A Practical Method for Fatigue Crack Initiation Detection Using an Ion-Sputtered Film
Source abstract
Abstract
The development of fatigue in a machine element can be divided into the fatigue crack initiation stage and the crack growth stage. The effects of the surface conditions, such as roughness and surface qualities, on the fatigue strength are considered to be restricted to the fatigue crack initiation stage. Thus, these effects can be evaluated exactly by the investigation on the fatigue crack initiation life. In this research a practical method is presented for detecting fatigue crack initiation during fatigue tests using an ion-sputtered film. Ion-sputtered films were formed on acrylic and steel test pieces having a specially designed round notch. Three-point bending fatigue tests were performed and the instants of fatigue crack initiation on the notched surface of both acrylic and steel test pieces during the tests were identified clearly; thus the fatigue crack initiation life can also be determined experimentally using the presented method. In addition, since the system used to measure the electric resistance of the film, which indicates the crack initiation, is extremely simple, that is, it consists of a variable resistor, a DC power source, and a data recorder, this method is considered very practical for monitoring crack initiation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor Technologies Research · Smart Materials for Construction · Sensor Technology and Measurement Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Systems Engineering, Faculty of Engineering, University of Miyazaki, Miyazaki 889-2192, Japan
Mechanical Systems Engineering Course, Graduate School of Engineering, University of Miyazaki, Miyazaki 889-2192, Japan
References (20)
Show source-provided references
1. Evaluation of the Strength of Carburized Spur Gear Teeth Based on Fracture Mechanics10.1299/jsmec1993.36.233 ↗
2. Effect of CBN Grinding on the Bending Strength of Carburized Gears10.1115/1.2829322 ↗
3. Numerical Modeling of the Crack Propagation Path at Gear Tooth
4. Fatigue Strength and Crack Growth of Carburized and Shot Peened Spur Gears
5. Fatigue Mechanics. An Assessment of a Unified Approach to Life Prediction
6. Method of Detecting Fatigue Crack Initiation Through Analysis of Strain Waveform10.1299/kikaia.58.1191 ↗
7. Detection of 1mm Fatigue Crack Initiation Using Strain Waveform10.1115/1.2904317 ↗
8. Detection of Fatigue Crack Initiation Under a Random Load10.1299/kikaia.60.1753 ↗
9. Surface Crack Detection by A. C. Potential Drop Method: Experiment and FEM Considerations10.1299/kikaia.62.2216 ↗
10. Multiple Surface Crack Detection Using A. C. Potential Drop Methd10.1299/kikaia.68.1220 ↗
11. Study on Detection and Quantitative Evaluation of Fatigue Cracks Using Surface SH Waves10.1299/kikaia.67.1508 ↗
12. Sensors for Monitoring Early Stage Fatigue Cracking10.1016/j.ijfatigue.2007.01.023 ↗
13. MWM Eddy Current Sensors for Monitoring of Crack Initiation and Growth During Fatigue Tests and in Service10.1016/S0142-1123(01)00154-2 ↗
14. MWM Eddy-Current Arrays for Crack Initiation and Growth Monitoring10.1016/j.ijfatigue.2003.08.010 ↗
15. Early Detection and Monitoring of Fatigue in High Strength Steels With MWM-Arrays10.1016/j.ijfatigue.2005.07.028 ↗
16. Crack Length Measurement With A Grid Pattern Ion Sputtered Film
17. Fatigue Crack Length Measurement Method With an Ion Sputtered Film
18. Crack Length Measurement With an Ion Sputtered Metal Film10.1299/kikaic.73.849 ↗
19. Evaluation of the Strength of Carburized Spur Gear Teeth Based on Fracture Mechanics (3rd report, The Crack Growth in Carburized Gear)10.1299/kikaic.57.909 ↗
20. Surface Film Technique for Crack Length Measurement in Nonconductive Brittle Materials: Calibration and Evaluation10.1016/0013-7944(91)90213-K ↗