Determination of Critical Strains in Isotactic Polypropylene by Cyclic Loading-Unloading
Source abstract
Abstract
By analyzing the deformation of α—isotactic polypropylene through cyclic uniaxial compression at different temperatures—conclusions are drawn on the contribution of the crystalline phase and the amorphous phase to the hardening curve. The deformation of the crystalline phase, which deforms mainly by simple shear of the crystallites, strongly depends on the properties of the amorphous phase. A separation of strain in a relaxing and a quasipermanent part, as introduced by the work of Hiss et al. (1999, “Network Stretching, Slip Processes and Fragmentation of Crystallites During Uniaxial Drawing of Polyethylene and Related Copolymers,” Macromolecules, 32, pp. 4390–4403), is undertaken. By this experimental procedure it is possible to characterize the deformation dependence of several physical quantities such as Young’s modulus or the stored energy associated to each loading-unloading cycle. Furthermore specific transition strains, A, B, C, and D, can be determined where the recovery properties change. It is demonstrated that beyond point C the strain hardening can be described by the simple rubber hardening model of Haward (1987, “The Application of a Simplified Model for the Stress-Strain Curve of Polymers,” Polymer, 28, pp. 1485–1488).
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer crystallization and properties · Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Physics of Nanostructured Materials, Faculty of Physics, University of Vienna, Boltzmanngasse 5, 1090 Wien, Austria
Laboratory of Polymer Engineering, LKT-TGM, Wexstrasse 19-23, 1200 Wien, Austria
Laboratory of Mechanics and Materials, Polytechnic School, Aristotele University of Thessaloni, Thessaloniki 54124, Greece
References (19)
Show source-provided references
1. Rate Mechanisms of Plasticity in Semi-Crystalline Polyethylene10.1016/j.polymer.2005.06.126 ↗
2. Evidence of Dislocations in Melt-Crystallised and Plastically Deformed Polypropylene
3. Structure and Plastic Deformation of Polyethylene10.1007/BF01162485 ↗
4. Strength and Toughness of Crystalline Polymer Systems10.1016/j.progpolymsci.2003.09.003 ↗
5. Network Stretching, Slip Processes and Fragmentation of Crystallites During Uniaxial Drawing of Polyethylene and Related Copolymers10.1021/ma981776b ↗
6. Influence of Molecular Parameters on High-Strain Deformation of Polyethylene in the Plane-Strain Compression. Part II. Strain Recovery10.1016/j.polymer.2005.07.096 ↗
7. Understanding of the Tensile Deformation in HDPE/LDPE Blends Based on Their Crystal Structure and Phase Morphology10.1016/S0032-3861(02)00940-0 ↗
8. Spieckermann, F. , 2006, “Untersuchung der Mechanischen Eigenschaften und Anwendung von Verbundmodellen zur Bestimmung Phasenspezifischer Spannungs-Dehnungs-Kurven an Isotaktischem Polypropylen,” MS thesis, University of Vienna, Wien, Austria.
9. Moore
10. Kinetic of Crystallization From the Melt and Chain Folding in Polyethylene Fractions Revisited: Theory and Experiment10.1016/S0032-3861(97)00071-2 ↗
11. Regime III Crystallization in Polypropylene10.1021/ma00134a058 ↗
12. The Application of a Simplified Model for the Stress-Strain Curve of Polymers10.1016/0032-3861(87)90347-8 ↗
13. Strain Hardening of High Density Polyethylene10.1002/polb.21123 ↗
14. The Use of a Mathematical Model to Describe Isothermal Stress-Strain Curves in Glassy Thermoplastics10.1098/rspa.1968.0029 ↗
15. Role of the Entangled Amorphous Network in Tensile Deformation of Semicrystalline Polymers10.1103/PhysRevLett.91.095502 ↗
16. Application of Composite Models to Isotactic Polypropylene for the Determination of Phase Specific Stress-Strain Curves
17. Elastic Moduli of the Crystal Lattices of Polymers10.1002/polc.5070150107 ↗
18. Critical Strains in Tensile Deformed Polyamide 6 and 6/66 Copolymer10.1002/polb.20310 ↗
19. Critical Strains Determining the Yield Behavior of Syndiotactic Polypropylene10.1081/MB-100107561 ↗