journal article·2016-10-01

Plastic Forming of AZ91 Alloy Using the KOBO Method

Włodzimierz Bochniak, Paweł Ostachowski, Sylwester Jagieła

Publisher page

Abstract

The desirability of using the KOBO extrusion process for AZ91 magnesium alloy preceding its further plastic processing has been experimentally verified. Importantly, during the conducted experiments, heat treatment (e.g., homogenization) was applied either before or after direct KOBO extrusion, which if used might have affected the properties of the alloy. The products of the cold KOBO process take the form of tapes with different cross sections. They were pressed (deep drawing), or, alternatively, subjected to conventional indirect extrusion in order to acquire the desired spatial geometry of the product. Due to the need for relatively wide strips, a variant of the KOBO extrusion with lateral outflow was used, since the press structure, providing reversibly oscillating die, strongly limited the cross sections of directly extruded products. The research procedure, involving plastic deformation with cyclic changes of the deformation path, allowed to obtain results indicating new potential properties of metallic materials crucial for their applicability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

AGH—University of Science and Technology, Faculty of Non–Ferrous Metals, A. Mickiewicza Avenue 30, Cracow 30–059, Poland e-mail:

References (14)

Show source-provided references
1. Superplasticity in a Magnesium Alloy Subjected to Isothermal Rolling10.1016/j.scriptamat.2004.04.005 ↗
2. Developing Superplasticity in a Magnesium Alloy Through a Combination of Extrusion and ECAP10.1016/S1359-6454(03)00118-6 ↗
3. Grain Refinement and High Temperature Deformation in Friction Stir Processed Sheets of Magnesium Alloys10.4028/www.scientific.net/MSF.551-552.55 ↗
4. Microstructural Evolution and Superplasticity of Rolled Mg–9Al–1Zn10.1016/S0921-5093(00)00959-X ↗
5. Superplasticity and Grain Boundary Sliding in Rolled AZ91 Magnesium Alloy at High Strain Rates10.1016/S0921-5093(03)00407-6 ↗
6. Method of Plastic Forming of Materials
7. Method of Plastic Forming of Materials
8. Refinement and Control of the Metal Structure Elements by Plastic Deformation10.1016/j.scriptamat.2004.06.020 ↗
9. Visco-Plastic Flow of Metal in Dynamic Conditions of Complex Strain Scheme10.1007/s11661-011-0688-x ↗
10. Lüders Deformation and Superplastic Flow of Metals Extruded by KOBO Method10.1080/14786435.2013.765977 ↗
11. Bochniak, W., and Korbel, A., 2014, “Viscous Flow of Light Alloys Subjected to Large Strain at Low Temperature,” 20th International Symposium on Plasticity and Its Current Application, Freeport, Bahamas, Jan. 3–8, pp. 16–18.
12. Mechanical Properties of Aluminum Extruded via the KOBO Method With Direct and Lateral Outflow10.3139/146.110953 ↗
13. Extrusion of Metals and Alloys by KOBO Method
14. Structure and Mechanical Properties of AlMg4.5 and AlMg4.5Mn Wires Extruded by KOBO Method10.2478/amm-2014-0078 ↗