journal article·1998-04-01

An Investigation of Thin-Film Coating/Substrate Systems by Nanoindentation

Jackie Li, Erik T. Thostenson, Tsu-Wei Chou, Laura Riester

Publisher page

Abstract

The indentation load-displacement behavior of three material systems tested with a Berkovich indenter has been examined. The materials studied were the substrate materials—silicon and polycarbonate, and the coating/substrate systems—diamond-like carbon (DLC) coating on silicon, and DLC coating on polycarbonate. They represent three material systems, namely, bulk, soft-coating on hard-substrate, and hard-coating on soft-substrate. Delaminations in the soft-coating/hard-substrate (DLC/Si) system and cracking in the hard-coating/soft-substrate system (DLC/Polycarbonate) were observed. Parallel to the experimental work, an elastic analytical effort has been made to examine the influence of the film thickness and the properties of the coating/substrate systems. Comparisons between the experimental data and analytical solutions of the load-displacement curves during unloading show good agreement. The analytical solution also suggests that the Young’s modulus and hardness of the thin film can not be measured accurately using Sneddon’s solution for bulk materials when the thickness of the film is comparable to the loading contact radius of the indenter. The elastic stress field analysis provides a basis for understanding the experimentally observed delaminations and cracking of the coating/substrate systems.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Center for Composite Materials, and Department of Mechanical Engineering, University of Delaware, Newark, DE 19716

MS 6069, P. O. Box 2008, Oak Ridge National Laboratory, Oak Ridge, TN 37831-6069

References (25)

