journal article·2005-07-01

Determination of Precise Indentation Flow Properties of Metallic Materials Through Analyzing Contact Characteristics Beneath Indenter

Sung-Hoon Kim, Min-Kyung Baik, Dongil Kwon

Publisher page

Abstract

The continuous indentation technique is widely used for nondestructive evaluation of the mechanical properties of devices and materials. In particular, flow properties can be obtained by using this technique with a spherical indenter. Several formulas have been suggested to determine flow properties, and they commonly require the determination of the precise contact characteristics such as the contact area or depth between material and indenter to obtain the properties accurately. In this study, contact characteristics were determined by analysis of the contact morphology from FEA (finite element analysis) using mechanical property data for several steels. The contact characteristics obtained from FE simulation were compared to an analysis of the parameters of indentation load-depth curves for the steels. The contact characteristics were shown as functions of such parameters as work-hardening exponent and indentation depth. In addition, using indentation morphology from FE simulation, the flow properties were evaluated by analysis of indentation morphology for 18 materials on the basis of the two representative preexisting definitions of stress and strain, and the definitions were verified by comparison of the flow properties with tension testing data.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Adhesion, Friction, and Surface Interactions · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Seoul National University, Seoul, 151-742, Korea

References (19)

Show source-provided references
1. Ahn, J.-H., and Kwon, D., 2001, “Derivation of plastic stress-strain relationship from ball indentation: Examination of strain definition and pileup effect,” J. Mater. Res., 16, pp. 3170–3178.10.1557/JMR.2001.0437 ↗
2. Haggag, F. M., 1993, “In-situ measurements of mechanical properties using novel automated ball indentation system,” ASTM STP 1204, Philadelphia, pp. 27–44.10.1520/STP12719S ↗
3. Suresh, S., and Giannakopoulos, A. E., 1998, “A new method for estimating residual stresses by instrumented sharp indentation,” Acta Mater., 46(16), pp. 5755–5767.10.1016/S1359-6454(98)00226-2 ↗
4. Lee, Y.-H., and Kwon, D., 2002, “Residual stresses in DLC/Si and Au/Si systems: application of a stress-relaxation model to the nanoindentation technique,” J. Mater. Res., 17(4), pp. 901–906.10.1557/JMR.2002.0131 ↗
5. Malzbender, J., and de With, G., 2000, “Energy dissipation, fracture toughness and the indentation load-displacement curve of coated materials,” Surf. Technol., 135, pp. 60–68.10.1016/S0257-8972(00)00906-3 ↗
6. Murty, K. L., Mathew, M. D., Wang, Y., Shah, V. N., and Haggag, F. M., 1998, “Nondestructive determination of tensile properties and fracture toughness of cold worked A36 steel,” Int. J. Pressure Vessels Piping, 75(11), pp. 831–840.10.1016/S0308-0161(98)00093-3 ↗
7. Asif, S. A. S., Wahl, K. J., and Colton, R. J., 1999, “Nanoindentation and contact stiffness measurement using force modulation with a capacitive load-displacement transducer,” Rev. Sci. Instrum., 70(3), pp. 2408–2413.10.1063/1.1149769 ↗
8. Lucas, B. N., Oliver, W. C., and Swindeman, J. E., 1998, “The dynamics of frequency-specific, depth-sensing indentation testing,” in Fundamentals of Nanoindentation and Nanotribology, N. R. Moody et al., eds., MRS, Warrendale, PA, Vol. 522, pp. 3–14.10.1557/PROC-522-3 ↗
9. Oliver, W. C., and Pharr, G. M., 1992, “An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” J. Mater. Res., 7(6), pp. 1564–1583.10.1557/JMR.1992.1564 ↗
10. Doerner, M. F., and Nix, W. D., 1986, “A method for interpreting the data from depth-sensing indentation instruments,” J. Mater. Res., 1(4), pp. 601–616.10.1557/JMR.1986.0601 ↗
11. Tabor, D., 1951, Hardness of Metals, Clarendon Press, Oxford, p. 2.
12. Jeon, E.-c., Park, J.-S., and Kwon, D., 2003, “Statistical Analysis of Experimental Parameters in Continuous Indentation Tests Using Taguchi Method,” ASME J. Eng. Mater. Technol., 125, pp. 406–411.10.1115/1.1605115 ↗
13. Francis, H. A., 1976, “Phenomenological Analysis of Plastic Spherical Indentations,” Trans. ASME, July, pp. 272–281.10.1115/1.3443378 ↗
14. Taljat, B., and Pharr, G. M., 1998, “Pile-up behavior of spherical indentations in engineering materials,” Mater. Res. Soc. Symp. Proc., 522, pp. 33–38.10.1557/PROC-522-33 ↗
15. Rhee, S. S., and McClintock, F. A., 1962, “On the effect of strain hardening on strain concentrations,” Proc. 4th US Nat. Conf. Applied Mechanics, ASME, Berkeley, CA.
16. Norbury, A. L., and Samuel, T., 1928, “The recovery and sinking-in or piling-up of material in the brinell test, and the effects of these factors on the correlation of the brinell with certain other hardness tests,” J. Iron Steel Inst., London, 117, pp. 673–687.
17. Matthews, J. R. , 1980, “Indentation hardness and hot pressing,” Acta Metall., 28, pp. 311–318.10.1016/0001-6160(80)90166-2 ↗
18. Hill, R., Storkers, B., and Zdunek, A. B., 1989, “A theoretical study of the Brinell hardness test,” Proc. R. Soc. London, Ser. A, 23, pp. 301–330.10.1098/rspa.1989.0056 ↗
19. Cheng, Y. T., and Cheng, C. M., 1998, “Effect of sinking in and piling up on estimating the contact area under load in indentation,” Philos. Mag. Lett., 78, pp. 115–120.10.1080/095008398178093 ↗