journal article·1999-10-01

Fracture Behavior of Kaolin-Reinforced High Density Polyethylene

Robert C. Wetherhold, Dionysios E. Mouzakis

Publisher page

Abstract

The addition of the low-cost mineral filler kaolin to high-density polyethylene (HDPE) creates a composite with both improved stiffness and toughness properties. This study focuses on two aspects of the toughness of these composites: the fracture toughness increment produced by work at the fracture surface and the directionality induced by the injection molding fabrication process. The Essential Work of Fracture (EWF) method gives results which show that a higher volume fraction of kaolin produces more surface work, consistent with earlier work using Compact Tension (CT) tests. The EWF method also demonstrates that a lower volume fraction can produce a higher overall plastic work and apparent toughness. A heat treatment that removes the orientation of the matrix but not that of the particles was applied to study the effect of matrix crystallinity. The results indicate that the matrix supramolecular structure (crystallinity and skin-core effect) is responsible for the directionality of toughness, and that a heat treatment can be used to produce high toughness behavior in both major directions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Polymer crystallization and properties · Asphalt Pavement Performance Evaluation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Aerospace Engineering, State University of New York, Buffalo, NY 14260-4400

Institut fu¨r Verbundwerkstoffe, GmbH, Universita¨t Kaiserslautern, D-67663 Kaiserslautern, Germany

References (24)

