journal article·2005-04-01

Mesodamage Evolution in Polycrystals

M. Chadli, A. Abdul-Latif

Publisher page

Abstract

A micromechanical model of damaged elasto-inelastic behavior is proposed to predict the plastic fatigue life for fcc metallic polycrystals under multiaxial loading paths. This model is expressed in the time-dependent plasticity for a small strain assumption. In order to generalize and then to increase the model applicability (with respect to other works of the author) in describing the cyclic stress-strain evolution during plastic fatigue, it is therefore assumed that a damage variable initiates and then evolves at the grain level where the phenomenon of the localized plastic deformation occurs. The associated thermodynamic force of the damage variable is determined as a total granular energy (elastic and inelastic). The transition of the elastic strain from the single to the polycrystal, which is classically performed by averaging procedures in this type of modeling, is modified due to the coupling of such a strain with damage. The developed model is tested under different multiaxial cyclic loading situations (tension-compression and tension-torsion with different out-of-phase angles). The effects the loading paths and the grains aggregate type on the fatigue life are appropriately investigated. It is demonstrated that the model can correctly describe the overall and local damaged behavior of polycrystals.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

L3M, IUT de Tremblay, 93290 Tremblay-en-France, France

References (24)

Show source-provided references
1. Neumann, P., 1983, “Fatigue,” in Physical Metallurgy, R. W. Cahn and P. Haasen, eds., Elsevier, Amsterdam.
2. Pineau, A., 1979, “Sollicitation Cyclique des Alliages Durcis par Pre´cipitation, Dislocations et De´formation Plastique,” Yravals, Les Editions de Physique, pp. 383–393.
3. Chaboche, J. L. , 1977, “Viscoplastic Constitutive Equations for Description of Cyclic and Anisotropic Behavior of Metals,” Bull. Acad. Pol. Sci., Ser. Sci. Tech., 25, pp. 33–42.
4. Krajcinovic, D., and Fonseka, G. U., 1981, “The Continuous Damage Mechanics of Brittle Materials, Part I and II,” ASME J. Appl. Mech., 48, pp. 809–824.10.1115/1.3157739 ↗
5. Cordebois, J. P., and Sidoroff, F., 1979, “Damage Induced Elastic Anisotropy,” Colloque Euromech 115, Villard de Lans, France.
6. Lemai^tre, J., and Chaboche, J. L., 1985, “Me´canique des Mate´riaux Solides,” Dunod, Bordas, Paris.
7. Simo, J. C., and Ju, J. W., 1987, “Strain- and Stress-Based Continuum Damage Models—Part I and II,” Int. J. Solids Struct., 23, pp. 821–841.10.1016/0020-7683(87)90084-9 ↗
8. Ju, J. W. , 1989, “On Energy-Based Coupled Elastoplastic Damage Theories: Constitutive Modeling and Computational Aspects,” Int. J. Solids Struct., 25, p. 803803.10.1016/0020-7683(89)90015-2 ↗
9. Chaboche, J. L. , 1993, “Development of Continuum Damage Mechanics for Elastic Solids Sustaining Anisotropic and Unilateral Damage,” Int. J. Damage Mech., 3, p. 311311.10.1177/105678959300200401 ↗
10. Chow, C. L., and Wei, Y., 1999, “Constitutive Modeling of Material Damage for Fatigue Failure Prediction,” Int. J. Damage Mech., 8, pp. 355–375.10.1177/105678959900800405 ↗
11. Abdul-Latif, A., and Saanouni, K., 1994, “Damaged Anelastic Behavior of FCC Poly-Crystalline Metals With Micromechanical Approach,” Int. J. Damage Mech., 3, p. 237237.10.1177/105678959400300301 ↗
12. Saanouni, K., and Abdul-Latif, A., 1996, “Micromechanical Modeling of Low Cycle Fatigue Under Complex Loadings—Part I: Theoretical Formulation,” Int. J. Plast., 12, p. 11111111.10.1016/S0749-6419(96)00043-5 ↗
13. Abdul-Latif, A., and Saanouni, K., 1996, “Micromechanical Modeling of Low Cycle Fatigue Under Complex Loadings—Part II: Applications,” Int. J. Plast., 12, p. 11231123.10.1016/S0749-6419(96)00044-7 ↗
14. Abdul-Latif, A., and Saanouni, K., 1997, “Effect of Some Parameters on the Plastic Fatigue Behavior With Micromechanical Approach,” Int. J. Damage Mech., 6, p. 433433.10.1177/105678959700600404 ↗
15. Abdul-Latif, A., Ferney, V., and Saanouni, K., 1999, “Fatigue Damage of Waspaloy Under Complex Loading,” ASME J. Eng. Mater. Technol., 121, p. 278278.10.1115/1.2812376 ↗
16. Saanouni, K., Forster, Ch., and Benhatira, F., 1994, “On the Anelastic Flow With Damage,” Int. J. Damage Mech., 3, p. 140140.10.1177/105678959400300203 ↗
17. Franciosi, P., 1978, “Plasticite´ a` froid des monocristaux C.F.C.: Etude du Durcissement Latent,” The`se d’e´tat, Univ. of Paris XIII.
18. Poubanne, P., Nouailhas, D., and Cailletaud, G., 1988, “Modeling of Viscoplastic Anisotropic Behavior of Single Crystals,” Proc. Mecamat on Inelastic Behavior of Solids: Modeling and Utilization, Besanc¸on, France, 30 August–1 September.
19. Berveiller, M., and Zaoui, A., 1979, “An Extension of the Self-Consistent Scheme to Plasticity Flowing Polycrystals,” J. Mech. Phys. Solids, 26, p. 325325.10.1016/0022-5096(78)90003-0 ↗
20. Pilvin, P., 1990, “Approches Multie´chelles pour la Pre´vision du Comportement Ane´lastique des Me´taux,” The`se de Doctorat, Univ. Paris VI.
21. Abdul-Latif, A. , 2004, “Pertinence of the Grains Aggregate Type on the Self-Consistent Model Response,” Int. J. Solids Struct., 41, pp. 305–322.10.1016/j.ijsolstr.2003.09.014 ↗
22. Ferney, V., 1994, “Etude de l’Ecrouissage Cyclique sous Sollicitations Complexes,” The`se de Doctorat de l’Universite´ de Technologie de Compie`gne.
23. Abdul-Latif, A. , 2004, “A Comparison of Two Self-Consistent Models to Predict the Cyclic Behavior of Polycrystals,” ASME J. Eng. Mater. Technol., 126, pp. 62–69.10.1115/1.1633572 ↗
24. Abdul-Latif, A., Clavel, M., Ferney, V., and Saanouni, K., 1994, “On the Modeling of Non-Proportional Cyclic Plasticity of Waspaloy,” ASME J. Eng. Mater. Technol., 116, pp. 35–44.10.1115/1.2904253 ↗