journal article·2002-10-01

Development of Shape Memory TiNi Fiber Reinforced Epoxy Matrix Composite and Its Properties

Akira Shimamoto, Jai-Sug Hawong, Hyo-Jae Lee

Publisher page

Abstract

Shape memory alloy TiNi fiber epoxy resin composite (SMA-FEC) was developed and the active reinforcement effect of the material was investigated by strain gauge measurement and photoelastic method. In this paper material processing of the SMA-FEC and mechanical testing results are described. The recovery stress-strain at various ambient temperatures by means of strain gauges are reported. A typical shrinkage of the SMA-FEC was recognized with increasing temperature above the inverse transformation temperature Af of embedded SMA TiNi fiber, and it depended on the fiber volume fraction Vf as well as prestrain value. The validity of the composite using the photoelastic model was discussed in detail. By adjusting the fiber volume fraction and prestrain, one can obtain expected elastic modulus and stress fringes value to conduct photoelastic experiment with SMA-FEC as model material. The active reinforcement of the SMA-FEC smart composite was reconfirmed visually from the change of the photoelastic fringe patterns of the specimen by heating at various temperatures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Saitama Institute of Technology, 1690 Fusaiji Okabe, Saitama, 369-0293 Japan

School of Engineering Mechanics, Yeungnam University, 213-1 Daedong, Kyungsan, Kyungbuk, 712-749 Korea

References (9)

Show source-provided references
1. Rogers, C. A., Barker, D. K., and Jaeger, C. A., 1989, Smart Materials, Structures, and Mathematical Issues, Rogers, C. A. eds., Technomic Publishing, PA, pp. 17-28.
2. Shimamoto, A., and Taya, M., 1997, “Reduction in K1 by Shape Memory Effect in a TiNi Shape-Memory Fiber-Reinforced Epoxy Matrix Composite,” Trans. Jpn. Soc. Mech. Eng., Ser. A, 63-65, pp. 26-31.10.1299/kikaia.63.26 ↗
3. Shimamoto, A., Furuya, Y., and Taya, M., 1999, “Reduction in K1 by Shape Memory Effect in a TiNi Shape-Memory Fiber-Reinforced Epoxy matrix Composite (Dependency of Stress Intensity Factor on Crack-tip Domain Size),” Trans. Jpn. Soc. Mech. Eng., Ser. A, 65 (634), pp. 1282-1285.10.1299/kikaia.65.1282 ↗
4. Hawong, Jai-Sug, Shimamoto, A., Takahashi, S., and Choi, Sun-ho, 1990, “Study on the Development of Photo-elastic Experimental Composite Material Development of Orthotropic Material,” JSME Int. J., Ser. I, 33, pp. 89-95.10.1299/jsmea1988.33.1_89 ↗
5. Nishida, M. and Wayman, C. M., 1984, “Electron Microscopy Studies of the All Round Shape Memory Effect in a Ti-51.0 at. % Ni alloy,” Scr. Metall., 18, pp. 1389-1394.10.1016/0036-9748(84)90371-5 ↗
6. Hawong, J. S., Shimamoto, A., Takahashi, S., and Choi, Sun-ho, 1990, “A Method of Measuring Physical Properties from Stress Fringe Values,” JSME Int. J., Ser. I, 33, pp. 497-5.10.1299/jsmea1988.33.4_497 ↗
7. Sampson, R. C. , 1980, “A Stress-Optic Law or Photoelastic Analysis of Orthotropic Composites,” Exp. Mech., 1, pp. 210-215.10.1007/BF02324034 ↗
8. Dally, J. W., and Riley, W. F., 1994, Experimental Stress Analysis, McGraw-Hill, New York, pp. 468-475.
9. Shimamoto, A., Furuya, Y., and Taya, M., 1999, “Mechanical Strength of Shape Memory TiNi Fiber Reinforced Epoxy Material Composite. 1st Report: Active Control of Crack-tip Stress Concentration,” Proceedings of the 71st JSME Spring Annual Meeting (II), pp. 661-662.