10.1016/S0022-460X(02)01264-6 ↗
24. Damage identification in beam-type structures: Frequency-based method vs. mode-shape-based method10.1016/S0141-0296(02)00118-9 ↗
25. Blevins10.1115/1.3153712 ↗
26. Tada
27. Anderson
28. The measurement of fatigue cracks at spot welds10.1016/0142-1123(85)90023-4 ↗