journal article·2012-04-01

Modeling of Microchannel Hydroforming Process With Thin Metallic Sheets

Zhutian Xu, Linfa Peng, Peiyun Yi, Xinmin Lai

Publisher page

Abstract

Micro/mesoscale metal sheet hydroforming (SHF) process is an efficient approach suitable for mass production to fabricate metal parts with micro/mesochannel features. In conventional sheet hydroforming process, the channel’s feature sizes (e.g., the channel width, fillet radius, etc.) are much greater than the sheet’s thickness, so that the influence of the fillet and the inhomogeneous stress/strain distribution through the thickness direction can be ignored. However, the influence becomes increasingly important, because the thickness of the sheet and the feature dimensions of the microchannel are in the same magnitude as the feature sizes of the material and tools reduced to micro/mesoscale. In this paper, an analytical model with consideration of the inhomogeneous stress/strain distribution was developed to predict the channel profile at different pressures in micro/mesohydroforming process. Plane-strain deformation behaviors in the section of the workpiece were studied, and the relation function between the pressure and the channel height was established. Via this function, the channel height could be accurately predicted for a given pressure. Furthermore, an experimental setup was prepared, hydroforming experiments using microchannel dies with various geometric dimensions were conducted, and the channel height of the workpieces was measured. It was found that the experimental results matched well with the simulation results, which confirmed the validity of the analytical model proposed in this study. It is expected that the model will be beneficial in the optimization of the microchannel hydroforming process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Shanghai Key Laboratory of Digital Auto Body Engineering, Shanghai Jiao Tong University, Shanghai 200240, People’s Republic of China

Shanghai Key Laboratory of Digital Auto Body Engineering, Shanghai Jiao Tong University, Shanghai 200240, People’s Republic of China; State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai 200240, People’s Republic of China

References (34)

Show source-provided references
2. Developments in Hydroforming10.1016/S0924-0136(98)00423-3 ↗
3. Hydroforming Highlights: Sheet Hydroforming and Tube Hydroforming10.1016/j.jmatprotec.2004.04.032 ↗
4. Applications of Hydroforming Processes to Automobile Parts10.1016/j.jmatprotec.2004.12.013 ↗
5. Tube Hydroforming: State-of-the-Art and Future Trends10.1016/S0924-0136(99)00302-7 ↗
6. An Overall Review of the Tube Hydroforming (THF) Technology10.1016/j.msea.2011.03.005 ↗
7. Recent Developments in Sheet Hydroforming Technology10.1016/j.jmatprotec.2004.04.054 ↗
8. Hydroforming of Sheet Metal Pairs10.1016/S0924-0136(98)00347-1 ↗
9. Manufacturing System for the Integrated Hydroforming, Trimming and Welding of Sheet Metal Pairs10.1016/S0924-0136(01)00763-4 ↗
10. Hydroforming of Sheet Metal Pairs From Aluminium Alloys10.1016/S0924-0136(01)00766-X ↗
11. Hydroforming of Sheet Metal Using a Viscous Pressure Medium10.1016/S0924-0136(03)00849-5 ↗
12. Microforming—From Basic Research to Its Realization10.1016/s0924-0136(02)00415-6 ↗
13. Mesoscopic Model: Advanced Simulation of Microforming Processes10.1007/s11740-007-0034-8 ↗
14. Modelling of Localised Thinning Features in the Hydroforming of Micro-Tubes Using the Crystal-Plasticity FE Method10.1007/s00170-009-2134-4 ↗
15. Modeling of Grain Size Effect on Micro Deformation Behavior in Micro-Forming of Pure Copper10.1016/j.msea.2010.07.009 ↗
16. Size Effect on Material Surface Deformation Behavior in Micro-Forming Process10.1016/j.msea.2011.03.005 ↗
17. Investigation of Micro/Meso Sheet Soft Punch Stamping Process—Simulation and Experiments10.1016/j.matdes.2008.05.074 ↗
18. Forming of Micro Channels With Ultra Thin Metal Foils10.1016/S0007-8506(07)60689-1 ↗
19. Fabrication of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cell by Flexible Forming Process-Numerical Simulations and Experiments10.1115/1.3207870 ↗
20. Fabrication of Micro-Channel Arrays on Thin Metallic Sheet Using Internal Fluid Pressure: Investigations on Size Effects and Development of Design Guidelines10.1016/j.jpowsour.2007.09.036 ↗
21. Numerical Modeling of the Multi-Stage Sheet Pair Hydroforming Process10.1016/j.jmatprotec.2004.04.124 ↗
22. Investigation of Size Effects on Material Behavior of Thin Sheet Metals Using Hydraulic Bulge Testing at Micro/Meso-Scales10.1016/j.ijmachtools.2008.01.006 ↗
23. Finite Element Analysis of Sheet Hydromechanical Forming of Circular Cup10.1016/j.jmatprotec.2008.03.070 ↗
24. Analytical Model for Planar Tube Hydroforming: Prediction of Formed Shape, Corner Fill, Wall Thinning, and Forming Pressure10.1016/j.ijmecsci.2008.05.006 ↗
25. A Theory of the Plastic Bulging of a Metal Diaphragm by Lateral Pressure10.1080/14786445008561154 ↗
26. Hydrostatic Bulging of Circular Diaphragms10.1243/03093247V053155 ↗
27. Determination of Flow Stress for Sheet Metal Forming Using the Viscous Pressure Bulge (VPB) Test10.1016/S0924-0136(03)00838-0 ↗
28. Hydroforming Sheet Metal With Intermittent Changes in the Draw-in Condition of the Flange10.1016/S0924-0136(96)02602-7 ↗
29. Modeling of the Hydroforming of Sheet Materials Clamped With Varying Blank Holding Loads10.1115/1.3225941 ↗
30. Superplastic Forming of a Spherical Shell Out a Welded Envelope10.1016/s0921-5093(01)01376-4 ↗
31. Pressure Estimation in the Hydroforming Process of Sheet Metal Pairs With the Method of Upper Bound Analysis10.1016/j.jmatprotec.2008.05.020 ↗
32. An Experimental Study on the Comparative Assessment of Hydraulic Bulge Test Analysis Methods10.1016/j.matdes.2010.05.057 ↗
33. Work-Hardening Behaviour of Nitrogen-Alloyed Austenitic Stainless Steels10.1016/0921-5093(91)90655-7 ↗
34. Modified Stress-Strain Relation for FCC Metals and Alloys10.1007/bf02813258 ↗