journal article·1996-01-01

Fluid and Matrix Components of Polyurethane Foam Behavior Under Cyclic Compression

Jackie D. Rehkopf, Greg M. McNeice, G. Wayne Brodland

Publisher page

Abstract

Semi-rigid polyurethane foam specimens were compressed to 25, 50, or 75 percent strain at nominal strain rates of 0.14/s, 1.4/s or 14/s for up to 100 cycles. The loads carried by the fluid and matrix phases of the foam were determined over these deformation histories using an experimental method recently developed by the authors. The fluid phase contributed significantly to the first-cycle stress of specimens compressed to 50 or 75 percent strain. During subsequent cycles, the fluid component decreased more quickly than the matrix component and became negligible by 100 cycles.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer composites and self-healing · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, University of Waterloo, Waterloo, Ontario, Canada, N2L 3G1

References (12)

Show source-provided references
1. Gent A. N. , and ThomasA. G., 1963, “Mechanics of Foamed Elastic Materials,” Rubber Chemistry And Technology, Vol. 36, pp. 597–610.10.5254/1.3539591 ↗
2. Gibson, L. J., and M. F. Ashby, 1988, Cellular Solids. Structure and Properties, Pergamon Press, Toronto.
3. Green S. J. , SchierlohF. L., PerkinsR. D., and BabcockS. G., 1969, “Highvelocity Deformation Properties of Polyurethane Foams,” Experimental Mechanics, Vol. 9, No. 3, pp. 103–109.10.1007/BF02327695 ↗
4. Hager S. L. , and CraigT. A., 1992, “Fatigue Testing of High Performance Flexible Polyurethane Foam,” Journal of Cellular Plastics, Vol. 28, No. 3, pp. 284–303.10.1177/0021955X9202800305 ↗
5. Hilyard N. C. , and KanakkanattS. V., 1970, “Mechanical Damping in Liquid Filled Foams,” Journal of Cellular Plastics, Vol. 6, No. 2, pp. 87–90.10.1177/0021955X7000600204 ↗
6. Hilyard N. C. , 1971, “Observations on the Impact Behaviour of Polyurethane Foams; II. The Effect of Fluid Flow,” Journal of Cellular Plastics, Vol. 7, pp. 84–90.10.1177/0021955X7100700203 ↗
7. Nagy A. , KoW. L., and LindholmU. S., 1974, “Mechanical Behavior of Foamed Materials Under Dynamic Compression,” Journal of Cellular Plastics, Vol. 10, No. 3, pp. 127–134.10.1177/0021955X7401000306 ↗
8. Rehkopf, J. D., 1994, “Fluid and Matrix Components of the Behaviour of a Polyurethane Foam Under Cyclic Compression,” Ph.D. thesis, University of Waterloo.
9. Rehkopf, J. D., G. W. Brodland, and G. M. McNeice, 1995, “Experimentally Separating Fluid and Matrix Contributions to Polymeric Foam Behaviour,” Experimental Mechanics, In press.10.1007/BF02328691 ↗
10. Rusch K. C. , 1970, “Load-Compression Behavior of Brittle Foams,” Journal of Applied Polymer Science, Vol. 14, pp. 1263–1276.10.1002/app.1970.070140514 ↗
11. Throne J. L. , and ProgelhofR. C., 1984, “Closed-cell Foam Behavior Under Dynamic Loading-I. Stress-strain Behavior of Low-density Foams,” Journal of Cellular Plastics, Vol. 20, No. 6, pp. 437–442.10.1177/0021955X8402000607 ↗
12. Throne J. L. , and ProgelhofR. C., 1985, “Closed-cell Foam Behavior Under Dynamic Loading-II. Loading Dynamics of Low-density Foams,” Journal of Cellular Plastics, Vol. 21, No. 2, pp. 43–50.10.1177/0021955X8502100105 ↗