journal article·2009-10-01

Microstructure Design to Improve Wear Resistance in Bioimplant UHMWPE Materials

D. S. Li, H. Garmestani, S. Ahzi, M. Khaleel, D. Ruch

Publisher page

Abstract

A microstructure design framework for multiscale modeling of wear resistance in bioimplant materials is presented here. The increase in service lifetime of arthroplasty depends on whether we can predict wear resistance and microstructure evolution of a bioimplant material made from ultra high molecular weight polyethylene during processing. Experimental results show that the anisotropy introduced during deformation increases wear resistance in desired directions. After uniaxial compression, wear resistance along the direction, perpendicular to compression direction, increased 3.3 times. Micromechanical models are used to predict microstructure evolution and the improvement in wear resistance during processing. Predicted results agree well with the experimental data. These models may guide the materials designer to optimize processing to achieve better wear behavior along desired directions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Georgia Institute of Technology, 771 Ferst Drive, Atlanta, GA 30332-0245

IMFS, University of Strasbourg, 2 Rue Boussingault, 67000 Strasbourg, France

Computational Science and Mathematics Division, Pacific Northwest National Laboratory, Richland, WA 99352

Public Research Centre Henri Tudor, AMS, 66 rue de Luxembourg, B.P. 144 4002 Esch/Alzette, Luxembourg

References (30)

Show source-provided references
1. Prevalence of Primary and Revision Total Hip and Knee Arthroplasty in the United States From 1990 Through 200210.2106/JBJS.D.02441 ↗
2. The Epidemiology of Revision Total Hip Arthroplasty in the United States10.2106/JBJS.H.00155 ↗
3. Changes in Surgical Loads and Economic Burden of Hip and Knee Replacements in the US: 1997-200410.1002/art.23525 ↗
4. Osteolysis—Basic Science, Incidence and Diagnosis10.1016/j.cuor.2004.03.002 ↗
5. Hip Implants: Paper V. Physiological Effects10.1016/j.matdes.2004.10.028 ↗
6. Earle, E. D. , 2000, “Continuous Extrusion of Recovered Ultra-High Molecular Weight Polyethylene,” Dorchester Industries, Inc.
7. Park
8. Biomaterials in Total Joint Replacement
9. Friction in Hip Prostheses10.1016/S0142-9612(97)00034-3 ↗
10. Wear Behaviour of Cross-Linked Polyethylene Assessed In Vitro Under Severe Conditions10.1016/j.biomaterials.2004.07.070 ↗
11. Wear Behavior of UHMWPE Sliding on Artificial Hip Arthroplasty Materials10.1016/j.matchemphys.2003.10.021 ↗
12. Orientation of Plane Strain-Compressed Ultrahigh-Molecular-Weight Polyethylene10.1016/S0032-3861(98)00163-3 ↗
13. Study of Crystalline Orientation in Drawn Ultra-High-Molecular-Weight Polyethylene Films10.1002/polb.1993.090310303 ↗
14. Single-Crystal-Like Orientation of Ultrahigh-Molecular-Weight Polyethylene by Uniaxial Stretching10.1002/polb.1988.090260912 ↗
15. Texture Evolution and Stress Relaxation of Linear Low Density Polyethylene During Uniaxial Extension
16. Crystallographic Texture Evolution in High Density Polyethylene During Uniaxial Tension10.1016/S0032-3861(00)00829-6 ↗
17. The Role of Crystallinity in the Crystallographic Texture Evolution of Polyethylenes During Tensile Deformation10.1016/S0032-3861(03)00527-5 ↗
18. Wear Resistance and Microstructure in Annealed Ultra High Molecular Weight Polyethylenes10.1134/S0965545X08050076 ↗
19. Non Linear Strain Rate Dependency and Unloading Behavior of Semi-Crystalline Polymers
20. Micromechanically Based Formulation of the Cooperative Model for the Yield Behavior of Semi-Crystalline Polymers10.1016/j.actamat.2007.12.015 ↗
21. Simulation of Large Strain Plastic Deformation and Texture Evolution in High Density Polyethylene10.1016/0032-3861(93)90039-D ↗
22. Polycrystalline Plastic Deformation and Texture Evolution for Crystals Lacking 5 Independent Slip Systems10.1016/0022-5096(90)90029-4 ↗
23. Large Inelastic Deformation of Glassy-Polymers.1. Rate Dependent Constitutive Model10.1016/0167-6636(88)90003-8 ↗
24. A Pade Approximant to the Inverse Langevin Function10.1007/BF00366640 ↗
25. Composite Modeling for the Effective Elastic Properties of Semicrystalline Polymers10.2140/jomms.2007.2.1 ↗
26. Comparison of Micromechanical Models for the Prediction of the Effective Elastic Properties of Semicrystalline Polymers: Application to Polyethylene10.1134/S0965545X08050064 ↗
27. Origin of Gamma Relaxations in Polyethylene and Polytetrafluoroethylene10.1002/pol.1969.160070804 ↗
28. Fluctuation Formula for Elastic Constants10.1103/PhysRevB.54.1 ↗
29. Predicting and Understanding the Elastic Properties of Polymers Using Atomistic Simulation10.2516/ogst:1996012 ↗
30. Ludema