Cyclic Deformation and Anisotropic Constitutive Relations of Al-6061-T6 Under Biaxial Loading
Source abstract
Abstract
Anisotropic cyclic stress-strain curves (CSSCs) were obtained from fully reversed cyclic tests in controlled strain on two orientations of specimens made from an Al-6061-T6 plate (along the rolling direction and perpendicular to the rolling direction). The experiments were conducted at room temperature under three loading conditions: tension/compression, pure torsion and combined tension/torsion in-phase. Based on the CSSCs data, the anisotropic constitutive relations of the material were obtained using Hill’s anisotropic plasticity theory. The coefficients in the yield function were evaluated with a 0.2 percent effective plastic strain criterion. Yield loci and flow behavior were determined for tension/torsion biaxial loading and compared to theoretical predictions. Two anisotropic effective stress-effective strain criteria obtained from the anisotropic constitutive relations were evaluated. A Von Mises type criterion correlated very well with the test data of all specimens under all loadings. The Tresca type criterion did not correlate with the test data.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering Department, Northeastern University, Boston, MA 02115
Department of Material Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
References
Reference metadata was not supplied for this record.