journal article·1999-07-01

Fatigue Life Parameter for Type 304 Stainless Steel Under Biaxial-Tensile Loading at Elevated Temperature

Abdelkrim Zouani, Thang Bui-Quoc, Marie Bernard

Publisher page

Abstract

This paper describes a damage Parameter for predicting fatigue life under biaxial-tensile loadings. Several studies have focussed in the past on the situations where the in-plane biaxial stress ratio is negative; however, little attention has been paid for the cases involving both principal stresses in tension. A new testing method is used to carry out biaxial fatigue tests, at room and 427°C, on Type 304 stainless steel for different positive values of the stress ratio. In the experimental procedure, a disk-shaped specimen was used in connection with a spatial-arms mechanism which converts the uniaxial force generated by a conventional testing machine to radial forces extending the disk specimen. A modified virtual strain energy parameter is then suggested to normalize fatigue data obtained under a wide range of stress states. The proposed parameter accounts for the mean stress and the mean strain effects in an explicit form. In addition, the COD equivalent stress and strain concepts are adopted to account for the stress state biaxiality. The predictions of the proposed parameter are compared with the obtained experimental data and the correlation between the applied stress states and the experimental fatigue lives is discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Fire effects on concrete materials · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Ecole Polytechnique de Montreal, Department of Mechanical Engineering, Montreal, Canada

References (27)

