Residual Stresses and Fracture Mechanics
Source abstract
Abstract
The first part of the paper discusses two problems in which the role of residual stresses may be treated using the procedures of fracture mechanics. One is the significant degradation of the tensile strength of glass due to the residual stresses produced by surface damage. The other is the effect of surface compressive stresses in inhibiting the detection of surface flaws. The second part of the paper discusses the inverse problem of using fracture mechanics solutions to measure residual stresses. This approach which has only been developed in the past decade leads to an experimental procedure which is easy to implement and is also more versatile than conventional methods.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Optical measurement and interference techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, University of California, Berkeley, CA 94720
References (21)
Show source-provided references
1. Bansal, N. P., and Doremus, R. H., 1986, Handbook of Glass Properties, Academic, Orlando, FL, p. 363.10.1016/B978-0-08-052376-7.50015-1 ↗
2. Cheng W. , and FinnieI., 1985, “A Method for Measurement of Axisymmetric Residual Stresses in Circumferentially Welded Thin-Walled Cylinders,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 106, pp. 181–185.10.1115/1.3225799 ↗
3. Cheng W. , and FinnieI., 1988, “KI Solution for an Edge-Cracked Strip,” Eng. Fracture Mech., Vol. 31, pp. 201–207.10.1016/0013-7944(88)90065-3 ↗
4. Cheng W. , and FinnieI., 1992, “A Prediction on the Strength of Glass Following the Formation of Subsurface Flaws by Scribing,” J. of the American Ceramic Society, Vol. 75, pp. 2565–2572.10.1111/j.1151-2916.1992.tb05612.x ↗
5. Cheng W. , and FinnieI., 1993, “A Comparison of the Strains due to Edge Cracks and Cuts of Finite Width With Applications to Residual Stress Measurement,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 115, pp. 220–226.10.1115/1.2904210 ↗
6. Cheng, W., and Finnie, I., 1994, “An Overview of the Crack Compliance Method for Residual Stress Measurement,” Proceedings of Fourth Int. Conf. on Residual Stresses, pp. 449–458.
7. Cheng W. , FinnieI., and VardarO¨., 1992, “Estimation of Axisymmetric Residual Stresses in a Long Cylinder,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 114, pp. 137–140.10.1115/1.2904152 ↗
8. Cheng W. , FinnieI., GremaudM., RosseletA., and StreitR. D., 1994, “The Compliance Method for Measurement of Near Surface Residual Stresses– Application and Validation for Surface Treatment by Laser and Shot-Peening,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 116, pp. 556–560.10.1115/1.2904328 ↗
9. Ernsberger F. M. , 1960, “Detection of Strength-Impairing Surface Flaws in Glass,” Proc. Royal Soc., Vol. 257A, pp. 213–223.10.1098/rspa.1960.0145 ↗
10. Fett T. , 1987, “Bestimmung von Eigenspannungen mittels bruchmechanischer Beziehungen,” Materialpru¨fung, Vol. 29, pp. 92–94.10.1515/mt-1987-290409 ↗
11. Griffith A. A. , 1921, “The Phenomena of Rupture and Flow in Solids,” Phil. Trans., Vol. 221A, pp. 163–198.10.1098/rsta.1921.0006 ↗
12. Gremaud M. , ChengW., PrimeM. B., and FinnieI., 1994, “The Compliance Method for Measurement of Near Surface Residual Stresses—Analytical Background,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 116, pp. 550–555.10.1115/1.2904327 ↗
13. Kang K. J. , SongJ. H., and EarmmeY. Y., 1989, “A Method for the Measurement of Residual Stresses Using a Fracture Mechanics Approach,” J. of Strain Analysis, Vol. 24, pp. 23–30.10.1243/03093247V241023 ↗
14. McClintock, F. A., and Argon, A. S., 1966, Mechanical Behavior of Materials, Addision-Wesley, Reading, MA, p. 496.
15. Morin C. R. , ShipleyR. J., and WilkinsonJ. A., 1994, “Fractography, NDE, and Fracture Mechanics Applications in Failure Studies,” Materials Characterization, Vol. 33, pp. 255–274.10.1016/1044-5803(94)90047-7 ↗
16. Mould R. E. , 1959, “The Strength and Static Fatigue of Glass,” Glasstechn. Ber., Vol. III, pp. 18–28.
17. Nisitani, H., 1987, Stress Analysis of Notch Problems, Mechanics of Fracture Vol. 5, G. C. Sih ed., Noordhoff Int. Publishing.
18. Prime, M. B., 1994, “Residual Stress Measurement in Layered Media,” Ph.D. dissertation in Mechanical Eng. Univ. of Calif. Berkeley CA.
19. Ritchie, D., and Leggatt, R. H., 1987, “The Measurement of the Distribution of Residual Stresses Through the Thickness of a Welded Joint,” Strain, pp. 61–70.10.1111/j.1475-1305.1987.tb00618.x ↗
20. Tada, H., Paris, P., and Irwin, G., 1973, The Stress Analysis of Cracks Handbook, Del Research Corporation, PA. See also, Paris, P. C., 1957, “The Measurement of Fracture Propagation and Solutions to Crack Arrester Problems, Doc D2–2195, The Boeing Co.
21. Vaidyanathan S. , and FinnieI., 1971, “Determination of Residual Stresses from Stress Intensity Factor Measurement,” ASME JOURNAL OF BASIC ENGINEERING, Vol. 93, pp. 242–246.10.1115/1.3425220 ↗