The Modeling of Unusual Rate Sensitivities Inside and Outside the Dynamic Strain Aging Regime
Source abstract
Abstract
The viscoplasticity theory based on overstress (VBO) is altered by introducing an augmentation function into the dynamic recovery term of the growth law of the equilibrium stress, which is a tensor valued state variable of the model. It is a measure of the defect structure of metals and alloys. The flow law is unaltered but affected by the equilibrium stress whose growth is modified by the augmentation function. The augmentation function does not affect the initial, quasi-elastic region but exhibits a strong influence on the long-time, asymptotic solution that applies approximately when the flow stress is reached in a laboratory experiment. On the basis of the long-time asymptotic solution positive (stress increases with strain rate), zero (no influence of strain rate) and negative rate sensitivity (stress decreases with an increase in strain rate) can be easily modeled. In the simplest case the augmentation function is a constant and the rate sensitivity remains equal throughout the deformation. The modeling of a change from one kind of rate sensitivity, say negative, to another, say positive can be accomplished by making the augmentation function dependent on the accumulated, effective inelastic strain. The theory is applied to model the varying rate sensitivity of a modified 9Cr-1Mo steel, which changes from negative, to zero and to positive with temperature. The unusual rate sensitivities are modeled well together with relaxation and strain rate change tests.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanics of Materials Laboratory, Rensselaer Polytechnic Institute, Troy, NY 12180-3590
References (24)
Show source-provided references
1. Pugh, C. E., Liu, C. K., et al., 1972, Currently recommended constitutive equations for inelastic design analysis of FFTF components, ORNL-TM-3602, Oak Ridge National Laboratory, Sept.10.2172/4623634 ↗
2. Krausz, A., and Krausz, K., 1996, Unified Constitutive Laws of Plastic Deformation, San Diego, Academic Press.10.1016/B978-012425970-6/50006-0 ↗
3. Mulford, R. A., and Kocks, U. F., 1979, “New observations on the mechanisms of dynamic strain aging and of jerky flow,” Acta Metall., 27, pp. 1125–1134.10.1016/0001-6160(79)90130-5 ↗
4. Kishore, R., Singh, R. N., et al., 1997, “Effect of dynamic strain aging on the tensile properties of a modified 9Cr-1Mo steel,” J. Mater. Sci., 32, pp. 437–442.10.1016/0956-716X(94)00020-I ↗
5. Miller, A. K., and Sherby, O. D., 1978, “A simplified phenomenogical model for non-elastic deformation: Predictions of pure Aluminum behavior and incorporation of solute strengthening effects,” Acta Metall., 26, pp. 289–304.10.1016/0001-6160(78)90129-3 ↗
6. Ruggles, M. B., and Krempl, E., 1989, “The influence of test temperature on the ratchetting behavior of Type 304 Stainless Steel,” ASME J. Eng. Mater. Technol., 111, pp. 378–383.10.1115/1.3226483 ↗
7. Rao, K. B. S., Castelli, M. G., et al., 1997, “A critical assessment of the mechanistic aspects in Haynes-188 during low-cycle fatigue in the range of 25 to 1000 C,” Metall. Mater. Trans. A, 28A, p. 347347.10.1007/s11661-997-0137-z ↗
8. Ho, K., 1998, “Application of the viscoplasticity theory based on overstress to the modeling of dynamic strain aging of metals and to solid polymers, specifically Nylon 66,” Ph.D. thesis, Rensselaer Polytechnic Institute, Mech. Eng. Aeronaut. Eng. Mech.
