journal article·2003-04-01

Plastic Collapse of Cylinders Under Constrained Conditions

A. Abdul-Latif, K. Nesnas

Publisher page

Abstract

This paper deals with an experimental methodology of the large deformation of cylinders under constrained sides and end conditions. A specific arrangement of two geometrically identical cylinders compressed laterally is studied under different quasi-static strain rates. Several tests are performed using two different structural situations. In the first case, the two cylinders are made from superplastic tin-lead alloy, while in the second case, one cylinder is made from superplastic and the other from steel. Different cylindrical geometries are investigated having the same cross sectional area with different ratios of inner to outer diameter (di/do). The load-deflection curves are recorded and then the energy absorbed per unit volume is determined. The experiments show obviously the remarkable sensitivity of the utilized superplastic to the strain rate in the range of 10−5/s-10−3/s. A two-dimensional finite element simulation is also conducted describing the collapse behavior of these cylindrical geometries in both structural cases under different strain rates. A confrontation with experimental observation shows that the predictions describe fairly well the experiments.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Cellular and Composite Structures · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

ERBEM, Universite´ Paris 8, IUT de Tremblay, 93290 Tremblay-en-France, France

GSM/LASMIS, Universite´ de Technologie de Troyes, B.P. 2060, 10010 Troyes cedex, France

References (30)

