journal article·1996-01-01

A Two Surface Plasticity Model With Bounding Surface Softening

C. S. White

Publisher page

Abstract

Two surface plasticity models have been used increasingly in recent years to model not only uniaxial, cyclic plasticity but also multiaxial and nonproportional histories. A two surface model is presented here which predicts the increased hardening due to out-of-phase cycling in a natural way. It includes a mechanism by which the bounding surface contracts when the yield surface is not in contact. This provides a mechanism that is useful for modeling cycling behavior. Predictions of the model with experiments at moderate strain are presented.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Northeastern University, Boston, MA 02115

References (29)

Show source-provided references
1. Abdul-Latif , ClavelM., FerneyV., and SaanouniK., 1994, “On the Modeling of Nonproportional Cyclic Plasticity of Waspaloy,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 116, pp. 35–44.10.1115/1.2904253 ↗
2. Bate P. S. , and WilsonD. V., 1986, “Analysis of the Bauschinger Effect,” Acta Metallurgica, Vol. 34, pp. 1097–1105.10.1016/0001-6160(86)90220-8 ↗
3. Benallal A. , and MarquisD., 1987, “Constitutive Equations for Nonproportional Cyclic, Elasto-Viscoplasticity,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 109, pp. 326–336.10.1115/1.3225985 ↗
4. Bodner S. R. , and PartomY., 1975, “Constitutive Equations for Elastic-Viscoplastic Strain-Hardening Materials,” ASME Journal of Applied Mechanics, Vol. 42, pp. 385–389.10.1115/1.3423586 ↗
5. Brown S. B. , KimK. H., and AnandL., 1989, “An Internal Variable Constitutive Model for Hot Working of Metals,” International Journal of Plasticity, Vol. 5, pp. 95–130.10.1016/0749-6419(89)90025-9 ↗
6. Cailletaud G. , KaczmarekH., and PolicellaH., 1984, “Some Elements on Multiaxial Behavior of 316L Stainless Steel at Room Temperature,” Mechanics of Materials, Vol. 3, pp. 333–347.10.1016/0167-6636(84)90033-4 ↗
7. Chaboche J. L. , 1986, “Time-Independent Constitutive Theories for Cyclic Plasticity,” International Journal of Plasticity, Vol. 2, pp. 149–188.10.1016/0749-6419(86)90010-0 ↗
8. Dafalias Y. F. , 1983, “Corotational Rates for Kinematic Hardening at Large Plastic Deformations,” ASME Journal of Applied Mechanics, Vol. 50, pp. 561–565.10.1115/1.3167091 ↗
9. Dafalias Y. F. , and PopovE. P., 1976, “Plastic Internal Variables Formalism of Cyclic Plasticity,” ASME Journal of Applied Mechanics, Vol. 43, pp. 645–651.10.1115/1.3423948 ↗
10. Doong S. H. , SocieD. F., and RobertsonI. M., 1990, “Dislocation Substructures and Nonproportional Hardening,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 112, pp. 456–464.10.1115/1.2903357 ↗
11. Feltner C. E. , 1963, “Dislocation Arrangements in Aluminum Deformed by Repeated Tensile Stresses,” Acta Metallurgica, Vol. 11, pp. 817–828.10.1016/0001-6160(63)90021-X ↗
12. Hasegawa T. , YakowT., and KarashimaS., 1975, “Deformation Behavior and Dislocation Structures Upon Stress Reversal in Polycrystalline Aluminum,” Material Science and Engineering, Vol. 20, pp. 267–276.10.1016/0025-5416(75)90159-7 ↗