Show source-provided references
1. ASME Boiler and Pressure Vessel Code, 1980, Section III, Code Case N-47-12, Rules for Construction of Nuclear Power Plant Components.
2. Bannantine J. A. , 1991, “A Review of Multiaxial Fatigue Damage Models and Observed Material Behavior,” Impact of Improved Material Quality on Properties, Product and Design, MD-Vol. 28, pp. 213–237.
3. Bannantine, J. A., and Socie, D. F., 1988, “Observations of Cracking Behavior in Tension and Torsion Low Cycle Fatigue,” Low Cycle Fatigue, ASTM STP 1122, H. D. Solomon, G. R. Halford, L. R. Kaisand, and B. N. Leis, (eds.), ASTM, Philadelphia, pp. 899–921.10.1520/STP24530S ↗
4. Bonacuse P. J. , and KalluriS., 1995, “Elevated Temperature Axial and Torsional Fatigue Behavior of Haynes 188,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 117, pp. 191–199.10.1115/1.2804529 ↗
5. Brown, M. W., and Miller, K. J., 1982, “Two Decades of Progress in the Assessment of Multiaxial Low-Cycle Fatigue Life,” ASTM STP 770, pp. 482–499.10.1520/STP32442S ↗
6. Chu, C., Conle, A., and Bonnen, J. J. F., 1993, “Multiaxial Stress-Strain Modeling and Fatigue Life Prediction of SAE Axle Shafts,” Advances in Multiaxial Fatigue, ASTM STP 1191, D. L. McDowell and R. Ellis, (eds.), American Society of Testing and Materials, Philadelphia, pp. 37–54.10.1520/STP24794S ↗
7. Davis E. A. , and ConnellyF. M., 1959, “Stress Distribution and Plastic Deformation in Rotating Cylinders of Strain Hardening Material,” ASME JOURNAL OF APPLIED MECHANICS, Vol. 81, pp. 25–30.10.1115/1.4011918 ↗
8. Ellyin F. , and GolosK., 1988, “Multiaxial Fatigue Damage Criteria,”ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 110, pp. 63–68.10.1115/1.3226012 ↗
9. Ellyin F. , GolosK., and XiaZ., 1991, “In-Phase and Out-of-Phase Multiaxial Fatigue,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 113, pp. 112–118.10.1115/1.2903365 ↗
10. Ellyin, F., and Kujawski, D., 1993, “A Multiaxial Fatigue Criterion Including Mean-Stress Effect,” Advances in Multiaxial Fatigue, ASTM STP 1191, D. L. McDowell and R. Ellis, (eds.), American Society of Testing and Materials, Philadelphia, pp. 55–66.10.1520/STP24795S ↗
11. Ellyin, F., and Wolodko, J. D., 1997, “Testing Facilities for Multiaxial Loading of Tubular Specimens,” Proc. of the 1995 Symposium on Multiaxial Fatigue and Deformation Testing Techniques, SAE STP 1280, Denver, CO, pp. 7–24.10.1520/STP16210S ↗
12. Findley W. N. , 1959, “A Theory for the Effect of Mean Stress on Fatigue of Metals Under Combined Torsional and Axial Load or Bending,” ASME Journal of Engineering for Industry, Vol. 81, pp. 301–306.10.1115/1.4008327 ↗
13. Garud Y. S. , 1981, “A New Approach to the Evaluation of Fatigue Under Multiaxial Loadings,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 103, pp. 1118–1215.10.1115/1.3224982 ↗
14. Glinka G. , WangG., and PlumtreeA., 1995, “Mean Stress Effects in Multiaxial Fatigue,” Journal Fatigue and Fract. Engng. Mater. Struct., Vol. 18, No. 7/8, pp. 755–764.10.1111/j.1460-2695.1995.tb00901.x ↗
15. Itoh T. , SakaneM., and OhnamiM., 1994, “High Temperature Multiaxial Low Cycle Fatigue of Cruciform Specimen,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 116, No. 1, pp. 90–98.10.1115/1.2904261 ↗
16. Kandil F. A. , BrownM. W., and MillerK. J., 1982, “Biaxial Low-Cycle Fatigue of 316 Stainless Steel at Elevated Temperatures,” The Metals Society, Vol. 280, London, pp. 203–210.
17. Liu, K. C., 1993, “A Method Based on Virtual Strain-Energy Parameter for Multiaxial Fatigue Life Prediction,” Advances in Multiaxial Fatigue, ASTM STP 1191, D. L. McDowell and R. Ellis, (eds.), American Society of Testing and Materials, Philadelphia, pp. 67–84.10.1520/STP24796S ↗
18. Manson S. S. , and HalfordG. R., 1977, “Discussion, Multiaxial Low Cycle Fatigue of Type 304 Stainless Steel,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 99, No. 3, pp. 283–286.10.1115/1.3443541 ↗
19. Morrow, J. D., 1965, “Cyclic Plastic Strain Energy and Fracture of Metals,” ASTM STP 378, pp. 45.10.1520/STP43764S ↗
20. Pascoe K. J. , and De VilliersJ. W. R., 1967, “Low-Cycle Fatigue of Steels Under Biaxial Straining,” Journal of Strain Analysis, Vol. 2, No. 2, pp. 117–126.10.1243/03093247V022117 ↗
21. Sakane M. , OhnamiM., and SawadaM., 1991, “Biaxial Low Cycle Fatigue of Unaged and Aged 1Cr-1Mo-1/4V Steels at Elevated Temperature,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 113, No. 1, pp. 244–253.10.1115/1.2903399 ↗
22. Sines, G., 1955, “Failure of Materials Under Combined Repeated Stresses with Superimposed Static Stresses,” Technical Note 3495, NACA, Washington, D.C.
23. Smith R. N. , WatsonP., and TopperT. H., 1970, “A Stress Strain Function for the Fatigue of Metals,” Journal of Materials, JMLSA, Vol. 5, No. 4, pp. 767–778.
24. Socie D. , 1987, “Multiaxial Fatigue Damage Models,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 109, pp. 293–298.10.1115/1.3225980 ↗
25. Zouani A. , Bui-QuocT., and BernardM., 1996, “Optimal Design of a Disk-Shaped Specimen for Biaxial-Tensile Fatigue Testing,” ASTM Journal of Testing and Eval., Vol. 24, No. 5, pp. 287–294.10.1520/JTE11306J ↗
26. Zouani A. , Bui-QuocT., and BernardM., 1997, “Cyclic Behavior Under Biaxial-Tensile Stress State at Room and Elevated Temperature,” Fatigue and Fracture-1997, ASME PVP-Vol. 350, Vol. 1, pp. 495–503.
27. Zouani A. , Bui-QuocT., and BernardM., 1998, “Fatigue Life Investigation Under Biaxial-Tensile Stress State,” Fatigue, Fracture, and High Temperature Design Methods in Pressure Vessels and Piping, AIME PVP-Vol. 365, pp. 347–352.