Integration of Basic Materials Research Into the Design of Cast Components by a Multi-Scale Methodology
Source abstract
Abstract
We present a formal methodology to integrate basic materials research results into a design procedure for engineering components. Although the methodology is generic, we demonstrate its development and application in designing a cast automotive control arm. Specifically, we propose a multi-scale analysis whereby the local mechanisms of deformation are accounted for by an internal state variable constitutive model embedded within a non-linear elastic-plastic finite element analysis. Multiple fundamental materials research approaches at different length scales are utilized to quantify the pertinent deformation mechanisms, such as atomistic simulations, microscopy, micromechanical finite element simulations, and mechanical testing. The current methodology is a step toward a larger goal of interactively integrating basic materials science research into engineering system design. [S0094-4289(00)01903-4]
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, University of Colorado, Boulder, CO 80309
Materials & Engineering Sciences Center, Sandia National Laboratories, Livermore, CA 94550
References (29)
Show source-provided references
1. Raj, R., Enright, M. P., and Frangopol, D. M., 2000, “A System Level Approach for Analyzing the Origins of Variability in Life Prediction of Tungsten Filaments for Incandescent Lamps,” Mater. Des., 21, pp. 9–18.10.1016/S0261-3069(99)00045-X ↗
2. Subbarayan, G., and Raj, R., 1999, “A Methodology for Integrating Materials Science with System Engineering,” Mater. Des., 20, pp. 1–20.10.1016/S0261-3069(98)00048-X ↗
3. Olson, G. B. , 1997, “Computational Design of Hierarchically Structured Materials,” Science, 277, pp. 1237–1242.10.1126/science.277.5330.1237 ↗
4. Kearney, A., and Rooy, E. L., 1995, “Aluminum Foundary Products,” ASM Handbook, Properties and Selection: Nonferrous Alloys and Special Purpose Materials, Vol. 2, ASM International, pp. 123–151.10.31399/asm.hb.v02.a0001061 ↗
5. Daw, M. S., and Baskes, M. I., 1984, “Embedded-atom Method: Derivation and Application to Impurities and Other Defects in Metals,” Phys. Rev. B, 29, pp. 6443–6453.10.1103/PhysRevB.29.6443 ↗
6. Baskes, M. I. , 1992, “Modified Embedded-Atom Potentials for Cubic Materials and Impurities,” Phys. Rev. B, 46, pp. 2727–2742.10.1103/PhysRevB.46.2727 ↗
7. Gall, K., Horstemeyer, M. F., Baskes, M. I., and Van Schilfgaarde, M., 2000, “Atomistic Simulations on the Tensile Debonding of an Aluminum-Silicon Interface,” J. Mech. Phys. Solids, in press.10.1016/S0022-5096(99)00086-1 ↗
8. Needleman, A. , 1987, “A Continuum Model for Void Nucleation by Inclusion Debonding,” ASME J. Appl. Mech., 54, pp. 525–531.10.1115/1.3173064 ↗
9. Needleman, A. , 1990, “An Analysis of Tensile Decohesion Along an Interface,” J. Mech. Phys. Solids, 38, pp. 289–324.10.1016/0022-5096(90)90001-K ↗
10. Tvergaard, V., and Hutchinson, J. W., 1992, “The Relation Between Crack Growth Resistance and Fracture Process Parameters in Elastic-Plastic Solids,” J. Mech. Phys. Solids, 40, pp. 1377–1397.10.1016/0022-5096(92)90020-3 ↗
11. Garrison, W. M., and Moody, N. R., 1987, “Ductile Fracture,” J. Phys. Chem. Solids, 48, pp. 1035–1074.10.1016/0022-3697(87)90118-1 ↗
12. Gokhale, A. M., Dighe, M. D., and Horstemeyer, M. F., 1998, “Effect of Temperature on Silicon Particle Damage in A356 Alloy,” Metall. Mater. Trans. A, 29A, pp. 905–907.10.1007/s11661-998-0281-0 ↗
13. Horstemeyer, M. F., Lathrop, J. L., Gokhale, A. M., and Dighe, M. D., 2000, “Modeling Stress State Dependent Damage Evolution in a Cast Al-Si-Mg Aluminum Alloy,” Theor. Appl. Mech., in press.10.1016/S0167-8442(99)00049-X ↗
14. Horstemeyer, M. F., and Gokhale, A. M., 2000, “A Void-Crack Nucleation Model for Ductile Metals,” Int. J. Solids Struct., in press.10.1016/S0020-7683(98)00239-X ↗
15. Horstemeyer, M. F., and Mosher, D. A., 1999, “Strain Rate and Temperature Dependent Plasticity-Damage Evolution,” Proc. of Plasticity 99: Constitutive and Damage Modeling of Inelastic Deformation and Phase Transformation, The 7th Int. Symp. On Plasticity and Its Current Applications, Khan, A. S., ed., pp. 651–654.
