journal article·1998-10-01

Mechanistic Prediction of Fracture Processes in Ferritic Steel Welds Within the Transition Temperature Regime

E. P. Busso, Y. Lei, N. P. O’Dowd, G. A. Webster

Publisher page

Abstract

This work examines the fracture behavior of ferritic steel welds in the transition temperature regime, where failure can occur either by ductile tearing or cleavage fracture. A computational and probabilistic-based mechanistic approach to cleavage fracture and ductile crack growth is adopted to model the fracture processes. The softening effect of ductile damage close to the crack tip is described by a Gurson-type material model. A statistical approach linked to both the Weibull stress and the initial void volume fraction is employed to determine the probability of cleavage fracture and the coupling between both fracture mechanisms. Finite element results are relied upon to interpret experimental fracture toughness data for the welds and to examine the effects of near crack tip damage and crack growth on the cleavage failure probabilities and cleavage and ductile fracture toughness distributions. The scatter in the weld experimental fracture toughness data is well reproduced by the proposed cleavage and ductile tearing models.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Imperial College, London SW7 2BX, United Kingdom

References (26)

Show source-provided references
1. ABAQUS V. 5.5, 1996, Hibbitt, Karlsson and Sorensen Inc., Providence, RI.
2. ASTM Standard E 1737-96, 1996, “Standard Test Method for J-Integral Characterisation of Fracture Toughness,” Research Report RR E24-1011 from ASTM Committee on Fatigue and Fracture, USA.
3. Beremin F. M. , 1983, “A Local Criterion for Cleavage Fracture of a Nuclear Pressure Vessel Steel,” Metall. Trans. A, Vol. 14 p.22772277.10.1007/BF02663302 ↗
4. Doig, P., and Moskovic, R., 1990, “The Influence of Competing Fracture Modes on Ductile to Brittle Transition Temperature,” Nuclear Electric Report TD/SIP/REP/2034.
5. Faleskog, J., Gao, X., and Shih, C. F. 1998, “Cell Model for Non-linear Fracture Analysis—I. Micromechanics Calibration,” Int. J. Fract., in press.
6. Gurson A. L. , 1977, “Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media,”ASME JOURNAL OF ENGINEERING AND MATERIALS TECHNOLOGY, Vol. 99 p. 22.10.1115/1.3443401 ↗
7. Knott, J. F., 1997, “Recent Advances in the Micro-modeling of Cleavage Fracture in Steel,” Proc. G. R. Irwin Symposium on Cleavage Fracture, K. S.Chan, ed., The Minerals, Metals and Mat. Soc, USA, p. 171.
8. Landes, D., and Shaffer, D. H., 1980, “Statistical Characterisation of Fracture in the Transition Region,” ASTM STP 700, 368.10.1520/STP36981S ↗
9. Lei, Y., O’Dowd, N. P., Busso, E. P., and Webster, G., 1998, “Weibull Stress Solutions for Cracks in Elastic and Elastic-Plastic Materials,” Int. Journal of Fracture, in press.
10. Lidbury, D. P. G., Sherry, A. H., Beardsmore, D., Howard, I. C., Li, Z. H., and Sheikh, M. A., 1996, “Application of Local Approach to Predict Cleavage and Ductile Fracture,” Proc. of TAGSI Symposium, Advances in Fracture Mechanics, Abington Cambridge, UK, Jan.
11. McMahon C. J. , and CohenM., 1965, Acta Met., Vol.13, p. 591591.10.1016/0001-6160(65)90121-5 ↗
12. Minami F. , Bruckner-FoitA., MunzD., and TrolidenierB., 1992, “Estimation Procedure for the Weibull Parameters Used in the Local Approach,” Int. J. Fracture, Vol.54, p. 197197.10.1007/BF00035355 ↗
13. Moskovic, R., 1997, Magnox Electric plc (UK). Personal communication.
14. Moskovic R. , and NealeB. K., 1993, “Treatment of Fracture Toughness Data in the Transition Regime,” Fatigue Fract. Engng. Mater. Struct., Vol. 16, p. 11751175.10.1111/j.1460-2695.1993.tb00732.x ↗
15. Reed P. A. , and KnottJ. P., 1992, “An investigation of the Warm Pre-stressing Effect in A533B Weld Metals,” Fatigue and Fract. Engng. Mat. Struct., Vol. 19, p. 485485.10.1111/j.1460-2695.1992.tb01261.x ↗
16. Ritchie R. O. , KnottJ., and RiceJ. R., 1973, J. Mech. Physics Sol., Vol. 21, p. 395395.
17. Ruggieri, C., and Dodds, R. H., 1995, “Constraint and Ductile Tearing Effects in Statistical Analyses of Cleavage Fracture,” University of Illinois Report UILU-ENG-95-2011, Oct.
18. Sanderson, D. J., Sherry, A. H., Beardsmore, D. W., Howard, I. C., and Li, Z. H. 1996, “Draft Procedure for the Use of Local Approach to Predict the Cleavage and Ductile Fracture Behaviour of Steels,” Oct.
19. Tvergaard V. , 1990, “Material Failure by Void Growth to Coalescence,” Advances in Applied Mechanics, Vol. 27, p. 8383.10.1016/S0065-2156(08)70195-9 ↗
20. Tweed J. W. and KnottJ. F., 1987, “Micromechanisms of Failure in C-Mn Weld Metals,” Acta Metall. Mat., Vol. 35, p.14011401.10.1016/0001-6160(87)90087-3 ↗
21. Wallin, K., 1993, “Statistical Aspects of Constraint with Emphasis on Testing and Analysis of Specimens in the Transition Region,” in Constraint Effects in Fracture, ASTM STP1171, Hankett et al eds., p. 264.10.1520/STP18032S ↗
22. Weibull W. , 1939, “The Phenomenon of Rupture in Solids,” Ingeniors Vetenskapes Akademien, Handlingar, Vol. 153, p. 5555.
23. Windle P. L. , and MoskovicR., 1989, “The Analysis of Mode I In-Plane Toughness Data for Mild Steel Plate and Weld Metal. Part I: Analytic Methodology,” Int. J. Pres. Ves. & Piping, Vol. 40, p. 4141.10.1016/0308-0161(89)90123-3 ↗
24. Windle P. L. , and MoskovicR., 1989b, “The Analysis of Mode I In-Plane Toughness Data for Mild Steel Plate and Weld Metal. Part I: The Data and the Analysis,” Int. J. Pres. Ves. & Piping, Vol. 40, p. 107107.10.1016/0308-0161(89)90071-9 ↗
25. Xia L. , and ShihC. F., 1995, “Ductile Crack Growth I: A Numerical Study Using Computational Cells with Microstructurally-Based Length Scales,” J. Mech. Phys. Sol., Vol. 43, p. 233233.10.1016/0022-5096(94)00064-C ↗
26. Xia L. , and ShihC. F., 1996, “Ductile Crack Growth III: Transition to Cleavage Fracture,” J. Mech. Phys. Sol., Vol. 44, p. 603603.10.1016/0022-5096(95)00086-0 ↗