journal article·2008-10-01

Orientation and Path Dependence of Formability in the Stress- and the Extended Stress-Based Forming Limit Curves

C. Hari Manoj Simha, Kaan Inal, Michael J. Worswick

Publisher page

Abstract

This article analyzes the formability data sets for aluminum killed steel (Laukonis, J. V., and Ghosh, A. K., 1978, “Effects of Strain Path Changes on the Formability of Sheet Metals,” Metall. Trans. A., 9, pp. 1849–1856), for Al 2008-T4 (Graf, A., and Hosford, W., 1993, “Effect of Changing Strain Paths on Forming Limit Diagrams of Al 2008-T4,” Metall. Trans. A, 24A, pp. 2503–2512) and for Al 6111-T4 (Graf, A., and Hosford, W., 1994, “The Influence of Strain-Path Changes on Forming Limit Diagrams of Al 6111 T4,” Int. J. Mech. Sci., 36, pp. 897–910). These articles present strain-based forming limit curves (ϵFLCs) for both as-received and prestrained sheets. Using phenomenological yield functions, and assuming isotropic hardening, the ϵFLCs are transformed into principal stress space to obtain stress-based forming limit curves (σFLCs) and the principal stresses are transformed into effective stress and mean stress space to obtain the extended stress-based forming limit curves (XSFLCs). A definition of path dependence for the σFLC and XSFLC is proposed and used to classify the obtained limit curves as path dependent or independent. The path dependence of forming limit stresses is observed for some of the prestrain paths. Based on the results, a novel criterion that, with a knowledge of the forming limit stresses of the as-received material, can be used to predict whether the limit stresses are path dependent or independent for a given prestrain path is proposed. The results also suggest that kinematic hardening and transient hardening effects may explain the path dependence observed in some of the prestrain paths.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON, N2L 3G1, Canada

References (28)

Show source-provided references
1. Plastic Instability and Fracture in Sheets Stretched Over Rigid Punches
2. Effect of Changing Strain Paths on Forming Limit Diagrams of Al 2008-T410.1007/BF02646529 ↗
3. Effects of Strain Path Changes on the Formability of Sheet Metals10.1007/BF02663419 ↗
4. The Influence of Strain-Path Changes on Forming Limit Diagrams of Al 6111 T410.1016/0020-7403(94)90053-1 ↗
5. Determination and Use of the Forming Limit Stress Diagrams in Sheet Metal Forming10.1016/0924-0136(95)01960-M ↗
6. Sheet Metal Forming Limits for Complex Strain Paths10.1016/0378-3804(84)90048-2 ↗
7. Failure Maps Applied to Metal Deformation Processes10.1016/B978-0-08-022136-6.50014-7 ↗
8. A General Forming Limit Criterion for Sheet Metal Forming10.1016/S0020-7403(98)00113-1 ↗
9. Stress-Based Forming Limits in Sheet-Metal Forming10.1115/1.1398083 ↗
10. Effect of Yield Criterion on Numerical Simulation Results Using a Stress-Based Failure Criterion10.1115/1.2204951 ↗
11. Review of Theoretical Models of the Strain-Based FLD and Their Relevance to the Stress-Based FLD10.1016/j.ijplas.2003.11.004 ↗
12. Path Dependence of the Forming Limit Stresses in a Sheet Metal10.1016/j.ijplas.2006.05.005 ↗
13. Prediction of Forming Limit Diagrams With Mixed Anisotropic Kinematic-Isotropic Hardening Plastic Constitutive Model Based on Stress Criteria10.1016/S0924-0136(02)01006-3 ↗
14. On Forming Limit Stress Diagram Analysis10.1016/j.ijsolstr.2004.09.010 ↗
15. Limit Strains in the Processes of Stretch-Forming Sheet Metal10.1016/0020-7403(67)90066-5 ↗
16. Sheet Metal Formability Analysis for Anisotropic Materials Under Non-Proportional Loading10.1016/j.ijmecsci.2005.06.005 ↗
17. Prediction of Necking in Tubular Hydroforming Using an Extended Stress-Based FLC10.1115/1.2400269 ↗
18. Simha, C. H. M., Grantab, R., and Worswick, M. J., 2007, “Application of an Extended Stress-Based Forming Limit Curve to Predict Necking in Stretch Flange Forming,” ASME J. Manuf. Sci. Eng.1087-1357, in press.10.1115/1.2844593 ↗
19. Forming Limit Stresses of Sheet Metal Under Proportional and Combined Loadings10.1063/1.2011266 ↗
20. Computational Analysis of Stress-Based Forming Limits10.1016/j.ijsolstr.2007.07.001 ↗
21. Plastic Behavior and Stretchability of Sheet Metals 1. A Yield Function for Orthotropic Sheets Under Plane-Stress Conditions10.1016/0749-6419(89)90019-3 ↗
22. Generalized Isotropic Yield Criterion10.1115/1.3422732 ↗
23. A General Anisotropic Yield Criterion Using Bounds and a Transformation Weighting Tensor10.1016/0022-5096(93)90073-O ↗
24. Prediction of Localized Thinning in Sheet Metal Using a General Anisotropic Yield Criterion10.1016/S0749-6419(99)00091-1 ↗
25. On the Characteristics of Tubular Materials for Hydroforming Experimentation and Analysis10.1016/S0890-6955(00)00070-5 ↗
26. Characterization and Modeling of the Mechanical Behavior and Formability of a 2008-T4 Sheet Sample10.1016/0020-7403(89)90104-5 ↗
27. Khan
28. Springback Evaluation of Automotive Sheets Based on Isotropic-Kinematic Hardening Laws and Non-Quadratic Anisotropic Yield Functions: Part II: Characterization of Material Properties