9. Nakamura, T. , 1998, “Application of viscoplasticity theory based on overstress (VBO) to high temperature cyclic deformation of 316 FR steel,” JSME Int. J., Ser. A, 41, pp. 539–546.10.1299/jsmea.41.539 ↗
10. Yaguchi, M. and Takahashi, Y., 1999, “Unified inelastic constitutive model for modified 9Cr-1Mo steel incorporating dynamic strain aging effect,” JSME Int. J., Ser. A, 42, pp. 1–10.10.1299/jsmea.42.1 ↗
11. Estrin, Y., 1996, Dislocation-Density-Related Constitutive Modeling, Unified Constitutive Laws of Plastic Deformation, Krausz, A. S., and Krausz, K., eds., Academic Press, San Diego, CA, pp. 69–106.10.1016/B978-012425970-6/50003-5 ↗
12. Henshall, G. A., Helling, D. E., et al., 1996, Improvements in the MATMOD Equations for Modeling Solute Effects and Yield-Surface Distortion, Unified Constitutive Laws of Plastic Deformation, Krausz, A. S., and Krausz, K., eds., Academic Press, San Diego, CA, pp. 153–227.10.1016/B978-012425970-6/50005-9 ↗
13. Ho, K., and Krempl, E., 1998, “Modeling of rate independence and of negative rate sensitivity using the viscoplasticity theory based on overstress (VBO),” in press, Mechanics of Time-Dependent Materials.
14. Ho, K., and Krempl, E., 1999, “Extension of the viscoplasticity theory based on overstress (VBO) to capture nonstandard rate dependence in solids,” in press, Int. J. Plast.
15. Tachibana, Y., and Krempl, E., 1998, “Modeling of high homologous temperature deformation behavior using the viscoplasticity theory based on overstress (VBO): Part III-A simplified model,” ASME J. Eng. Mater. Technol., 120, pp. 193–196.10.1115/1.2812341 ↗
16. Krempl, E., and Kallianpur, V. V., 1985, “The uniaxial unloading behavior of two engineering alloys at room temperature,” ASME J. Appl. Mech., 52, pp. 654–658.10.1115/1.3169116 ↗
17. Krempl, E., and Nakamura, T., 1998, “The influence of the equilibrium growth law formulation on the modeling of recently observed relaxation behaviors,” JSME Int. J., Ser. A, 41, pp. 103–111.10.1299/jsmea.41.103 ↗
18. Cernocky, E. P. and Krempl, E., 1979, “A nonlinear uniaxial integral constitutive equation incorporating rate effects, creep and relaxation,” Int. J. Non-Linear Mech., 14, pp. 183–203.10.1016/0020-7462(79)90035-0 ↗
19. Krempl, E., 1996, A Small Strain Viscoplasticity Theory Based on Overstress, Unified Constitutive Laws of Plastics Deformation, Krausz, A., and Krausz, K., eds., Academic Press, San Diego, pp. 281–318.10.1016/B978-012425970-6/50007-2 ↗
20. Yaguchi, M., and Takahashi, Y., 1997, Inelastic Behavior of Modified 9Cr-1Mo Steel and Its Description by constitutive Model Considering Dynamic Strain Aging, 14th International Conference on Structural Mechanics in Reactor Technology, Lyon, France.
21. Kalk, A. and Schwink, C. H., 1995, “On dynamic strain aging and the boundaries of stable plastic deformation studied on Cu-Mn polycrystals,” Philos. Mag., 72A, pp. 315–399.10.1080/01418619508239928 ↗
22. Choi, S. H., 1989, “Modeling of time-dependent mechanical deformation behavior of metals and alloys using the viscoplasticity theory based on overstress,” Ph.D. thesis, Rensellaer Polytechnic Institute, Mech. Eng., Aeronaut. Eng. Mech.
23. Majors, P. S. and Krempl, E., 1994, “The isotropic viscoplasticity theory based on overstress applied to the modeling of modified 9Cr-1Mo steel at 538C,” Mater. Sci. Eng., A186, pp. 23–34.10.1016/0921-5093(94)90302-6 ↗
24. Maciucescu, L., Sham, T.-L., et al., 1999, “Modeling the deformation behavior of a Pn-Pb solder alloy using the simplified viscoplasticity theory based on overstress (VBO),” ASME J. Electron. Packag., 121, pp. 92–98.10.1115/1.2792673 ↗