journal article·2002-07-01

Uniaxial Stress Deformation Experiment for Validation of 3-D Dislocation Dynamics Simulations

David H. Lassila, Mary M. LeBlanc, Gregory J. Kay

Publisher page

Abstract

An apparatus has been developed for performing compression deformation experiments on oriented metallic single crystals to provide data for validation of 3-D dislocation dynamics simulations. The experiment is performed under conditions that allow unconstrained motion of the upper and lower compression platen, and thus a relatively uniform state of axial stress is maintained during the deformation. Experiments have been performed on high-purity Mo single crystal and polycrystalline Cu. Various aspects of the experimental procedures and results are presented. Possible usages of the experimental data for the validation of 3-D dislocation dynamics simulations are discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Lawrence Livermore National Laboratory, P.O. Box 808, L-113, Livermore, CA 94551-0808

References (9)

Show source-provided references
1. Devincre, B., Pontikis, V., Brechet, Y., Canova, G., Condat, M., and Kubin, L., 1992, “Three Dimensional Simulations of Plastic Flow in Crystals,” Microscopic Simulations of Complex Hydrodynamic Phenomena, M. Mareshal and B. Holian, eds., Plenum Press, New York, pp. 413–423.10.1007/978-1-4899-2314-1_28 ↗
2. Zbib, H., Rhee, M., and Hirth, J., 1996, “3D Simulation of Curved Dislocations: Discretization and Long Range Interactions,” Advances in Engineering Plasticity and its Applications, Abe and T. Tsuta, eds., Elsevier Science, New York, pp. 15–20.10.1016/B978-0-08-042824-6.50009-X ↗
3. Schwarz, K., and Tersoff, J., 1996, “Interaction of Threading and Misfit Dislocations in a Strained Epiaxial Layer,” Appl. Phys. Lett., 69, pp. 1220-2.10.1063/1.117417 ↗
4. Ghoniem, N. M., and Bacaloni, M., 1997, “Finite Segment Method for 3-D Dislocation Dynamics,” Eng Report No. UCLA/MATMOD-97-01, University of California, Los Angeles, CA.
5. Rhee, M., Lassila, D., Bulatov, V., Hsiung, L., and Diaz de la Rubia, T., 2001, “Dislocation Multiplication in BCC Molybdenum: A Dislocation Dynamics Simulation,” Philos. Mag. Lett., 81(9), pp. 595–605.10.1080/09500830110069594 ↗
6. Christian, J. W. , 1983, “Some Surprising Features of the Plastic Deformation of Body-Centered Cubic Metals and Alloys,” Metall. Trans. A, 14A, pp. 1237–55.10.1007/BF02664806 ↗
7. Arsenault, R. J. , 1975, “Low Temperature of Deformation of bcc Metals and Their Solid-Solution Alloys,” Treatise on Mater. Sci. and Tech., 6, pp. 1–99.10.1016/B978-0-12-341806-7.50008-8 ↗
8. Bahr, D. F., Nibur, K. A., and Pang, M., 2002, “Strain Hardening and Cross Slip Measurements from Nanoindentation Experiments,” Plasticity, Damage and Fracture at Macro, Micro and Nano Scales, A. S. Khan and O. Lopez-Pamies, eds., NEAT Press, Fulton, MD, pp. 60–62.
9. Levine, L. E., Thomson, R., Savage, M. F., Kramer, D. E., and Shim, Y., 2002, “Single-Crystal Plasticity: Statistical Physics and Experiments,” Plasticity, Damage and Fracture at Macro, Micro and Nano Scales, A. S. Khan and O. Lopez-Pamies, eds., NEAT Press, Fulton, MD, pp. 75–77.