16. Dighe, M. D., Gokhale, A. M., Horstemeyer, M. F., and Mosher, D. A., 2000, “Observations of Strain Rate Effects on Damage Evolution in a Cast Al-Si-Mg Base Alloy,” Acta Metall., in press.10.1007/s11661-998-0331-7 ↗
17. Gall, K., Horstemeyer, M. F., McDowell, D. L., and Fan, J., 2000, “Finite Element Analysis of The Debonding and Fracture Characteristics of Si Particle Clusters in Cast Al-Si Alloys Subjected to Cyclic Loading Conditions,” Mech. Mater., in press.10.1016/S0167-6636(00)00003-X ↗
18. Gall, K., Horstemeyer, M. F., McDowell, D. L., and Fan, J., 2000, “On the Driving Force for Fatigue Crack Formation from Inclusions and Voids,” Int. J. Fract., in press.
19. Gall, K., Yang, N., Horstemeyer, M. F., McDowell, D. L., and Fan, J., 1999, “The Debonding and Fracture of Si Particles During the Fatigue of a Cast Al-Si Alloy,” Metall. Trans. A, 30A, pp. 3079–3088.10.1007/s11661-999-0218-2 ↗
20. Samuel, A. M., and Samuel, F. H., 1995, “A Metallographic Study of Porosity and Fracture Behavior in Relation to the Tensile Properties in 319.2 End Chill Castings,” Metall. Trans., 26A, pp. 2359–2372.10.1007/BF02671250 ↗
21. Cocks, A. C. F., and Ashby, M. F., 1980, “Intergranular Fracture During Power Law Creep Under Multiaxial Stresses,” J. Metal Sci., 14, pp. 395–402.10.1179/030634580790441187 ↗
22. McClintock, F. A. , 1968, “A Criterion for Ductile Fracture by the Growth of Holes,” ASME J. Appl. Mech., 35, p. 363363.10.1115/1.3601204 ↗
23. Horstemeyer, M. F., and Ramaswamy, S., 2000, “On Factors Affecting Localization and Void Growth in Ductile Metals: A Parametric Study,” Int. J. Damage Mech., in press.10.1177/105678950000900102 ↗
24. Horstemeyer, M. F., Matalanis, M. M., Sieber, A. M., and Botos, M. L., 2000, “Micromechanical Finite Element Calculations of Temperature and Void Configuration Effects on Void Growth and Coalescence,” Int. J. Plast., in press.10.1016/S0749-6419(99)00076-5 ↗
25. Bammann, D. J., Chiesa, M. L., Horstemeyer, M. F., and Weingarten, L. I., 1993, “Failure in Ductile Materials Using Finite Element Methods,” Structural Crashworthiness and Failure, Wierzbicki, T., and Jones, N., eds., Elsevier Applied Science, The Universities Press (Belfast) Ltd.
26. Bammann, D. J., Chiesa, M. L., and Johnson, G. C., 1995, “A State Variable Model for Temperature and Strain Rate Dependent Metals,” Rajendran, A. M., and Batra, R. C., eds., Constitutive Laws: Experiments and Numerical Implementation.
27. Kachanov, M. L. , 1958, “Time of the Fractured Process Under Creep Conditions,” Izv. Akad. Nauk. SSSR OTN Tekh. Nauk., 8, p. 2626.
28. Rabotnov, Y. N., 1969, Creep Problems in Structural Members, North-Holland, Amsterdam.
29. Budiansky, B. J., Hutchinson, J. W., and Slutsky, S., 1982, “Void Growth and Collapse in Viscous Solids,” Mechanics of Solids: The Rodney Hill 60th Anniversary Volume, Hopkins, H. G., and Sewell, M. J., eds., Pergamon Press, Oxford, pp. 13–45.10.1016/B978-0-08-025443-2.50009-4 ↗