journal article·2007-10-01

Experimental Technique for Elevated Temperature Mode I Fatigue Crack Growth Testing of Ni-Base Metal Foils

L. Liu, J. W. Holmes

Publisher page

Abstract

Details are provided for an experimental approach to study the tensile fatigue crack growth behavior of very thin metallic foils. The technique utilizes a center-notched specimen and a hemispherical bearing alignment system to minimize bending strains. To illustrate the technique, the constant amplitude fatigue crack growth behavior of a Ni-base superalloy foil was studied at temperatures from 20°C to 760°C. The constant amplitude fatigue tests were performed at a frequency of 2Hz and stress ratio of 0.2. The crack growth rate versus stress intensity range data followed a Paris relation with a stress intensity range exponent m between 5 and 6; this exponent is significantly higher than what is commonly observed for thicker materials and indicates very rapid fatigue crack propagation rates can occur in thin metallic foils.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials and Aerospace Structures Laboratory, School of Aerospace Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0150

References (18)

Show source-provided references
1. Vanswijgenhoven, E., and Holmes, J. W., 2001, “Fatigue Crack Growth in Inconel 718 Superalloy Foil at Elevated Temperature,” Fifth International Special Emphasis Symposium on Superalloys 718, 25, 706, and Derivatives, Pittsburgh, June 17–20.10.7449/2001/Superalloys_2001_669_678 ↗
2. Low Cycle Fatigue and Fatigue Crack Growth Behavior of Alloy IN 718
3. Effect of Heat-Treatment and Heat-to-Heat Variations in the Fatigue Crack Growth Response of Alloy 71810.1016/0013-7944(85)90109-2 ↗
4. Yang, D., Liu, L., and Holmes, J. W., 2006, “Fatigue Crack Growth Behavior of Ti-Alloy Foils,” 2006 Chinese MRS, Beijing, June 25.
5. Lamberson, L., and Holmes, J. W., 2005, “Thickness Effect on Fatigue Behavior of Aluminum and Ni-Base Alloys,” MESO Mechanics International Conference, Montreal, July 31–Aug. 4.
6. Fatigue and Fracture of Thin Metallic Foils10.1023/A:1010931414732 ↗
7. Liu, L., and Holmes, J. W., “Fatigue Testing of Metallic Aerospace Thermal Protection Systems,” Int. J. Fract.0376-9429, submitted.
8. Liu, L., and Holmes, J. W., 2004, “Tensile & Shear Fatigue of Metallic TPS & Polymer Sandwich Materials,” ASME International Mechanical Engineering Congress & Exposition, Long Beach, CA, Nov. 13–19.
9. Fatigue Damage in Aerospace Thermal Protection Systems
10. Broek, D., and Schijve, J., 1966, “The influence of sheet thickness on crack propagation,” Aircr. Eng.0002-2667, pp. 31–33.
11. Miniaturized Fatigue Crack Growth Specimen Technology and Results
12. Optimization of Fatigue Crack Growth Testing for First Wall Materials Development Evaluation
13. The Influence of Cross-Sectional Thickness on Fatigue Crack Growth10.1046/j.1460-2695.1999.00176.x ↗
14. Karlsson & Sorensen, Abacus Finite Element Program, Version 6.5, Hibbit, Karlsson & Sorensen, Inc., Pawtucket, RI.
15. Special Metals Corp., Inconel Alloy 617 data sheet, www.specialmetals.com
16. Smith, G. D., and Yates, D. H., “Optimization of the Fatigue Properties of INCONEL Alloy 617,” ASME International Gas Turbine and Aeroengine Congress and Exhibition, Orlando, ASME Paper No. 91-GT-161.
17. Recent Advances in the Enhancement of INCONEL Alloy 617 Properties to Meet the Needs of the Gas Turbine Industry
18. Tada