13. Krempl E. , and LuH., 1984, “The Hardening and Rate-Dependent Behavior of Fully Annealed AISI 304 Stainless Steel Under Biaxial In-Phase and Out-of-Phase Strain Cycling at Room Temperature,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 106, pp. 376–382.10.1115/1.3225733 ↗
14. Krieg R. D. , 1975, “A Practical Two Surface Plasticity Theory,” ASME Journal of Applied Mechanics, Vol. 47, pp. 641–646.10.1115/1.3423656 ↗
15. Lemaitre, J., and Chaboche, J.-L., 1990, Mechanics of Solid Materials, Cambridge University Press, p. 113.10.1017/CBO9781139167970 ↗
16. Loret B. , 1983, “On the Effect of Plastic Rotation in the Finite Deformation of Anisotropic Elastoplastic Materials,” Mechanics of Materials, Vol. 2, pp. 287–304.10.1016/0167-6636(83)90021-2 ↗
17. Lowe T. C. , and MillerA. K., 1983, “The Nature of Directional Strain Softening,” Scripta Metallurgica, Vol. 17, pp. 1177–1182.10.1016/0036-9748(83)90279-X ↗
18. Marukawa K. , and SanpeiT., 1971, “Stability of the Work Hardened State Against Stress Reversal in Copper Single Crystals,” Acta Metallurgica, Vol. 19, pp. 1169–1176.10.1016/0001-6160(71)90049-6 ↗
19. McDowell D. L. , 1985a, “An Experimental Study of the Structure of Constitutive Equations for Nonproportional Cyclic Plasticity,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 107, pp. 307–315.10.1115/1.3225824 ↗
20. McDowell D. L. , 1985b, “A Two Surface Model for Transient Nonproportional Cyclic Plasticity,” ASME Journal of Applied Mechanics, Vol. 52, pp. 298–308.10.1115/1.3169045 ↗
21. McDowell D. L. , 1987, “An Evaluation of Recent Developments in Hardening and Flow Rules for Rate-Independent, Nonproportional Cyclic Plasticity,” ASME Journal of Applied Mechanics, Vol. 54, pp. 323–334.10.1115/1.3173015 ↗
22. McDowell D. L. , and MoyarG. J., 1991, “Effects of Non-Linear Kinematic Hardening on Plastic Deformation and Residual Stresses in Rolling Line Contact,” Wear, Vol. 144, pp. 19–37.10.1016/0043-1648(91)90004-E ↗
23. McDowell D. L. , StockS. R., StahlD., and AntolovichS. D., 1988, “Biaxial Path Dependence of Deformation Substructure of Type 304 Stainless Steel,” Metallurgical Transactions, Vol. 19A, May pp. 1277–1293.10.1007/BF02662589 ↗
24. Moosbrugger J. C. , and McDowellD. L., 1989, “On a Class of Kinematic Hardening Rules for Nonproportional Cyclic Plasticity,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 111, pp. 87–98.10.1115/1.3226439 ↗
25. Mroz Z. , 1967, “On the Description of Anisotropic Workhardening,” Journal of the Mechanics and Physics of Solids, Vol. 15, pp. 163–175.10.1016/0022-5096(67)90030-0 ↗
26. Ohno N. , 1990, “Recent Topics in Constitutive Modeling of Cyclic Plasticity and Viscoplasticity,” ASME Applied Mechanics Reviews, Vol. 43, 1990, pp. 283–295.10.1115/1.3119155 ↗
27. Takahaski Y. , and OgataT., 1991, “Description of Nonproportional Cyclic Plasticity of Stainless Steel by a Two-Surface Model,” ASME Journal of Applied Mechanics, Vol. 58, pp. 623–630.10.1115/1.2897241 ↗
28. Trampczynski W. , 1988, “The Experimental Verification of the Evolution of Kinematic and Isotropic Hardening in Cyclic Plasticity,” Journal of the Mechanics and Physics of Solids, Vol. 36, pp. 417–441.10.1016/0022-5096(88)90026-9 ↗
29. White C. S. , BronkhorstC. A., and AnandL., 1990, “An Improved Isotropic-Kinematic Hardening Model for Moderate Deformation Metal Plasticity,” Mechanics of Materials, Vol. 10, pp. 127–147.10.1016/0167-6636(90)90023-9 ↗