journal article·2005-07-01

Localized Necking Criterion for Strain-Softening Materials

C. L. Chow, M. Jie, X. Wu

Publisher page

Abstract

The paper presents the development of a localized necking criterion based on the singularity of acoustic tensor. This criterion is applicable to materials exhibiting strain-softening behavior. The tensor form of the criterion is deployed in simple mathematical expressions, based on which the forming limit diagrams (FLDs) of strain-softening materials can be determined. At the left-hand side of a FLD, or the negative strain ratio region, a closed-form expression of localized band inclination is derived as a function of the strain-ratio value. At the right-hand side of a FLD, or the positive strain ratio regions, the localized band is assumed to be perpendicular to major strain according to the MK [Marciniak and Kuczynski (1967)] model. On both sides of the FLD, the localized necking criteria are analytically expressed by elements of tangent modulus matrix. For the sake of illustration of the proposed criterion, a special case of localized necking employing associative and isotropic plasticity is presented. The material chosen for the illustration is AA-6061 at an elevated temperature. The proposed criterion is also applicable to the formability of other metals at high temperatures and other strain-softening materials such as rocks.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · High-Velocity Impact and Material Behavior · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, University of Michigan-Dearborn, Dearborn, MI 48128

Department of Mechanical Engineering, Wayne State University, Detroit, MI 48202

References (45)

Show source-provided references
1. Seydel
2. On the uniqueness of the theory of plasticity
3. A definition of stable inelastic material
4. Plastic instability under plane stress10.1016/0022-5096(52)90002-1 ↗
5. Tensile instability in thin-walled tubes10.1243/JMES_JOUR_1962_004_034_02 ↗
6. Tensile plastic instability under complex stress10.1016/0020-7403(63)90039-0 ↗
7. Tensile plastic instability of thin tubes, I, II10.1016/0020-7403(65)90010-X ↗
8. Instability strains in plane street under biaxial stress
9. Plastic instability in simple stretching of sheet metals
10. On discontinuous plastic states with special reference to localized necking in thin sheets10.1016/0022-5096(52)90003-3 ↗
11. Limit strains in the process of stretch-forming sheet metal10.1016/0020-7403(67)90066-5 ↗
12. Marciniak–Kuczynski approach to calculating forming limit diagrams
13. Limits to formability in rate-sensitive materials
14. Prediction of the forming limit diagrams of anisotropic sheets in linear and nonlinear loading10.1016/0025-5416(85)90404-5 ↗
15. Plastic behavior and stretchability of sheet metals, Part II: Effect of yield surface shape on sheet forming limit10.1016/0749-6419(89)90026-0 ↗
16. Application of Hill’s new yield theory to sheet metal forming—Part I. Hill’s 1979 criterion and its application to predicting sheet forming limit10.1016/0020-7403(89)90001-5 ↗
17. Calculations of forming limit diagrams
18. Instability and fracture in sheet metal10.1088/0022-3727/7/7/307 ↗
19. Some comments on the limit strains in sheet metal stretching10.1016/0020-7403(75)90053-3 ↗
20. Plastic flow properties in relation to localized necking in sheets10.1007/978-1-4613-2880-3_12 ↗
21. The effect of void growth on the limit strains of steel sheets10.1016/0020-7403(83)90033-4 ↗
22. Properties of discontinuous bifurcation solutions in elastoplasticity10.1016/0020-7683(91)90131-X ↗
23. Bifurcations in elastic–plastic materials10.1016/0020-7683(93)90185-A ↗
24. A general theory of uniqueness and stability in elastic–plastic solids10.1016/0022-5096(58)90029-2 ↗
25. Acceleration waves in solids10.1016/0022-5096(62)90024-8 ↗
26. Conditions for the Localization of Deformation in Pressure-sensitive Dilatant Materials10.1016/0022-5096(75)90001-0 ↗
27. The localization of plastic deformation
28. A note on some features of the theory of localization of deformation10.1016/0020-7683(80)90019-0 ↗
29. Rudnicki and Rice’s analysis of strain localization revisited10.1115/1.2900992 ↗
30. On the eigenvalues of the fourth-order constitutive tensor and loss of strong ellipticity in elastoplasticity
31. On linear versus nonlinear flow rules in strain localization analysis10.1007/BF01576001 ↗
32. Uniqueness and localization—I. Associative and nonassociative elastoplasticity10.1016/0020-7683(91)90205-T ↗
33. Loss of strong ellipticity in nonassociative elastoplasticity10.1016/0022-5096(92)90017-V ↗
34. Comments on loss of strong ellipticity in elastoplasticity10.1016/S0020-7683(99)00062-1 ↗
35. Localized necking in thin sheets10.1016/0022-5096(75)90004-6 ↗
36. A unified bifurcation analysis of sheet metal forming limits10.1115/1.1370397 ↗
37. Forming limit analysis of sheet metals based on a generalized deformation theory10.1115/1.1586938 ↗
38. Forming limits of Al 6022 sheets with material damage consideration—theory and experimental validation10.1016/j.ijmecsci.2004.02.003 ↗
39. Damage based formability analysis of sheet metal with LS-DYNA10.1106/L2YK-N0YQ-G5NL-3VBB ↗
40. Effect of principal damage plane rotation in anisotropic damage plastic model10.1106/6ENW-PLMH-M20N-5TP6 ↗
41. A Generalized Mixed Kinematic-isotropic Hardening Plastic Model Coupled with anisotropic Damage for Sheet Metal Forming10.1177/1056789504039258 ↗
42. Hosford
43. A three-dimensional model of anisotropic hardening in metals and its application to the analysis of sheet metal formability10.1016/0022-5096(84)90008-5 ↗
44. Elevated temperature formability of some engineering metals for gas forming of automotive structures
45. The influence of strain-path changes on forming limit diagrams of Al 6111-T410.1016/0020-7403(94)90053-1 ↗