journal article·1998-04-01

A Simulation Procedure for Panel Age Forming

S. P. Narimetla, J. Peddieson, G. R. Buchanan, S. Foroudastan

Publisher page

Abstract

A method of simulating the age forming of initially flat panels is proposed. It conceptually divides the process into three phases (loading, aging, and unloading) and simulates each phase separately. Some sample simulations are presented for 7075 aluminum alloy based on a simplified version of the general procedure (linear loading and unloading, nonlinear aging). The results of these simulations are used to illustrate several aspects of the predictions. An interesting finding is that the part shape and tool shape are geometrically similar in two important special cases.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Laser and Thermal Forming Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Center for Manufacturing Research, Tennessee Technological University, Cookeville, TN 38505

Department of Mechanical Engineering, Tennessee Technological University, Cookeville, TN 38505

Department of Civil Engineering, Tennessee Technological University, Cookeville, TN 38505

Textron Aerostructures, Nashville, TN 37202

References (25)

Show source-provided references
1. Bodner S. R. , and PartomY., 1975, “Constitutive Equations for Elastic-Viscoplastic Strain-Hardening Materials,” ASME Journal of Applied Mechanics, Vol. 42, pp. 385–389.10.1115/1.3423586 ↗
2. Bodner S. R. , and MerzerA., 1978, “Viscoplastic Constitutive Equations for Copper with Strain Rate History and Temperature Effects,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 100, pp. 388–394.10.1115/1.3443509 ↗
3. Cook, R. D., Malkus, D. S., and Plesha, M. E., 1989, Concepts and Applications of Finite Element Analysis, Wiley, New York.
4. Freed A. D. , and WalkerK. P., 1990, “Steady-State and Transient Zener Parameters in Viscoplasticity: Drag Strength Versus Yield Strength,” Applied Mechanics Reviews, Vol. 43, pp. S328–S337S328–S337.10.1115/1.3120836 ↗
5. Freed A. D. , and WalkerK. P., 1995, “Viscoplastic Model Development with an Eye Toward Characterization,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 117, pp. 8–13.10.1115/1.2804377 ↗
6. Foroudastan S. , PeddiesonJ., and HolmanM. C., 1992, “Application of a Unified Viscoplastic Model to Simulation of Autoclave Age Forming,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 114, pp. 71–76.10.1115/1.2904143 ↗
7. Gardiner F. J. , 1957, “The Spring Back of Metals,” Trans. ASME, Vol. 79, pp. 1–9.10.1115/1.4012908 ↗
8. Hart E. W. , 1976, “Constitutive Relations for the Nonelastic Deformation of Metals,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 98, pp. 193–202.10.1115/1.3443368 ↗
9. Holman M. C. , 1989, “Autoclave Age Forming Large Aluminum Aircraft Panels,” Journal of Mechanical Working Technology, Vol. 20, pp. 477–488.10.1016/0378-3804(89)90055-7 ↗
10. Hughes T. J. R. , and CohenM., 1978, “The Heterosis Finite Element for Plate Bending,” Computers and Structures, Vol. 9, pp. 445–450.10.1016/0045-7949(78)90041-X ↗
11. James G. H. , ImbrieP. K., HillP. S., AllenD. H., and HaislerW. E., 1987, “An Experimental Comparison of Several Current Viscoplastic Constitutive Models at Elevated Temperatures,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 109, pp. 130–139.10.1115/1.3225952 ↗
12. Johnson W. , and YuT. X., 1981a, “Springback After the Biaxial Elastic-Plastic Pure Bending of a Rectangular Plate-I,” International Journal of Mechanical Sciences, Vol. 23, pp. 619–630.10.1016/0020-7403(81)90042-4 ↗
13. Johnson W. , and YuT. X., 1981b, “On Springback After the Pure Bending of Beams and Plates of Elastic Work-Hardening Materials-III,” International Journal of Mechanical Sciences, Vol. 23, pp. 687–695.10.1016/0020-7403(81)90022-9 ↗
14. Karafilis A. P. , and BoyceM. C., 1992, “Tooling Design in Sheet Metal Forming Using Springback Calculations,” International Journal of Mechanical Sciences, Vol. 34, pp. 113–131.10.1016/0020-7403(92)90077-T ↗
15. Miller A. K. , 1976a, “An Inelastic Constitutive Model for Monotonic, Cyclic, and Creep Deformations, Part I,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 98, pp. 97–105.10.1115/1.3443367 ↗
16. Miller A. K. , 1976b, “An Inelastic Constitutive Model for Monotonic, Cyclic, and Creep Deformations, Part II,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 98, pp. 106–113.10.1115/1.3443346 ↗
17. Miller A. K. , 1980, “Modelling of Cyclic Plasticity With Unified Constitutive Equations: Improvements in Simulating Normal and Anomalous Bauschinger Effects,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 102, pp. 215–222.10.1115/1.3224800 ↗
18. Miller A. K. , and ShihC. F., 1977, “An Improved Method for Numerical Integration of Constitutive Equations of the Work Hardening Recovery Type,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 99, pp. 275–277.10.1115/1.3443531 ↗
19. Miller A. K. , and SherbyO. D., 1978, “A Simplified Phenomenological Model for Non-Elastic Deformation: Predictions of Pure Aluminum Behavior and Incorporation of Solute Strengthening Effects,” Acta Metallurgica, Vol. 26, pp. 289–304.10.1016/0001-6160(78)90129-3 ↗
20. Peddieson J. , and BuchananG. R., 1990, “Mathematical Modeling of an Age-Forming Process,” Mathematical and Computer Modeling, Vol. 14, pp. 1057–1060.10.1016/0895-7177(90)90338-N ↗
21. Sallah M. , PeddiesonJ., and ForoudastanS., 1991, “A Mathematical Model of Autoclave Age Forming,” Journal of Materials Processing Technology, Vol. 28, pp. 211–219.10.1016/0924-0136(91)90031-9 ↗
22. Senseny P. E. , BrodskyN. S., and DeVriesK. L., 1993, “Parameter Evaluation for a Unified Constitutive Model,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 115, pp. 157–162.10.1115/1.2904201 ↗
23. Senseny P. E. , and FossumA. F., 1995, “On Testing Requirements for Viscoplastic Constitutive Parameter Estimation,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 117, pp. 151–156.10.1115/1.2804522 ↗
24. Stouffer D. C. , and BodnerS. R., 1979, “A Constitutive Model for the Deformation Induced Anisotropic Plastic Flow of Metals,” International Journal of Engineering Science, Vol. 17, pp. 757–764.10.1016/0020-7225(79)90050-8 ↗
25. Walker, K. P., and Wilson, D. A., 1983, “Constitutive Modeling for Engine Materials,” United Technologies Pratt and Whitney Report FR-17911.