Show source-provided references
1. Antoniazzi, A., Macchetta, A., and Scapin, M., 1995, “The Influence of Testing Speed on the Toughness of Pure and Filled Polyethylene,” Impact and Dynamic Fracture of Polymers and Composites ESIS 19, J. G. Williams and A. Pavan, eds., pp. 245–253.
2. ASTM 1997, E399-90e1 Standard Test Method for Plane Strain Fracture Toughness of Metallic Materials, ASTM, West Conshohocken, PA.
3. ASTM 1989, E813-89e1 Standard Test Method for JIC, A Measure of Fracture Toughness, ASTM, West Conshohocken, PA.
4. Broberg K. B. , 1971, “Crack-Growth Criteria and Non-Linear Fracture Mechanics,” J. Mech. Phys. Solids, Vol. 19. p. 407407.10.1016/0022-5096(71)90008-1 ↗
5. Broberg K. B. , 1975, “On Stable Crack Growth,” J. Mech. Phs. Solids, Vol. 23, p. 215215.10.1016/0022-5096(75)90005-8 ↗
6. Chan W. Y. F. , and WilliamsJ. G., 1994, “Determination of the Fracture Toughness of Polymeric Films by the Essential Work of Fracture Method,” Polymer, Vol. 35, pp. 1666–1672.10.1016/0032-3861(94)90840-0 ↗
7. ESIS 1998, “Test Protocol for Essential Work of Fracture version 5,” European Structural Integrity Society, Les Diablerets, Switzerland.
8. Fatou, J. G., 1993, “Melting of Polyolefins,” Handbook of Polyolefin Synthesis and Properties, C. Vasile and R. B. Seymour, eds., Marcel Dekker, NY, p. 268.
9. Ferrigno, T. H., 1987, “Principles of Filler Selection and Use,” Handbook of Fillers for Plastics, H. S. Katz, J. V. Milewski, eds., p. 8ff.
10. Fujiyama, M., 1999, “Morphology-Mechanical Property Relationships in Injection Molding,” Polypropylene: an A-Z, Reference, J. Karger-Kocsis, ed., Kluwer Pub, Dordrecht, Netherlands.10.1007/978-94-011-4421-6_70 ↗
11. Hashemi S. , 1997, “Work of Fracture of PBT/PC Blend: Effect of Specimen Size, Geometry, and Rate of Testing,” Poly. Eng. Sci., Vol. 37, pp. 912–921.10.1002/pen.11734 ↗
12. Karger-Kocsis J. , and MoskalaE. J., 1997, “Relationships between Molecular and Plane-Stress Essential Work of Fracture Parameters in Amorphous Copolymers,” Polym. Bull., Vol. 39, pp. 503–510.10.1007/s002890050179 ↗
13. Karger-Kocsis J. , MouzakisD. E., EhrensteinG. W., VargaJ., 1999, “Instrumented Tensile and Falling Weight Impact Response of Injection–Molded α and β-Phase Polypropylene Homopolymers with Various Melt Flow Indices,” J. Appl. Polym. Sci., Vol. 73, p. 12051205.10.1002/(SICI)1097-4628(19990815)73:7<1205::AID-APP14>3.3.CO;2-Z ↗
14. Knauss, W. G., and Parvin, M., 1989, “The Constitution of an Uncrosslinked Polymer in the Process of Damage Accumulation,” Proc. 7th Int. Conf. Fract (ICF-7), Advances in Fracture Research, Vol. 5, Pergamon Press, NY, p. 3251.
15. Levita G. , MarchettiA., and LazzeriA., 1992, “Fracture Resistance of a Nylon-6/Polypropylene Blend,” Polymer Net Blends, Vol. 2, p. 172172.
16. Mai Y. W. , and CotterellB., 1986, “On the Essential Work of Ductile Fracture in Polymers,” Int. J. Fract., Vol. 32, p. 105105.10.1007/BF00019787 ↗
17. Mai Y. W. , and CotterellB., HolrlyckR., and VignaG., 1987, “The Essential Work of Plane Stress Ductile Fracture of Linear Polyethylenes,” Polyn. Eng. Sci., Vol. 27, p. 804804.10.1002/pen.760271106 ↗
18. Mattus, v., 1994, IVW Bericht 94-39 “Mechanisches Werkstoffverhalten und Versagensmechanismen von teilchenversta¨rktem Polyethylen” (Report 94-39 Mechanical behavior and Failure Mechanisms of Particulate-Reinforced Polyethlene), Institut fu¨r Verbundwerkstoffe, Universita¨t Kaiserslautern, D-67663 Kaiserslautern, Germany.
19. Mouzakis D. E. , StrickerF., Mu¨lhauptR., and Karger-KocsisJ., 1998, “Fracture Behavior of Polypropylene/Glass Bead/Elastomer Composites by using the Essential Work of Fracture Method,” J. Mat., Sci., Vol. 33, p. 25512551.10.1023/A:1004345017105 ↗
20. Privalko E. G. , PedosenkoA. V., PrivalkoV. P., WalterR., FriendrichK., 1999, “Composition-Dependent Properties of Polyethlene/Kaolin Composited I. Degree of Crystallinity and Melting Behavior of Polyethylene,” J. Appl. Polym. Sci., Vol. 73, p. 12671267.10.1002/(SICI)1097-4628(19990815)73:7<1267::AID-APP21>3.3.CO;2-N ↗
21. Saleemi A. S. , NairnJ. A., 1990, “The Plane-Strain Essential Work of Fracture as a Measure of the Fracture Toughness of Ductile Polymers,” Polym. Eng. Sci., Vol. 30, p. 211211.10.1002/pen.760300404 ↗
22. Yap O. F. , MaiY. W., CotterellB., 1983, “Thickness Effect on Fracture in High Impact Polystyrene,” J. Mater. Sci., Vol. 18, p. 657657.10.1007/BF00745563 ↗
23. Walter R. , FriedrichK., PrivalkoV., SavadoriA., 1997, “On Modulus and Fracture Toughness of Rigid Particulate Filled High Density Polyethylene,” J. Adhesion, Vol. 64. pp. 87–109.10.1080/00218469708010533 ↗
24. Zheng W. , LengY., ZhuX., 1996, “Study on Fracture Toughness of Polypropylene-high density Polyethylene-copoly(ethylene/propolyene/diene) Ternary Blends using Essential Work Concepts,” Plastics, Rubber and Compos Process App., Vol. 25, pp. 490–494.