journal article·2006-10-01

Localization, Delocalization, and Compression Fracture in Moderately Thick Transversely Isotropic Bilinear Rings Under External Pressure

Reaz A. Chaudhuri

Publisher page

Abstract

A fully nonlinear finite element analysis for prediction of localization∕delocalization and compression fracture of moderately thick imperfect transversely isotropic rings, under applied hydrostatic pressure, is presented. The combined effects of modal imperfections, transverse shear∕normal deformation, geometric nonlinearity, and bilinear elastic (a special case of hypoelastic) material property on the emergence of interlaminar shear crippling type instability modes are investigated in detail. An analogy to a soliton (slightly disturbed integrable Hamiltonian system) helps understanding the localization (onset of deformation softening) and delocalization (onset of deformation hardening) phenomena leading to the compression damage∕fracture at the propagation pressure. The primary accomplishment is the (hitherto unavailable) computation of the mode II fracture toughness (stress intensity factor∕energy release rate) and shear damage∕crack bandwidth, under compression, from a nonlinear finite element analysis, using Maxwell’s construction and Griffith’s energy balance approach. Additionally, the shear crippling angle is determined using an analysis, pertaining to the elastic plane strain inextensional deformation of the compressed ring. Finally, the present investigation bridges a gap of three or more orders of magnitude between the macro-mechanics (in the scale of mms and up) and micro-mechanics (in the scale of microns) by taking into account the effects of material and geometric nonlinearities and combining them with the concepts of phase transition via Maxwell construction and Griffith-Irwin fracture mechanics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Elasticity and Material Modeling · Numerical methods in engineering · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Member ASME

Department of Materials Science & Engineering, University of Utah, Salt Lake City, UT 84112-0560

References (27)

Show source-provided references
1. Couch, W. P., Ward, G. D., and Blumenberg, W. F., 1969, “Investigation of Filament-Reinforced Plastic Deep Submergence Pressure Hulls—July 1966 to March 1969,” Department of the Navy, Naval Ship Research & Development Center, Washington, DC.
2. Garala, H. J. , 1989, “Structural Evaluation of 8-Inch Diameter Graphite-Epoxy Composite Cylinders Subjected to External Hydrostatic Compressive Loading,” Naval Surface Warfare Center (NSWC) Report, DTRC-89∕016, Carderock, MD.
3. Structural Evaluation of Advanced Composite Thick-Section Cylinders Under Biaxial Compression
4. Measurement of Deformation in Thick Composite Rings Subjected to External Pressure
5. Prediction of the Compressive Strength of Thick-Section Advanced Composite Laminates10.1177/002199839102501001 ↗
6. Localization and Shear-Crippling Instability in a Thick Imperfect Laminated Composite Ring Under Hydrostatic Pressure10.1016/S0020-7683(03)00355-X ↗
7. Stress Singularity Due to Kink Band Weakening a Unidirectional Composite Under Compression10.1177/002199839603000603 ↗
8. Analytical∕Experimental Evaluation of Hybrid Commingled Carbon∕Glass∕Epoxy Thick-Section Composites Under Compression10.1177/002199839502901302 ↗
9. On Propagation of Shear Crippling (Kink Band) Instability in a Long Thick Laminated Composite Imperfect Cylindrical Shell Under External Pressure10.1016/S0020-7683(96)00084-4 ↗
10. Influence of Localized Imperfection on the Instability of Isotropic∕Cross-Ply Cylindrical Shells∕Rings Under External Pressure10.1016/j.compstruct.2004.01.003 ↗
11. Localized Buckling of a Bilinear Elastic Ring Under External Pressure10.1061/(ASCE)0733-9399(2005)131:2(221) ↗
12. Kim, D. J., and Chaudhuri, R. A., “Postbuckling of Moderately Thick Imperfect Rings Under External Pressure,” J. Eng. Mech. (in press).
13. Geometrically Nonlinear Analysis of a Cylindrical Shell Using Surface-Parallel Quadratic Elements10.1016/0045-7949(96)00119-8 ↗
14. Full and von Karman Geometrically Nonlinear Analyses of Laminated Cylindrical Panels10.2514/3.12963 ↗
15. Effect of Thickness on the Large Elastic Deformation Behavior of Laminated Shells
16. Effect of Thickness on the Large Deflection Behavior of Laminated Shells10.2514/2.729 ↗
17. Halpin
19. Buckling of Thick Orthotropic Cylindrical Shells Under External Pressure10.1115/1.2900745 ↗
20. Fermi, E., Pasta, J., and Ulam, S. M., 1953, “Studies in Nonlinear Problems,” Tech. Rept. LA-1940, Los Alamos Sci. Lab.
21. The Origins of Computer Simulation: The Real Scientific Hero of 1953
22. Berdichevsky
23. Interaction of Solitons in a Collisionless Plasma and the Recurrence of Initial States10.1103/PhysRevLett.15.240 ↗
24. Pathria
25. Anderson
26. Hertzberg
27. Transverse Compressive Behavior of Unidirectional Carbon Fiber Reinforced Plastics10.1016/0010-4361(74)90548-5 ↗