On the Mechanical Response in a Thermal Barrier System Due to Martensitic Phase Transformation in the Bond Coat
Source abstract
Abstract
Recent studies have shown that Pt-aluminide—a common bond coat material in thermal barrier coatings—undergoes martensitic transformations during thermal cycling. The transformations are associated with both large transformation strain and a strain hysteresis, leading to accumulation of a mismatch strain. Thermal barrier systems based on Pt-aluminide bond coats are susceptible to interfacial morphological instabilities. In this study, we investigate how the cyclic martensitic transformation influences the morphology. Two key results are: (i) the morphological instabilities are highly sensitive to the thermo-mechanical properties of the substrate due to the martensitic transformation; (ii) the hysteresis associated with cyclic martensitic transformation cannot drive the morphological instabilities; the strains associated with the formation of the thermally grown oxide do.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, University of Delaware, Newark, DE 19716
References (21)
Show source-provided references
1. Miller, R. A. , 1984, “Oxidation-Based Model for Thermal Barrier Coating Life,” J. Am. Ceram. Soc., 67, pp. 517–521.10.1111/j.1151-2916.1984.tb19162.x ↗
2. Strangman, T. E. , 1985, “Thermal Barrier Coatings for Turbine Airfoils,” Thin Solid Films, 127, pp. 93–105.10.1016/0040-6090(85)90215-9 ↗
3. DeMasi-Marcin, J. T., and Gupta, D. K., 1994, “Protective Coatings in the Gas-Turbine Engine,” Surf. Coat. Technol., 68/69, pp. 1–9.10.1016/0257-8972(94)90129-5 ↗
4. Wright, P. K., and Evans, A. G., 1999, “Mechanisms Governing the Performance of Thermal Barrier Coatings,” Curr. Opin. Solid State Mater. Sci., 4, pp. 255–265.10.1016/S1359-0286(99)00024-8 ↗
5. Johnson, C. A., Ruud, J. A., Bruce, R., and Wortman, D., 1998, “Relationships Between Residual Stress, Microstructure and Mechanical Properties of Electron Beam Physical Vapor Deposition Thermal Barrier Coatings,” Surf. Coat. Technol., 109, pp. 80–85.10.1016/S0257-8972(98)00668-9 ↗
6. Gell, M., Vaidyanathan, K., Barber, B., Cheng, J., and Jordan, E., 1999, “Mechanism of Spallation in Platinum Aluminide/Electron Beam Physical Vapor-Deposited Thermal Barrier Coatings,” Metall. Trans. A, 30, pp. 427–435.10.1007/s11661-999-0332-1 ↗
7. Padture, N. P., Gell, M., and Jordan, E. H., 2002, “Thermal Barrier Coatings for Gas-Turbine Engine Applications,” Science, 12, pp. 280–284.10.1126/science.1068609 ↗
8. Ruud, J. A., Bartz, A., Borom, M. P., and Johnson, C. A., 2001, “Strength Degradation and Failure Mechanisms of Electron-Beam Physical-Vapor-Deposited Thermal Barrier Coatings,” J. Am. Ceram. Soc., 84, pp. 1545–1552.10.1111/j.1151-2916.2001.tb00875.x ↗
9. He, M. Y., Evans, A. G., and Hutchinson, J. W., 2000, “The Ratcheting of Compressed Thermally Grown Thin Films on Ductile Substrates,” Acta Mater., 48, pp. 2593–2601.10.1016/S1359-6454(00)00053-7 ↗
10. Karlsson, A. M., and Evans, A. G., 2001, “A Numerical Model for the Cyclic Instability of Thermally Grown Oxides in Thermal Barrier Systems,” Acta Mater., 49, pp. 1793–1804.10.1016/S1359-6454(01)00073-8 ↗
11. Mumm, D. R., Evans, A. G., and Spitsberg, I., 2001, “Characterization of Cyclic Displacement Instability for a Thermally Grown Oxide in a Thermal Barrier System,” Acta Mater., 49, pp. 2329–2340.10.1016/S1359-6454(01)00071-4 ↗
12. Karlsson, A. M., Hutchinson, J. W., and Evans, A. G., 2002, “A Fundamental Model of Cyclic Instabilities in Thermal Barrier Systems,” J. Mech. Phys. Solids, 50, pp. 1565–1589.10.1016/S0022-5096(02)00003-0 ↗
13. Karlsson, A. M., Levi, C. G., and Evans, A. G., 2002, “A Model Study of Displacement Instabilities During Cyclic Oxidation,” Acta Mater., 50, pp. 1263–1273.10.1016/S1359-6454(01)00403-7 ↗
14. Karlsson, A. M., Xu, T., and Evans, A. G., 2002, “The Effect of the Thermal Barrier Coating on the Displacement Instability in Thermal Barrier Systems,” Acta Mater., 50, pp. 1211–1218.10.1016/S1359-6454(01)00422-0 ↗
15. Karlsson, A. M., Hutchinson, J. W., and Evans, A. G., 2003, “The Displacement of the Thermally Grown Oxide in Thermal Barrier Systems Upon Temperature Cycling,” Mater. Sci. Eng., A351, pp. 244–257.10.1016/S0921-5093(02)00843-2 ↗
16. Pennefather, R. C., and Boone, D. H., 1995, “Mechanical Degradation of Coating Systems in High-Temperature Cyclic Oxidation,” Surf. Coat. Technol., 76–77, pp. 47–52.10.1016/02578-9729(50)25510- ↗
17. ABAQUS, Hibbitt, Karlsson and Sorensen Inc, Pawtucket, RI.
18. Pan, D., Chen, M. W., Wright, P. K., and Hemker, K. J., 2003, “Evolution of a Diffusion Aluminide Bond Coat for Thermal Barrier Coatings During Thermal Cycling,” Acta Mater., 51, pp. 2205–2217.10.1016/S1359-6454(03)00014-4 ↗
19. Chen, M. W., Ott, R. T., Hufnage, T. C., Wright, P. K., and Hemker, K. J., 2003, “Microstructural Evolution of Platinum Modified Nickel Aluminide Bond Coat During Thermal Cycling,” Surf. Coat. Technol., 163–164, pp. 25–30.10.1016/S0257-8972(02)00591-1 ↗
20. Zhang, Y., Haynes, J. A., Pint, B. A., Wright, I. G., and Lee, W. Y., 2003, “Martensitic Transformation in NiAl and (Ni,Pt)Al Bond Coatings,” Surf. Coat. Technol., 163–164, pp. 19–24.10.1016/S0257-8972(02)00585-6 ↗
21. Karlsson, A. M., and Evans, A. G., 2003, work in progress.