Hybrid Bishop-Hill Model for Elastic-Yield Limited Design With Non-orthorhombic Polycrystalline Metals
Source abstract
Abstract
A method is presented for adapting the classical Bishop-Hill model to the requirements of elastic/yield-limited design in metals of arbitrary crystallographic texture. The proposed Hybrid Bishop-Hill (HBH) model, which will be applied to ductile FCC metals, retains the “stress corners” of the polyhedral Bishop-Hill yield surface. However, it replaces the ‘maximum work criterion’ with a criterion that maximizes the projection of the applicable local corner stress state onto the macroscopic stress state. This compromise leads to a model that is much more accessible to yield-limited design problems. Demonstration of performance for the HBH model is presented for an extensive database for oxygen free electronic copper. The design problem considered is a hole-in-a-plate configuration of thin sheets loaded in uniaxial tension in arbitrary directions relative to the principal directions of material orthorhombicity. Results obtained demonstrate that HBH-based elastic/yield limited design is capable of predicting complex and highly nonintuitive behaviors, even within standard problems.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Advanced Surface Polishing Techniques · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Brigham Young University, Provo, Utah 84602
References (22)
Show source-provided references
1. Ashby
2. Juvinall
3. “The Yield Surface of Textured Polycrystals10.1016/0022-5096(85)90035-3 ↗
4. “Yield Surfaces for Textured Polycrystals—II. Analytical Approach10.1016/0001-6160(87)90063-0 ↗
5. “A Theory of the Yielding and Plastic Flow of Anisotropic Metals
6. “Plastic Strain in Metals
7. “A Theoretical Derivation of the Plastic Properties of a Polycrystalline Face-Centered Metal10.1080/14786444108561385 ↗
8. “A Theory of the Plastic Distortion of a Polycrystalline Aggregate Under Combined Stresses10.1080/14786445108561065 ↗
9. “Simulation of Deformation Texture Evolution Using an Intermediate Model10.4028/www.scientific.net/SSP.105.251 ↗
10. Adams
11. “Mi-crostructure Sensitive Design for Performance Optimization10.1016/j.pmatsci.2009.08.002 ↗
12. Lekhnitskii
13. Bunge
14. “Application of a New Automatic Lattice Orientation Measurement Technique to Polycrystalline Aluminum10.1016/0921-5093(93)90452-K ↗
15. Prager
16. “Computer Solutions of the Taylor Analysis for Axisymmetric Flow
17. “The Resolved Shear Stress on the Non-Active Systems in Taylor/Bishop-Hill Models for FCC Polycrystals10.1016/S1359-6462(99)00318-8 ↗
18. “Accessing the Elastic-Plastic Properties Closure by Rotation and Lamination10.1016/j.actamat.2007.09.025 ↗
19. “Representation of the Orientation Distribution Function and Computation of First-Order Elastic Properties Closures Using Discrete Fourier Transforms10.1016/j.actamat.2009.04.055 ↗
20. “Fast Computation of First-Order Elastic-Plastic Closures for Polycrystalline Cubic-Orthorhombic Microstructures10.1016/j.commatsci.2006.08.025 ↗
21. “A Comprehensive Mathematical Formulation of an Extended Taylor-Bishop-Hill Model Featuring Relaxed Constraints, the Renouard-Wintenberger Theory and a Strain Rate Sensitivity Model
22. Kocks