Modeling and Identification of Elastic-Plastic Systems Using the Distributed-Element Model
Source abstract
Abstract
A modeling technique is proposed for a class of distributed-element models, which is able to account for the multi-axial Bauschinger effect without any additional kinematic hardening rules. The parameters associated with each of the elements in the model are specified by introducing an appropriate strength distribution function so as to make the model parsimonious in parameters regardless of the number of elements introduced in the model. Validity of the proposed modeling technique, in both modeling and identification of elastic-plastic systems, is demonstrated by biaxial tension-torsion applications using experimental results from the literature.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Health Monitoring Techniques · Structural Load-Bearing Analysis · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Aeronautics and Astronautics, National Cheng Kung University, Tainan, Taiwan 701
References (17)
Show source-provided references
1. Besseling J. F. , 1958, “A Theory of Elastic, Plastic, and Creep Deformation of an Initially Isotropic Material Showing Strain Hardening, Creep Recovery, and Secondary Creep,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 25, pp. 529–536.10.1115/1.4011867 ↗
2. Chiang D. Y. , and BeckJ. L., 1994a, “A New Class of Distributed-Element Models for Cyclic Plasticity—I. Theory and Application,” Int. J. Solids Structures, Vol. 31, No. 4, pp. 469–484.10.1016/0020-7683(94)90087-6 ↗
3. Chiang D. Y. , and BeckJ. L., 1994b, “A New Class of Distributed-Element Models for Cyclic Plasticity—II. On Important Properties of Material Behavior,” Int. J. Solids Structures, Vol. 31, No. 4, pp. 485–496.10.1016/0020-7683(94)90088-4 ↗
4. Chiang D. Y. , 1997, “A Phenomenological Model for Cyclic Plasticity,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 119, pp. 7–11.10.1115/1.2805979 ↗
5. Graesser, E. J., and Cozzarelli, F. A., 1991, “A Multi-Dimensional Hysteretic Model for Plastically Deforming Metals in Energy Absorbing Devices,” Technical Report NCEER-91-0006, State University of New York, Buffalo.
6. Iwan W. D. , 1966, “A Distributed Element Model for Hysteresis and Its Steady-State Dynamic Response,” ASME Journal of Applied Mechanics, Vol. 33, No. 4, pp. 893–900.10.1115/1.3625199 ↗
7. Iwan W. D. , 1967, “On a Class of Models for the Yielding Behavior of Continuous and Composite Systems,” ASME Journal of Applied Mechanics, Vol. 34, No. 2, pp. 612–617.10.1115/1.3607751 ↗
8. Lamba H. S. , and SidebottomO. M., 1978a, “Cyclic Plasticity for Nonproportional Paths: Part 1—Cyclic Hardening, Erasure of Memory, and Subsequent Strain Hardening Experiments,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 100, pp. 96–103.10.1115/1.3443456 ↗
9. Lamba H. S. , and SidebottomO. M., 1978b, “Cyclic Plasticity for Nonproportional Paths: Part 2—Comparison with Predictions of Three Incremental Plasticity Models,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 100, pp. 104–111.10.1115/1.3443440 ↗
10. McDowell, D. L., Socie, D. F., and Lamba, H. S., 1982, “Multiaxial nonproportional cyclic deformation,” Low-Cycle Fatigue and Life Prediction, ASTM, STP 770, pp. 500–518.10.1520/STP32443S ↗
11. Meijers P. , and RoodeF., 1983, “Experimental Verification of Constitutive Equations for Creep and Plasticity Based on Overlay Models,” ASME Journal of Pressure Vessel Technology, Vol. 105, pp. 277–284.10.1115/1.3264279 ↗
12. Park Y. J. , WenY. K., and AugA. H-s., 1986, “Random vibration of hysteretic systems under bi-directional ground motions,” Int. J. Earthq. Eng. Struct. Dynam., Vol. 14, pp. 543–557.10.1002/eqe.4290140405 ↗
13. Press, W. H., Teukolsky, S. A., Vetterling, W. T., and Flannery, B. P., 1992, Numerical Recipes in Fortran: The Art of Scientific Computing, 2nd ed., Cambridge University Press.
14. Valanis K. C. , 1971, “A Theory of Viscoplasticity Without a Yield Surface, Part 1: General Theory; Part 2: Application to Mechanical Behavior of Metals,” Archive of Mechanics, Vol. 23, No. 4, pp. 517–551.10.21236/AD0725030 ↗
15. Valanis K. C. , 1980, “Fundamental Consequences of a New Intrinsic Time Measure: Plasticity as a Limit of the Endochronic Theory,” Archive of Mechanics, Vol. 23, No. 2, pp. 171–191.
16. Valanis K. C. , and FanJ., 1984, “A Numerical Algorithm for Endochronic Plasticity and Comparison with Experiment,” Computers and Structures, Vol. 19(516), pp. 714–724.10.1016/0045-7949(84)90171-8 ↗
17. Whiteman I. R. , 1959, “A Mathematical Model Depicting the Stress-Strain Diagram and the Hysteresis Loop,” ASME Journal of Applied Mechanics, Vol. 81, pp. 95–100.10.1115/1.4011928 ↗