Asymptotic Approach to the Hill Model of Spread in Rolling
Source abstract
Abstract
A simplified procedure for the solution of the spread model proposed by Hill (1963) is presented for situations where the strip width is greater than the roll-gap length. The method utilizes a perturbation expansion for the width function and results in a simple analytical solution, overcoming the difficulties involved in solving the original complex, nonlinear, fourth-order differential equation. The solution provides insight into the relationship between the spread predicted and the roll gap parameters, and allows the assumptions made to be evaluated as leading order estimates to the stresses are produced.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Vibration and Dynamic Analysis · Mechanical stress and fatigue analysis · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Electrical and Computer Engineering, University of Newcastle, Callagtian 2308, Australia
Department of Mathematics, University of Newcastle, Callagtian 2308, Australia
Department of Electrical and Computer Engineering, University of Newcastle, Callaghan 2308, Australia
References (15)
Show source-provided references
1. Helmi A. , and AlexanderJ. M., 1968, “Geometric Factors Affecting Spread in Hot Flat Rolling of Steel,” J. Iron Steel Inst., Vol. 206, pp. 1110–1117.
2. Hill R. , 1963, “A General Method of Analysis for Metal-Working Processes,” J. Mech. Phys. Solids, Vol. 11, pp. 305–326.10.1016/0022-5096(63)90033-4 ↗
3. Johnson R. E. , 1991, “Shape Forming and Lateral Spread in Sheet Rolling,” Int. J. Mech. Sci., Vol. 33, pp. 449–469.10.1016/0020-7403(91)90081-D ↗
4. Karabin M. E. , and SmelserR. E., 1990, “A Quasi-Three-Dimensional Analysis of the Deformation Processing of Sheets with Applications,” Int. J. Mech. Sci., Vol. 32, pp. 375–389.10.1016/0020-7403(90)90167-H ↗
5. Karabin M. E. , and JohnsonR. E., 1993, “A Comparison of Asymptotic and Numerical Rolling Models for Quasi-Three-Dimensional Problems,” Int. J. Mech. Sci., Vol. 35, pp. 425–439.10.1016/0020-7403(93)90013-K ↗
6. Lahoti G. D. , and KobayashiS., 1974, “On Hill’s General Method of Analysis for Metal-Working Processes,” Int. J. Mech. Sci., Vol. 16, pp. 521–540.10.1016/0020-7403(74)90018-6 ↗
7. Li, G. J., and Kobayashi, S., 1982, “Spread Analysis in Rolling by the Rigid-Plastic Finite Element Method,” Numerical Methods in Industrial Forming Processes, J. F. T. Pittman et al., eds., Swansea, Pineridge Press, pp. 777–786.
8. Liu C. , HartleyP., SturgessC. E. N., and RoweG. W., 1987, “Finite-Element Modelling of Deformation and Spread in Slab Rolling,” Int. J. Mech. Sci., Vol. 29, pp. 271–283.10.1016/0020-7403(87)90040-3 ↗
9. Matsumoto H. , “Two-Dimensional Lateral-Material-Flow Model Reduced from Three-Dimensional Theory for Flat Rolling,” I.S.I.J., Vol. 31, pp. 550–558.10.2355/isijinternational.31.550 ↗
10. Mori K. , and OsakadaK., “Simulation of Three-Dimensional Deformation in Rolling by the Finite-Element Method,” Int. J. Mech. Sci., Vol. 26, pp. 515–525.10.1016/0020-7403(84)90005-5 ↗
11. Oh S. I. , and KobayashiS., 1975, “An Approximate Method for a Three-Dimensional Analysis of Rolling,” Int. J. Mech. Sci., Vol. 17, pp. 293–305.10.1016/0020-7403(75)90010-7 ↗
12. Sparling L. G. M. , 1961, “Formulae for ‘Spread’ in Hot Flat Rolling,” Proc. Inst. Mech. Eng., Vol. 175, No. 11, pp. 604–611.10.1243/PIME_PROC_1961_175_043_02 ↗
13. Tozawa, Y., Ishikawa, T., and Iwata, N., 1982, “Predicting the Profile of Rolled Strip,” Numerical Methods in Industrial Forming Processes, J. F. T. Pittman et al., eds., Swansea, Pineridge Press, pp. 787–796.
14. Wusatowski Z. , 1955, “Hot Rolling: A Study of Draught, Spread, and Elongation,” Iron Steel, Vol. 28, pp. 49–54.
15. Zaharoff T. L. , JohnsonR. E., and KarabinM. E., 1992, “Spread in Sheet Rolling: A Comparison Using Experiments, Analytical Solutions and Numerical Techniques,” Int. J. Mech. Sci., Vol. 34, pp. 435–442.10.1016/0020-7403(92)90010-E ↗