Show source-provided references
1. Chiu Y. P. , and HartnettM. J., 1983, “A Numerical Solution for Layered Solid Contact Problems with Application to Bearings,” ASME Journal of Lubrication Technology, Vol. 105, pp. 585–590.10.1115/1.3254681 ↗
2. Doerner M. F. , and NixW. D., 1986, “A Method for Interpreting the Data from Depth-Sensing Indentation Instruments,” Journal of Materials Research, Vol. 1, No. 4, pp. 601–609.10.1557/JMR.1986.0601 ↗
3. Evans A. G. , and HutchinsonJ. W., 1984, “On the Mechanics of Delamination and Spalling in Compressed Films,” International Journal of Solids and Structures, Vol. 20, pp. 455–466.10.1016/0020-7683(84)90012-X ↗
4. Evans A. G. , DroryM. D., and HuM. S., 1988, “The Cracking and Decohesion of Thin Film,” Journal of Materials Research, Vol. 3, pp. 1043–1049.10.1557/JMR.1988.1043 ↗
5. Gao H. , and WuT.-W., 1993, “A Note on the Elastic Contact Stifness of a Layered Medium,” Journal of Materials Research, Vol. 8, pp. 3229–3232.10.1557/JMR.1993.3229 ↗
6. Harding J. W. , and SneddonI. N., 1945, “The Elastic Stresses Produced by the Indentation of the Plane Surface of a Semi-Infinite Elastic Solid by a Rigid Punch,” Proc. Camb. Phil. Soc. Vol. 41, pp. 16–26.10.1017/S0305004100022325 ↗
7. Jayachandran, R., Boyce, M. C., and Argon, A. S., 1995, “Mechanics of the Indentation Test and Its Use to Assess the Adhesion of Polymeric Coatings,” Adhesion Measurement of Films and Coatings, K. L., Mittal, ed., VSP, pp. 189–215.10.1515/9783112318966-014 ↗
8. Komvopoulos K. , SakaN., and SuhN. P., 1987, “The Role of Hard Layers in Lubricated and Dry Sliding,” ASME Journal of Tribology, Vol. 109, pp. 223–231.10.1115/1.3261342 ↗
9. Kral E. R. , KomvopoulosK., and BogyD. B., 1995a, “Finite Element Analysis of Repeated Indentation of an Elastic-Plastic Layered Medium by a Rigid Sphere, Part I. Surface Results,” ASME Journal of Applied Mechanics, Vol. 62, pp. 20–28.10.1115/1.2895880 ↗
10. Kral E. R. , KomvopoulosK., and BogyD. B., 1995b, “Finite Element Analysis of Repeated Indentation of an Elastic-Plastic Layered Medium by a Rigid Sphere, Part II. Subsurface Results,” ASME Journal of Applied Mechanics,” Vol. 62, pp. 29–42.10.1115/1.2895881 ↗
11. Lardner T. J. , GiovinazzoR. J., and RitterJ. E., 1992, “The Effect of High Modulus Single and Double Layer Coatings on Contact Stress,” Philosophical Magazine A, Vol. 66, pp. 437–455.10.1080/01418619208201568 ↗
12. Li J. , and ChouT.-W., 1997, “Elastic Field of a Thin-Film/Substrate System Under Axisymmetric Loading,” International Journal of Solids and Structures, Vol. 34, pp. 4463–4478.10.1016/S0020-7683(97)00053-X ↗
13. Marshall D. B. , and EvansA. G., 1984, “Measurement of Adherence of Residueally Stressed Thin Films by Indentation. I. Mechanics of Interface Delamination,” Journal of Applied Physics, Vol. 56, pp. 2632–2638.10.1063/1.333794 ↗
14. Mattewson M. J. , 1986, “Adhesion Measurement of Thin Films by Indentation,” Applied Physics Letter, Vol. 49, pp. 1426–1428.10.1063/1.97343 ↗
15. Oliver, W. C., and Hutchings, R., and Pethica, J. B., 1989, “Measurement of Hardness at Indentation Depths as Low as 20 nanometres,” Microindentation Techniques in Material Science and Engineering, ASTM STP, Vol. 889, pp. 90–108.10.1520/STP32953S ↗
16. Oliver, W. C., and Pethica, J. B., 1989, “Method for Continuous Determination of the Elastic Stiffness of Contact Between Two Bodies,” U.S. Patent No. 4,848,141.
17. Oliver W. C. , and PharrG. M., 1992, “An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments,” Journal of Materials Research, Vol. 7, No. 6, pp. 1564–1583.10.1557/JMR.1992.1564 ↗
18. O’Sullivan T. C. , and KingR. B., 1988, “Sliding Contact Stress Field Due to a Spherical Indenter on a Layered Elastic Half-Space,” ASME Journal of Tribology, Vol. 110, pp. 235–240.10.1115/1.3261591 ↗
19. Pethica, J. B., and Oliver, W. C., 1989, MRS Symposium Procceedings, Vol. 130, 13–23.10.1557/PROC-130-13 ↗
20. Ritter J. E. , LardnerT. J., RosenfeldL., and LinM. R., 1989, “Measurement of Adhesion of Thin Polymer Coatings by Indentation,” Journal of Applied Physics, Vol. 66, No. 8, pp. 3626–3634.10.1063/1.344071 ↗
21. Rossington C. , EvansA. G., MarshallD. B., and Khuri-YakubB. T., 1984, “Measurement of Adherence of Residueally Stressed Thin Films by Indentation. II. Experiments with ZnO/Si,” Journal of Applied Physics, Vol. 56, 2639–2644.10.1063/1.333795 ↗
22. Sneddon, I. N., 1951, Fourier Transforms, McGraw-Hill, New York.
23. Stone D. , LaFontaineW. R., AlexopoulosP., WuT. W., and LiC.-Y., 1988, “An Investigation of Hardness and Adhesion of Sputter-Deposited Aluminum on Silicon by Utilizing a Continuous Indentation Test,” Journal of Materials Research, Vol. 3, pp. 141–147.10.1557/JMR.1988.0141 ↗
24. Van der Zwaag S. , and FieldJ. E., 1982, “The Effect of Thin Hard Coatings on the Hertzian Stress Field,” Philosophical Magazine A, Vol. 46, pp. 133–150.10.1080/01418618208236213 ↗
25. Van der Zwaag S. , DearJ. P., and FieldJ. E., 1986, “The Effect of Double Layer Coatings of High Modulus on Contact Stresses,” Philosophical Magazine A, Vol. 53, pp. 101–111.10.1080/01418618608242810 ↗