Show source-provided references
1. Hermann, G., and Perrone, G., 1972, Dynamic Response of Structures, Pergamon Press.
2. Ezra, A. A., and Fay, R. J. 1970, An Assessment of Energy Absorbing Devices for Prospective Use in Aircraft Impact Situation, Dynamic Response of Structures, G. Hermann and N. Perrone eds., Pergamon Press.
3. Rawlings, B., 1974, “Response of Structures to Dynamic Loads,” Proc. Conf. On Mechanical Properties of Materials at High Rates of Strain, Institute of Physics Conference, pp. 279–298.
4. Johnson, W., and Reid, S. R., 1978, “Metallic Energy Dissipating Systems,” Appl. Mech. Rev., 31, pp. 277–288.
5. Johnson, W., and Reid, S. R., 1986, "Metallic Energy Dissipating Systems," Rev. 31, pp. 277-28810.1007/BF00992823 ↗
6. Appl. Mech. Update 1986, pp. 315-319.
7. Jones, N., 1989, Structural Impact, Cambridge Press, Cambridge, UK.
8. Alghamdi, A. A. A. , 2001, “Collapsible Impact Energy Absorbers: An Overview,” Thin-Walled Struct., 39, pp. 189–213.10.1016/S0263-8231(00)00048-3 ↗
9. Alexander, J. M. , 1960, “An Approximate Analysis of the Collapse of Thin Cylindrical Shells Under Axial Loading,” Q. J. Mech. Appl. Math., 13, pp. 11–16.10.1093/qjmam/13.1.10 ↗
10. Pugsley, A. G., and Macaulay, M., 1960, “The Large Scale Crumpling of Thin Cylindrical Columns,” Q. J. Mech. Appl. Math., 13, pp. 1–9.10.1093/qjmam/13.1.1 ↗
11. Batterman, S. C. , 1968, “Free-Edge Plastic Buckling of Axially Compressed Cylindrical Shell,” ASME J. Appl. Mech., 35, p. 7373.10.1115/1.3601176 ↗
12. Abramowicz, W., and Jones, N., 1986, “Dynamic Progressive Buckling of Circular and Square Tubes,” Int. J. Impact Eng., 4, pp. 243–270.10.1016/0734-743X(86)90017-5 ↗
13. Reid, S. R., Reddy, T. Y., and Gray, M. D., 1986, “Static and Dynamic Axial Crushing of Foam-Filled Sheet Metal Tubes,” Int. J. Mech. Sci., 28, pp. 295–322.10.1016/0020-7403(86)90043-3 ↗
14. Reddy, T. Y., and Al-Hassani, S. T. S., 1993, “Axial Crushing of Wood-Filled Square Metal Tubes,” Int. J. Mech. Sci., 35, pp. 231–246.10.1016/0020-7403(93)90078-9 ↗
15. DeRutz, J. A., and Hodge, J. R., 1963, “Crushing of a Tube between Rigid Plates,” ASME J. Appl. Mech., 30, pp. 391–395.10.1115/1.3636567 ↗
16. Rewood, R. G. , 1964, “Discussion of ref. (DeRutz & Hodge (1963)),” ASME J. Appl. Mech., 31, pp. 357–358.
17. Johnson, W., Reid, S. R., and Reddy, T. Y., 1977, “The Compression of Crossed Layers of Thin Tubes,” Int. J. Mech. Sci., 19, pp. 423–437.10.1016/0020-7403(77)90042-X ↗
18. Reddy, T. Y., and Reid, S. R., 1979, “Lateral Compression of Tubes and Tube-Systems with Side Constraints,” Int. J. Mech. Sci., 21, pp. 187–199.10.1016/0020-7403(79)90023-7 ↗
19. Reid, S. R., Drew, S. L. K., and Carney, J. F., 1983, “Energy Absorbing Capacities of Braced Metal Tubes,” Int. J. Mech. Sci., 25, pp. 649–667.10.1016/0020-7403(83)90074-7 ↗
20. Shim, V. P.-W., and Stronge, W. J., 1986, “Lateral Crushing in Tightly Packed Arrays of Thin-Walled Metal Tubes,” Int. J. Mech. Sci., 28, pp. 709–722.10.1016/0020-7403(86)90014-7 ↗
21. Wu, L., and Carney, III, J. F., 1998, “Experimental Analysis of Collapse Behaviors of Braced Elliptical Tubes under Lateral Compression,” Int. J. Mech. Sci., 40, pp. 761–777.10.1016/S0020-7403(97)00121-5 ↗
22. Al-Hassani, S. T. S., Johnson, W., and Lowe, W. T., 1972, “Characteristics of Inversion Tubes under Axial Loading,” J. Mech. Eng. Sci., 14, pp. 370–381.10.1243/JMES_JOUR_1972_014_046_02 ↗
23. Kinkead, A. N. , 1983, “Analysis for Inversion Load and Energy Absorption of a Circular Tube,” J. Strain Anal., 18, pp. 177–188.10.1243/03093247V183177 ↗
24. Reddy, T. Y. , 1989, “Tube Inversion- an Experiment in Plasticity,” Int. J. Mech. Engng. Educ., 17, pp. 277–292.
25. Reid, S. R. , 1993, “Plastic Deformation Mechanisms in Axially Compressed Metal Tubes Used as Impact Energy Absorbers,” Int. J. Mech. Sci., 35, pp. 1035–1052.10.1016/0020-7403(93)90054-X ↗
26. Abdul-Latif, A. , 2000, “On the Lateral Collapse of an Identical Pair of Cylinders,” Int. J. Solids Struct., 37, pp. 1955–1973.10.1016/S0020-7683(98)00335-7 ↗
27. Nesnas, K., and Abdul-Latif, A., 2001, “Lateral Plastic Collapse of Cylinders: Experiments and Modeling,” Computer Modeling in Engineering and Sciences, 2, pp. 373–388
28. Bellet, M., 1988, “Mode´lisation Nume´rique du Formage Superplastique des To^les,” Ph.D. thesis, Ecole Nationale Supe´rieure des Mines de Paris.
29. Mingwang, F., and Luo, Z. J., 1996, “The Simulation of the Viscoplastic Forming Process by the Finite Element Method,” J. Mater. Process. Technol., 55, pp. 442–447.10.1016/0924-0136(95)02054-3 ↗
30. Al-Naib, T. Y. M., and Duncan, J. L., 1970, “Superplastic Metal Forming,” Int. J. Mech. Sci., 12, pp. 463–477.10.1016/0020-7403(70)90074-3 ↗