journal article·2001-04-01

Experiments and Numerical Simulations on Thin Metallic Plates Subjected to an Explosion

Krzysztof Woznica, Olivier Pennetier, Je´ro^me Renard

Publisher page

Abstract

Submitted to a sudden and a transient loading, a metallic structure quickly evolves toward viscoplastic behavior, including high strain rates. After generalities about the specific loading and the description of the experimental setup, a numerical simulation based on the F.E.M. using an explicit scheme is presented. Three different constitutive laws are discussed: the Perzyna, the Bodner-Partom, and that of Chaboche. The identification of constitutive parameters is made using unidirectional tests on the studied material (aluminum alloy 5754). A comparison between numerical simulations and experiments shows that the method is relevant.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universite´ des Sciences et Technologies de Lille, EUDIL, Laboratoire de Me´canique de Lille, URA CNRS 1441 59665 Villeneuve D’ASCQ cedex, France

Laboratoire Energe´tique-Explosions-Structures, Universite´ d’Orle´ans, EA 1205, 63 Av. de Lattre de Tassigny, 18020 Bourges cedex, France

References (28)

Show source-provided references
1. Florence, A. L. , 1966, “Circular plate under a uniformly distributed impulse,” Int. J. Solids Struct., 2, pp. 37–47.10.1016/0020-7683(66)90005-9 ↗
2. Batra, R. C., and Dubey, R. N., 1971, “Impulsively loaded circular plates,” Int. J. Solids Struct., 7, pp. 965–978.10.1016/0020-7683(71)90075-8 ↗
3. Wierzbicki, T., and Andrzejewski, H., 1972, “Impulsive loading of viscoplastic cylindrical shells,” Proc. Symp. Plastic Analysis of Struct. Iassy, Sept., pp. 461–479.
4. Sperling, A., and Partom, Y., 1977, “Numerical analysis of large elastic-plastic deformation of beam due to dynamic loading,” Int. J. Solids Struct., 12, pp. 865–876.10.1016/0020-7683(77)90001-4 ↗
5. Wierzbicki, T., and Florence, A. L., 1977, “A theoretical and experimental investigation of impulsively loaded clamped circular viscoplastic plates,” Int. J. Solids Struct., 13, pp. 865–876.
6. Kolsky, H., Rush, P., and Symonds, P. S., 1991, “Some experimental observations of anomalous response of fully clamped beams,” Int. J. Impact Eng., 11, No. 4, pp. 445–456.10.1016/0734-743X(91)90012-5 ↗
7. Symonds, P. S., and Jones, N., 1972, “Impulsive loading of fully clamped beams with finite plastic deflections and strain-rate sensitivity,” Int. J. Mech. Sci., 14, pp. 49–59.10.1016/0020-7403(72)90006-9 ↗
8. Witmer, E. A., Balmer, H. A., Leech, J. W., and Pian, T. H. H., 1963, “Large dynamic deformations of beams, rings, plates, and shells,” AIAA J., 1, No. 8, pp. 1848–1858.10.2514/3.1934 ↗
9. Bodner, S. R., and Symonds, P. S., 1979, “Experiments on viscoplastic response of circular plates to impulsive loading,” J. Mech. Phys. Solids, 27, pp. 91–113.10.1016/0022-5096(79)90013-9 ↗
10. Idczak, W., Rymarz, CZ., and Spychala, A., 1981, “Studies on shock-wave loaded, clamped circular plates,” J. Tech. Phys., 22, No. 2, pp. 175–184.
11. Renard, J., and Pennetier, O., 1996, “Nonlinear dynamic response of plates submitted to an explosion-numerical and experimental study,” Proc. Eurodyn 96, ed. Balkema, pp. 689–694.
12. Pennetier, O., and Renard, J., 1997, “Nouvelle me´thode expe´rimentale d’e´tude du comportement dynamique a` grande vitesse de de´formation des plaques minces-sollicitation par explosion,” J. Phys. IV, 7, pp. 131–136.10.1051/jp4:1997325 ↗
13. Lannoy, A., 1984, “Analyse des explosions air-hydrocarbures en milieu libre: Etudes de´terministe et probabiliste du sce´nario d’accident. Pre´vision des effets de surpression,” Bulletin D.E.R. EDF, A4.
14. Delaroche, C., 1983, “Caracte´risation d’une onde due a` la de´tonation d’un me´lange gazeux air-hydrocarbure en milieu libre,” D.E.R. EDF, Rapport HP/219/83/48.
15. Brossard, J., Desrosier, C., Purnomo, H., and Renard, J., 1993, “Pressure Loads on Plane Surface submitted to an Explosion,” 19th Int. Symp. on Shock Waves, Marseille, Vol. 4, pp. 387–392.10.1007/978-3-642-79532-9_64 ↗
16. Woznica, K., 1998, “Dynamique des structures e´lasto-viscoplastiques,” Cahiers de Me´canique 1-2/98, Universite´ des Sciences et Technologies de Lille.
17. Klosowski, P., Woznica, K., and Weichert, D., 1995, “Dynamics of elasto-viscoplastic plates and shells,” Arch. Appl. Mech., 65, pp. 326–345.10.1007/BF00789224 ↗
18. Woznica, K., and Klosowski, P., 1997, “Constitutive laws of viscoplasticity in dynamic response of structures,” Eng. Trans., 45, No. 1, pp. 153–168.
19. Perzyna, P. , 1966, “Fundamental problems of viscoplasticity,” Adv. Mech., 9, pp. 243–377.10.1016/S0065-2156(08)70009-7 ↗
20. Chaboche, J. L. , 1989, “Constitutive equations for cyclic plasticity and cyclic viscoplasticity,” Int. J. Plast., 5, pp. 247–302.10.1016/0749-6419(89)90015-6 ↗
21. Bodner, S. R., and Partom, Y., 1975, “Constitutive equations for elastic-viscoplastic strain-hardening materials,” ASME J. Appl. Mech., 42, pp. 385–389.10.1115/1.3423586 ↗
22. Lemaitre, J., and Chaboche, J.-L., 1990, Mechanics of Solid Materials, Cambridge University Press, Cambridge, U.K.10.1017/CBO9781139167970 ↗
23. Chan, K. S., Bodner, S. R., and Lindholm, U. S., 1988, “Phenomenological modelling of hardening and thermal recovery in metals,” ASME J. Eng. Mater. Technol., 110, pp. 1–8.10.1115/1.3226003 ↗
24. Marquardt, D. W. , 1963, “An algorithm for least square estimation of parameters,” J. Soc. Ind. Appl. Math., 11, pp. 431–441.10.1137/0111030 ↗
25. Abdel-Kader, M. S., and Eleiche, M. 1998, “Evaluation of Parameters of a Modified Chaboche Theory with Application to Inconel 718,” Proc. MECAMAT Besanc¸on 1988, pp. 519–535.
26. Klosowski, P., and Schmidt, R., 1993, “Geometrically Non-linear Transient Analysis of Laminated Composite Plates and Shells,” Z. Angew. Math Mech., 73, No. 7/8, pp. 903–906.
27. Palmerio, A. F., Reddy, J. N., and Schmidt, R., 1990, “On a moderate rotation theory of laminated anisotropic shells,” Int. J. Non-Linear Mech., 25, pp. 687–714.10.1016/0020-7462(90)90007-V ↗
28. Schmidt, T. R., and Reddy, J. N., 1988, “A Refined Small Strain and Moderate Rotation Theory of Elastic Anisotropic Shells,” ASME J. Appl. Mech., 55, pp. 611–617.10.1115/1.3125837 ↗