journal article·2006-07-01

Actual Safety Distance and Winding Tension to Manufacture Full Section Parts by Robotized Filament Winding

W. Polini, L. Sorrentino

Publisher page

Abstract

Robotized filament winding technology allows one to manufacture workpieces of high performances as a result of a robot placing fibers impregnated by resin (known as roving) along the directions of stresses the workpiece is subjected to in exercise; thus, robotized filament winding favors rigidity and strength of a workpiece along some preferential directions. A proper value of the winding tension has to be chosen and kept constant along the whole winding in order to limit the defects inside the composite workpieces. To keep the tension value on roving near to the nominal value, one must plan the value of the geometric parameters characterizing the winding trajectory. The same geometric parameters influence the value of the actual safety distance that may involve collisions among the deposition system and the components of the robotized cell. This work shows how to avoid the occurrence of collisions by planning the value of the actual safety distance through the definition of geometric parameters that characterize the winding trajectory. Moreover, the collision occurrence should be considered together with the control of the winding tension on the roving in the robotized filament winding planning stage. The present work shows how to solve both the problems previously defined (i.e., to keep the winding tension on roving near to the nominal value and to avoid collision occurrence), by the solution of a constrained optimization system.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Additive Manufacturing and 3D Printing Technologies · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Dipartimento di Ingegneria Industriale, Università degli Studi di Cassino, Via G. di Biasio, 43, 03043 Cassino, Italy

References (16)

Show source-provided references
1. A New Robotized Filament Winding Cell to Manufacture Complex Shape Parts
2. Modular Structure of a New Feed-Deposition Head for a Robotized Filament Winding Cell10.1016/S0266-3538(03)00174-X ↗
3. Winding Trajectory and Winding Time in Robotized Filament Winding of Complex-Shape Part10.1177/0021998305050431 ↗
4. Design and Off-Line Programming of a Robotic Tape Winding Cell10.1016/0736-5845(95)00021-6 ↗
5. An All-Geodesic Algorithm for Filament Winding of a T-Shaped Form10.1109/41.107105 ↗
6. The New Generation Computer Controlled Filament Winding Machines Developed in China
7. Algorithms for Computer-Aided Robotic Filament Winding
8. Design and Tension Control of Filament Winding System
9. Influence of Filament Winding Parameters on Composite Vessel Quality and Strength10.1016/S1359-835X(97)00073-0 ↗
10. Evaluation of Processing Parameters of Thermoplastic Composites Fabricated by Filament Winding10.1016/0956-7143(93)90076-K ↗
11. Influence of the Filament Winding Tension on Physical and Mechanical Properties of Reinforced Composites10.1016/S1359-835X(02)00209-9 ↗
12. Accuracy-Speed Relationships of a Robotic Filament Winding Cell10.1016/0736-5845(95)00025-9 ↗
13. Carrino, L., Polini, W., and Sorrentino, L., 2002, “Experimental Validation of a New Fiber Deposition Device for a Robotized Filament Winding Cell,” ECCM10 “10th European Conference on Composite Materials, Brugge, Belgium, June 3-7, Abstract 311.10.1115/DETC2002/DFM-34157 ↗
14. Influence of Winding Speed and Winding Trajectory on Tension in Robotized Filament Winding of Full Section Parts10.1016/j.compscitech.2005.01.007 ↗
15. To Estimate Winding Tension in Asymmetric Shape Parts Manufacturing With Robotized Filament Winding
16. Design of Deposition Head Trajectory for Robotized Filament Winding of Complex Shape Parts10.1115/DETC2004-57774 ↗