Slow Strain Rate Fracture Characteristics of Steel and Aluminum Alloys Tested in Mercury Environments
Source abstract
Abstract
Slow strain rate tensile tests performed on Type 304 stainless steel, A516 Grade 70 C-Mn steel, and aluminum alloy 5083 revealed that all three materials were susceptible to varying degrees of mercury liquid metal embrittlement (LME) at ambient conditions. Both Type 304 stainless and A516 Grade 70 C-Mn steels exhibited significant strain rate sensitivity to LME, while aluminum alloy 5083 embrittlement was independent of strain rate over the range tested (8.3 × 10−3 to 5.0 × 10−7 s−1). Ductility (reduction in area) and toughness losses for tests in mercury compared to respective tests in air indicated that aluminum alloy 5083 embrittlement was more acute than either steel. Crack arrest (secondary cracking) characteristics and reactions to different mercury species also suggested that Type 304 stainless and A516 Grade 70 C-Mn steels were less susceptible to mercury LME than aluminum alloy 5083.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Nuclear Materials and Properties · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mobil Research and Development Corporation, Materials Engineering Section, Paulsboro, N.J. 08066
References
Reference metadata was not supplied for this record.