Mechanical Characterization of a CVD Diamond Coating by Nanoindentation Test
Source abstract
Abstract
A FEM analysis was carried out to study the mechanical behavior of a hard coating subjected to a nanoindentation test performed with a Berkovich indenter. The nanoindentation test was simulated by FEM code MSC Marc. The case study is a coating of CVD (Chemical Vapor Deposition) diamond. By the simulation it is possible to obtain the load-displacement curve by which Young modulus and hardness may be evaluated. The paper also analyzes the residual stresses developed at the end of the unloading phase and the influence of the strengthening law to determine the hardness and the elastic modulus of the CVD diamond. The analysis has demonstrated, by the comparison with the experimental results, that the numerical model well describes the behavior of the coating of CVD diamond in the nanoindentation test; in addition it was pointed out that the choice of the hardening law is a crucial aspect in the simulation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering Department, University of Calabria, 87030 Arcavacata di Rende (CS), Italy
References (22)
Show source-provided references
1. Pethica, J. B., Hutchings, R., and Oliver, W. C., 1983, “Hardness Measurements at Penetration Depths as Small as 20 nm,” Philos. Mag. A, 48, pp. 593–606.10.1080/01418618308234914 ↗
2. Loubet, J. L., Georges, J. M., Marchesini, O., and Meille, G., 1984, “Vickers Indentation Curves of Magnesium Oxide (MgO),” ASME J. Tribol., 106, pp. 43–48.10.1115/1.3260865 ↗
3. Doerner, M. F., and Nix, W. D., 1985, “A Method for Interpreting the Data From Depth-Sensing Indentation Instruments,” J. Mater. Res., 1, pp. 601–609.10.1557/JMR.1986.0601 ↗
4. Oliver, W. C., and Pharr, G. M., 1992, “An Improved Technique for Determining Hardeness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments,” J. Mater. Res., 7, pp. 1564–1583.10.1557/JMR.1992.1564 ↗
5. Rubinstein, C. , 1981, “A Critical Appraisal of Static Hardness Measurements,” ASME J. Appl. Mech., 48, pp. 796–802.10.1115/1.3157736 ↗
6. Giannakopoulos, A. E., Larrson, P. L., and Vestergaard, R., 1994, “Analysis of Vickers Indentations,” Int. J. Solids Struct., 31, pp. 2679–2708.10.1016/0020-7683(94)90225-9 ↗
7. Jayaraman, S., Hahn, G. T., Oliver, W. C., Rubin, C. A., and Bastias, P. C., 1998, “Determination of Monotonic Stress-Strain Curve of Hard Materials From Ultra-Low-Load Indentation Tests,” Int. J. Solids Struct., 35, pp. 365–381.10.1016/S0020-7683(97)89371-7 ↗
8. Beghini, M., Bertini, L., Montanari, V., and Felicetti, L., 1999, “Identificazione della Curva Tensione-Deformazione sulla Base di Prove di Durezza Strumentate,” XXVIII Convegno Nazionale AIAS, Vicenza, pp. 597–605.
9. Feng, Z., Tzeng, Y., and Field, J. E., 1992, “Solid Particle Impact of CVD Diamond Films,” Thin Solid Films, 212, pp. 35–42.10.1016/0040-6090(92)90497-Y ↗
10. Field, J. E., 1992, The Properties of Natural and Synthetic Diamond, Academic Press, London.
11. Wood, R. J. K., and Wheeler, D. W., 1992, “Design and Performance of a High Velocity Air-Sand Jet Impingement Erosion Facility,” Wear, 220, pp. 95–112.10.1016/S0043-1648(98)00196-3 ↗
12. Kamo, M., Matsumoto, S., Sato, Y., and Setaka, N., 1982, “Diamond Synthesis From Gas Phase in Microwave Plasma,” J. Cryst. Growth, 62, pp. 642–645.10.1016/0022-0248(83)90411-6 ↗
13. Matsumoto, S., Sato, Y., Setaka, N., and Tsutsumi, M., 1982, “Growth of Diamond Particles From Methane-Hydrogen Gas,” J. Mater. Sci., 17, pp. 3106–3112.10.1007/BF01203472 ↗
14. “NanoTest 600,” Micro Materials Ltd., Unit 3, The Byre, Wrexham Technology Park, Wrexham, LL13 7YP, UK.
15. Sneddon, I. N. , 1965, “The Relaxation Between Load and Penetration in the Axisymmetric Bussinesq Problem for a Punch of Arbitrary Profile,” Int. J. Eng. Sci., 3, pp. 47–57.10.1016/0020-7225(65)90019-4 ↗
16. Field, J. S., and Swain, M. V., 1995, “Indentation Characterization of Carbon Materials,” Mater. Res. Soc. Symp. Proc., 383, pp. 85–100.10.1557/PROC-383-85 ↗
17. Zagrebelny, A. V., Lilleodden, E. T., Gerberich, W. W., and Carter, C. B., 1999, “Indentation of Silicate-Glass Films on Al2O3 Substrates,” J. Am. Ceram. Soc., 82, pp. 1803–1808.10.1111/j.1151-2916.1999.tb02002.x ↗
18. Tabor, D., 1951, The Hardness of Metals, Clarendon Press, Oxford.
19. De Fazio, L., and Furgiuele, F. M., 2000, “Caratterizzazione di Rivestimenti di Diamante CVD mediante Prove di Nanoindentazione,” XV Convegno Nazionale IGF, Bari, pp. 123–129.
20. Savvides, N., and Bell, T. J., 1992, “Microhardness and Young’s Modulus of Diamond and Diamondlike Carbon Films,” J. Appl. Phys., 72, pp. 2791–2796.10.1063/1.351530 ↗
21. Kant, A., Drory, M. D., Moody, N. R., MoberlyChan, W. J., Ager, J. W., and Ritchie, R. O., 1998, “Microstructural Effects on the Hardness, Elastic Modulus and Fracture Toughness of CVD Diamond,” Mater. Res. Soc. Symp. Proc., 505, pp. 611–616.10.1557/PROC-505-611 ↗
22. Anstis, G. R., Chantikul, P., Lawn, B. R., and Marshall, D. B., 1981, “A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements,” J. Am. Ceram. Soc., 64, pp. 533–538.10.1111/j.1151-2916.1981.tb10320.x ↗